Sensio SE30895P0 700x500mm Ultra-Slim Illuminated Mirror Installation Guide

Sensio SE30895P0 700x500mm Ultra-Slim Illuminated Mirror

Ultra-Slim Illuminated Mirror 700x500mm

This product is a slim and stylish illuminated mirror that can be installed in Zone 2 or higher. If it is fitted with a shaver socket, it must be located outside of Zones 0,1 and 2. It has a wattage of 40W and an IP rating of IP44. The product is suitable for indoor use only.

Product Usage Instructions

1. Installation: The driver should be installed inside the wall cavity or loft/ceiling as shown in the instructions. It is recommended to consult a qualified electrician for installation. All electrical installations must be carried out in accordance with current IEE wiring regulations (BS7671).

2. Operation: Once installed, turn on the power and use the mirror as desired.

3. Maintenance: Before cleaning, make sure the power is
   disconnected. Wipe the mirror periodically with a cloth, but do not use harsh chemical solvents.

4. Disposal: This product should not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.

It is important to read and follow all instructions carefully to ensure safe and proper usage of the product. Keep these instructions in a safe place for future reference.

This product is suitable for installation in Zone 2 or higher, unless fitted with a shaver socket as this must be located outside of Zones 0,1 and 2.

Dimension

Included

Dimension

INSTALLTION

Driver Installation Inside The Wall Cavity

INSTALLATION INSTRUCTION

Driver Installation – Inside loft or ceiling

Operation

Dimension

• Product Wattage: 40W
• IP Rating: IP44
• Input Voltage: 240V
• Colour temperature: 2700K ~ 6000K
• EU Representative: Sensio d.o.o, Cesta VI/5, 3320,
• UK Address: Sensio Ltd, Unit 7, Speedwell Road,

WARNING:

• Read these instructions carefully before proceeding. Keep these instructions in a safe place for future reference.

IMPORTANT:

• We recommend that you consult a qualified electrician. All electrical
• Installation must be carried out in accordance with current IEE wiring regulations (BS7671).

SAFETY WARNINGS:

• These products must not be modified in any way or installed in any other way than dictated in these instructions.
• Any modifications may render the product unsafe and will void the products warranty.
• This product is for indoor use only.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)

• The symbol on the product and/or accompanying document, the crossed out wheelie bin, indicates that this product may not be treated as household waste.
• Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.

MAINTENANCE

• Ensure that the power is disconnected prior to cleaning.
• Wipe over with a cloth periodically.
• Do not use harsh chemical solvents, this may dis-colour or damage the finish.

NOTE

• Please ensure you use an appropriate driver with an adequate max wattage.
• Do not overload the LED Driver.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>