Sensio SE105105N0 Radiant 3m LED Flexible Strip Kit Instruction Manual
- June 1, 2024
- Sensio
Table of Contents
Sensio SE105105N0 Radiant 3m LED Flexible Strip Kit
Specifications:
- Product Name : Radiant – Diffused Flexible Strip
- Model Options : SE105105N0, SE10555C0, SE10555N0, SE10555W0
- Product Wattage: 4.8W/m
- IP Rating : IP65
- Light Color Temperature: 3000K, 4000K, 6000K
- Operating Voltage: 24V
Product Usage Instructions:
Surface Mounted Installation:
- Ensure the surface is clean and dry before installation.
- Peel off the adhesive backing of the strip and carefully place it on the desired surface.
- Press along the strip to ensure proper adhesion.
- Connect the power supply following the manufacturer’s instructions.
Inbuilt Installation:
- Make sure the installation area is suitable for inbuilt installation.
- Cut an appropriate slot in the surface for the strip to fit in.
- Secure the strip in the slot using silicone for a snug fit.
- Connect the power supply as per the provided guidelines.
Safety Instructions:
- Do not bend the strip below the specified radius to prevent damage.
- Consult a qualified electrician for installation to ensure safety and compliance with regulations.
- Do not modify the product as it may compromise safety and void the warranty.
- Use the product indoors only and keep it away from moisture.
FAQ:
- Q: Can I replace the light source in the product?
- A : Yes, the light source can be replaced if needed. However, it is recommended to seek professional assistance for this task.
- Q: What should I do if the product is damaged during installation?
- A : In case of any damage during installation, stop using the product immediately and contact customer support for assistance.
Included
Surface Mounted Installation
Recessed Installation
Warning! Do not bend below this radius
DIMENSIONS
Note: SE10595N0/SE10695N0/SE10795N0 come with 1x driver lead.
This product contains a light source of energy efficiency grade F.
The light source in this product will be damaged if it is removed. However, it
can be replaced.
- Product Wattage: 4.8W/m
- IP Rating: IP65
- Input Voltage: 24V
- Colour temperature: 3000K 4000K 6000K
WARNING:
Read these instructions carefully before proceeding. Keep these instructions in a safe place for future reference.
IMPORTANT:
We recommend that you consult a qualified electrician. All electrical Installation must be carried out in accordance with current IEE wiring regulations (BS7671).
SAFETY WARNINGS:
- These products must not be modified in any way or installed in any other way than dictated in these instructions.
- Any modifications may render the product unsafe and will void the product’s warranty.
- This product is for indoor use only.
- Keep out of moisture and use only in dry rooms.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
The symbol on the product and/or accompanying document, the crossed-out wheelie bin, indicates that this product may not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.
MAINTENANCE
- Ensure that the power is disconnected prior to cleaning.
- Wipe over with a cloth periodically.
- Do not use harsh chemical solvents, this may dis-colour or damage the finish.
NOTE
- Please ensure you use an appropriate driver with an adequate max wattage.
- Do not overload the LED Driver.
Sensio Lighting Ltd, Speedwell Road, Castleford, West Yorkshire, United
Kingdom, WF10 5PY
EU Rep.: Sensio Lighting Dublin Ltd, The Black Church, St. Mary’s Place,
Dublin, Ireland, D07 P4AX
- Tel: +44 (0) 1977 522 020
- www.sensio.co.uk