BRITISH GENERAL CFUGA2IL Metal Consumer Unit Instruction Manual

BRITISH GENERAL CFUGA2IL Metal Consumer Unit Instruction Manual

Safety Warning

For your safety, this product must be installed in accordance with local Building Regulations. This product MUST be installed by a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority. Please read carefully and use in accordance with these safety wiring instructions. Before commencing any electrical work ensure the supply is disconnected, and securely locked off. Wiring should be in accordance with the latest edition of the IET regulations (BS 7671).

Note: – Most illustrations relate to a typical Dual RCD unit, exact configuration will depend on type, size and material of consumer unit purchased.
Ensure all screws are fully tightened before use. (Please refer to torque settings table)

Instructions

Torque Settings

Interface Characteristics

General

Tools ­ Screwdriver PZ 2 or Flat screwdriver, knife and pliers. Cleaning ­ use a soft damp cloth with luke warm water (only clean outside of unit). Standards ­ All consumer units have been designed to comply with the requirements of BS EN 61439-3, BS 7671 and Part P document.

Guarantee

BG Electrical Fortress Circuit Protection products are guaranteed against faulty materials and workmanship for a period of 10 years from date of delivery: products will be repaired or (at BG Electricals’ discretion) replacements will be supplied or (at BG Electricals’ discretion) a credit note will be issued. This guarantee is subject to BG Electricals’ conditions of sale and in particular to the following conditions being met:

1. Notification of any defect is given to BG Electrical as soon as reasonably practicable after becoming apparent, and the products then returned to BG Electrical.

2. The products have only been operated under normal operating conditions and have only been subject to normal use.

3. No work (other than normal and proper maintenance) has been carried out to the products without BG Electricals’ prior written consent.

4. The products have been assembled, or incorporated into other goods, by a qualified and recognised electrician and only in
   accordance with any instructions issued by BG Electrical.

5. The defect has not arisen from an item manufactured or supplied by a person other than BG Electrical. This guarantee does not affect any consumer statutory rights. All components used in a BG Electrical enclosure, must be supplied by BG Electrical. The use of any other components will negate compliance to BS EN 61439 and the BG Electrical Guarantee. Failure to fit the enclosure in accordance with these instructions will invalidate the guarantee.

Batch Code Explanation

yyWxx: Manufacturing date code; year of manufacturing (yy) and week of manufacturing (Wxx)

Address/Helpline

Luceco PLC (EU) Luceco SE
Stafford Park 1 C/ Bobinadora 1-5
Telford TF3 3BD  08302 Mataró
ENGLAND SPAIN

If you have further technical assistance you can get in touch with our Technical Helpline on: +44 (0)3300 249 279 technical.support@bgelectrical.co.uk

Environmental Protection

This symbol is known as the “Crossed-out Wheelie Bin Symbol”. When this symbol is marked on a product or battery. It means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>