feifuns B07ZHXD6QS Sport Watch User Guide
- June 9, 2024
- feifuns
Table of Contents
feifuns B07ZHXD6QS Sport Watch
Thank you for purchasing our feifuns spor t watch, please read the
user guide carefully before using.
Note: All feifuns sport watches are water-resistent but never press any
buttons while under water. You can wear the watch to shower or swim but only
limited to the temperature ranges 0 – 50℃(32-122 ℉). When you are not using
the stop watch function please stop the timer and return it to zero. Note that
prolonged use of the timer will result in shortened battery life!
Features
- 50 Meters Waterproof
- Steps/ Calorie/Distance Display
- 12/24H Display
- Stopwatch
- EL Display
- Daily Alarm
- Date and Time(Hour, Minute, Second, Month, Day)
Product activation and installation
Charge the battery
No cable required. Insert the chip mounted end of the watch body into a US B
port to activate the product by charging (be cautious not to reverse the
polarity and comply with the required voltage and current (SV /S00mA)
Please confirm that you plug in the USB in the correct direction during charging, otherwise it won’t charge. When you plug in, it will vibrate to remind you it is charging.
Function introduction
-
Backlight: Press either the top or bottom button once to illuminate the backlight.
-
Timer: Press the top button one time to illuminate the backlight. Then press and hold the top button to enter the timer mode. Press either the top or bottom button to start or pause the timer function. Press and hold either the top or bottom button to exit timer mode.
-
Adjust time, date, year, & 12/24 hour: Press the bottom button one time to illuminate the backlight. Press and hold the bottom button for about three seconds, “Hour” will begin to flash. Use top or bottom buttons to adjust then hold the bottom button to switch to minutes. Again use top or bottom buttons to adjust minutes. Use the same method to continue to set the “Month”, “Date”, “Year”, and the 12 or 24 hour display mode.
-
Steps: Press the top button twice to view the current number of steps recorded. While viewing the current steps press and hold the top button to clear the current steps recorded. Press the bottom key to view the steps taken the previous day and repeat holding the top button to clear the steps taken. Both the current and previous days are not reset to 0.
-
Distance: Press the top button three times to view the current distance recorded.
-
Height and weight: Press the top button three times to enter the distance recorded display then press and hold the bottom button to toggle the Un/En option. (Un selects metric units or centimeter and kilogram while En selects imperial units or foot and pound). The press and hold the bottom button to progress to each setting, then using either the top or bottom buttons adjust to your height and weight and again press and hold the bottom button until completed.
-
Calories: Press the top button four times to view the current calories burned.
-
Alarm clock: Press the top button five times to display the alarm clock. Hold the top button to enable or disable the alarm clock. When disabled it will show “OFF” and when enabled it starts at 09:00.
Once the alarm is enabled hold the bottom button to set the desired alarm time. Press top or bottom to adjust and the hour. To switch to minutes press hold the bottom button, press the top or bottom to adjust the minutes. Once the hour and minutes have been set to the desired time press and hold the bottom button to confirm the alarm time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>