MATCO TOOLS MDMAXTPMS2G TPMS 2.0 Diagnostic Tool User Guide
- June 9, 2024
- MATCO TOOLS
Table of Contents
MDMAXTPMS2G TPMS 2.0 Diagnostic Tool
MAXTPMS 2.0 User Guide
The MAXTPMS 2.0 is a tire pressure monitoring system tool that
is designed to be durable, safe, and reliable when used properly.
This user guide provides important information on the product
specifications, safety instructions, and usage guidelines to ensure
that users can operate the product safely and efficiently.
Specifications
- Battery Type:
- Battery Life:
- Dimensions (Max. L,W,D):
- Case Material:
- Response Frequency:
- Low Battery Indication:
- Weight:
- Temperature:
- Operating Altitude:
Product Content
The MAXTPMS 2.0 Instrument comes with the following
accessories:
- USB cable
- Power supply
- Carrying case
- Quick start guide
Optional accessories include:
- OBDII Module
- Tire Tread Depth Gauge
Safety Instructions
The MAXTPMS 2.0 is intended for use only by qualified and
trained automotive technicians or in a light industrial repair shop
environment. Please read all instructions below before use and
follow these safety instructions:
-
Do not discard the user manual. Retain it for future
reference. -
Read the Warranty, Safety and recycling information at the end
of this user guide. -
The device complies with Part 15 of the FCC Rules, CE/CEM
standards, and ROHS standards. -
Operation is subject to the following two conditions: (1) This
device will not cause harmful interference, and (2) This device
will accept any interference received, including interference that
may cause undesired or improper operation. -
Individuals with pacemakers should never use this product as it
emits electromagnetic and electronically generated waves that may
interfere with the safe operation of pacemakers. -
Do not use on live electrical circuits.
-
Wear safety goggles to avoid the risk of entanglement.
Usage Guidelines
Follow these usage guidelines for proper operation of the
MAXTPMS 2.0:
-
Always read the instructions before use.
-
Use only in accordance with the instructions provided in this
user manual. -
Ensure that the battery is fully charged before use.
-
Use the carrying case to protect the device during
transportation and storage. -
If you have any questions pertaining to the safe or reliable
use of this tool, please call your local dealer.
USER GUIDE
MAXTPMS 2.0
Version MA2-01
Reference: UM-MDMAX-MA2-01
REVISION OF THE MAXTPMS 2.0 GUIDE
Due to continuing improvements, the information contained in this user manual,
the features and design of this device are subject to be changed without prior
notice.
Edition/ Revision
First edition
Reference
Date (week/year)
UM-MDMAX-MA2-01
02/2020
Chapters updated
Software release MA2-01
MATCO TOOLS MAXTPMS 2.0 – User Guide
TABLE OF CONTENTS
REVISION OF THE MAXTPMS 2.0 GUIDE ……………………………………………………………………………………. 3 TABLE OF
CONTENTS……………………………………………………………………………………………………………….. 1 MAXTPMS 2.0
INTRODUCTION…………………………………………………………………………………………………… 2
1. SPECIFICATIONS ………………………………………………………………………………………………………………. 2 2. IMPORTANT
SAFETY INSTRUCTIONS ……………………………………………………………………………….. 3 3. CAUTION
…………………………………………………………………………………………………………………………… 4 4. MAX TPMS 2.0
OVERVIEW…………………………………………………………………………………………………. 5
……………………………………………………………………………………………………………………………………………… 5 5.
CONNECTORS…………………………………………………………………………………………………………………… 5 6. FUNCTION KEYS
……………………………………………………………………………………………………………….. 6 7. POWER ON
……………………………………………………………………………………………………………………….. 6 8. OPERATING
INSTRUCTIONS……………………………………………………………………………………………… 7 MAXTPMS 2.0
USAGE………………………………………………………………………………………………………………… 8 1. CHECK TPM
………………………………………………………………………………………………………………………. 8 2. RESET TPMS
…………………………………………………………………………………………………………………… 11 3. PROGRAM TPMS
SENSORS…………………………………………………………………………………………….. 14 4. KEYFOB TEST
…………………………………………………………………………………………………………………. 23 5. TIRE TREAD CHECK
………………………………………………………………………………………………………… 24 6. PLACARD VALUES ADJUSTMENT
…………………………………………………………………………………… 25
HISTORY………………………………………………………………………………………………………………………………….. 27 1. SEARCH
………………………………………………………………………………………………………………………….. 27 2.
EXPORT…………………………………………………………………………………………………………………………… 28 3. DELETE
…………………………………………………………………………………………………………………………… 28 WIFI UPDATE
…………………………………………………………………………………………………………………………… 29
SETTINGS………………………………………………………………………………………………………………………………… 31 1. LANGUAGE
……………………………………………………………………………………………………………………… 32 2.
UNITS………………………………………………………………………………………………………………………………. 32 3. BACKGROUND
………………………………………………………………………………………………………………… 33 4.
SOUND…………………………………………………………………………………………………………………………….. 34 5. AUTO OFF
……………………………………………………………………………………………………………………….. 34 6. REGION
…………………………………………………………………………………………………………………………… 35 7. WIFI
…………………………………………………………………………………………………………………………………. 36 8.
ABOUT…………………………………………………………………………………………………………………………….. 38 MISCELLANEOUS
……………………………………………………………………………………………………………………. 40 1. CHARGE
………………………………………………………………………………………………………………………….. 40 2.
TROUBLESHOOTING……………………………………………………………………………………………………….. 41 3. TOOL
UPDATE…………………………………………………………………………………………………………………. 41 4. LIMITED HARDWARE
WARRANTY …………………………………………………………………………………… 43 5. SAFETY BATTERY AND CHARGE
INFORMATION …………………………………………………………….. 44
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 1/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
6. FCC STATEMENTS…………………………………………………………………………………………………………… 45 7. RECYCLING
…………………………………………………………………………………………………………………….. 46
INDEX………………………………………………………………………………………………………………………………………. 47
MAXTPMS 2.0 INTRODUCTION
1. SPECIFICATIONS Battery Type: Battery Life: Dimensions (Max. L,W,D): Case
Material: Response Frequency:
Low Battery Indication: Weight: Temperature:
Operating Altitude:
Rechargeable Lithium-Ion. Approximately 300 activations per full charge. 6.45″ x 4.17″ x 1.30″ (164 mm x 106 mm x 33 mm). High Impact ABS. Main frequencies: 315 MHz and 433.92 MHz (supporting most specific frequencies). LCD bar graph display. Approx. 395 grams (0,87 lbs.) Operating: -4°F to 131°F (-20°C to +55°C). Storage: -40°F to 140°F (-40°C to +60°C). Up to 6560 ft (2000 m).
UM-MDMAX-MA2-01
Product content: MAXTPMS 2.0 Instrument. USB cable. Power supply. Carrying
case. Quick start guide.
Optional accessories: OBDII Module. Tire Tread Depth Gauge
User manual MATCO TOOLS MAXTPMS 2.0 Page 2/47
MATCO TOOLS MAXTPMS 2.0 – User Guide 2. IMPORTANT SAFETY INSTRUCTIONS Do not
discard. Retain for future reference. This device complies with: – Part 15 of
the FCC Rules – CE / CEM standards – ROHS standards Operation is subject to
the following two conditions: (1) This device will not cause harmful
interference, and (2) This device will accept any interference received,
including interference that may cause undesired or improper operation.
WARNING: This product emits electromagnetic and electronically generated waves
that may interfere with the safe operation of pacemakers. Individuals that
have pacemakers should never use this product.
WARNING:
Do not use on live electrical circuits. Please read instructions before use.
Wear safety goggles. (User and bystanders). Risk of entanglement.
Read the Warranty, Safety and recycling information at the end of this user
guide.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 3/47
3. CAUTION
MATCO TOOLS MAXTPMS 2.0 – User Guide
PLEASE READ THESE INSTRUCTIONS BEFORE USE
Your Tire Pressure Monitoring (TPM) tool has been designed to be durable,
safe, and reliable when properly used.
All TPMS TOOLS are intended for use only by qualified and trained automotive
technicians or in a light industrial repair shop environment. Please read all
instructions below before use. Always follow these safety instructions. If you
have any questions pertaining to the safe or reliable use of this tool, please
call your local dealer.
1. Read All Instructions
All warnings on the tool and in this manual should be adhered to. All
operating instructions should be followed.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Heed Warnings
Users and bystanders must wear safety goggles and must read instructions
before use. Do not use on live electrical circuits, risk of entanglement.
4. Cleaning
Clean with a soft dry cloth, or if necessary, a soft damp cloth. Do not use
any harsh chemical solvents such as acetone, thinner, brake cleaner, alcohol,
etc as this may damage the plastic surface.
5. Water & Moisture
Do not use this tool where contact or immersion in water is a possibility.
Never spill liquid of any kind onto the tool.
6. Storage
Do not use or store the tool in an area where it is exposed to direct sunlight
or excessive moisture.
7. Usage
To reduce the risk of fire, do not operate the tool in the vicinity of open
containers or flammable liquids. Do not use if the potential for explosive gas
or vapors exists. Keep the tool away from heat generating sources. Do not
operate the tool with the battery cover removed.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 4/47
4. MAX TPMS 2.0 OVERVIEW
MATCO TOOLS MAXTPMS 2.0 – User Guide
5. CONNECTORS
USB connector for battery charge and software update
Extension connector for optional OBD module and Tire Tread Depth Gauge
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 5/47
6. FUNCTION KEYS
MATCO TOOLS MAXTPMS 2.0 – User Guide
Power ON/OFF switch
Test or trigger sensor.
Next, continue or confirm.
Cancel, previous step.
Navigate to select “up”.
Navigate to select “down”.
Navigate to select “left”.
Navigate to select “right”.
7. POWER ON
Press and hold Power ON/OFF switch to turn on the TPMS device,
Displays shows the logo as Fig. 1.
The MAIN MENU will then be displayed as Fig. 2.
Fig. 1 Fig. 2
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 6/47
8. OPERATING INSTRUCTIONS
MATCO TOOLS MAXTPMS 2.0 – User Guide
Service Procedure Section 1.0: Read Sensor Test Before servicing the
tires/wheels, using your TPMS TOOL, trigger each of the vehicle’s sensors to
make sure they are working properly.
This will eliminate the liability associated with replacing previously damaged
or defective sensors. This procedure will not change the vehicle settings
because the vehicle has yet to be put into learn/retraining mode.
This procedure allows you to quickly identify damaged or defective sensors,
because some vehicles do not report a damaged or defective sensor condition on
the instrument cluster for up to 20 minutes. Note: If the sensors do not
trigger, please refer to the Troubleshooting section of this Guide.
Perform tire/wheel service. For vehicles that require retraining, please see
to Section 2.0 Section 2.0: Learning TPM System With the vehicle in learn
mode, begin by triggering the driver’s front left (LF) wheel sensor. Many
vehicles will provide an audible beep confirming that the sensor ID has been
learned by the vehicle on board computer.
The communication between the sensor and the on board computer is also
confirmed on LCD display of the TOOL.
1 Start FL
FR 2
The same procedure should be followed on all wheel sensors, in a clockwise
rotation, until all the vehicle sensors have been retrained.
4 End RL
RR 3
After triggering the driver’s rear wheel sensor, some vehicles will beep twice, indicating that the TPM system has been retrained.
For vehicles that do not require retraining, we recommend you trigger each wheel sensor, one final time, to make sure they are working correctly prior to releasing the vehicle to the customer.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 7/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
MAXTPMS 2.0 USAGE
IMPORTANT:
Vehicle specific information in this manual is used as an example and may not
represent specific instructions each make and model may require. When
performing various functions with the tool, it is important to refer to the
on-screen prompts and/or repair manual information. 1. CHECK TPM
Click the TPMS icon.
1.1. SELECT CAR MANUFACTURER
Select the car manufacturer or scroll to show additional brands.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 8/47
1.2. SELECT CAR MODEL
MATCO TOOLS MAXTPMS 2.0 – User Guide
Select the car model or scroll to show additional
models.
1.3. SELECT YEAR Select the vehicle year.
1.4. SELECT JOB TYPE
This is the main screen for all the TPMS functionalities.
Click the icon related to the action you want to
perform.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 9/47
1.5. CHECK TPM
MATCO TOOLS MAXTPMS 2.0 – User Guide
Click the Check TPM icon.
Click the first wheel you want to check or click the
table to change the selected tire.
Use the trigger button to read the TPMS sensor.
1.6. SAVE VEHICLE DATA
Click the Save icon to record the sensor data.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 10/47
Fill out customer information if needed and
then click Save button.
MATCO TOOLS MAXTPMS 2.0 – User Guide
2. RESET TPMS
Click the Reset icon to reset the TPMS system.
Depending of the type of car, you can either use Manual TPMS reset procedure
or OBDII reset procedure with the optional OBD dongle.
2.1. MANUAL RELEARN PROCEDURE
Click the Manual icon to manualy reset the TPMS
system.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 11/47
Click the Instructions icon and follow the onscreen
instructions.
MATCO TOOLS MAXTPMS 2.0 – User Guide
2.2. OBDII RELEARN PROCEDURE
Click the OBDII icon to reset the TPMS system using the optional OBD
dongle.
Ensure all the TPMS sensors has been read and click the OBDII Transfer icon to
continue.
Click the OBDII icon to display the location of the
OBD socket.
When ready, click the Transfer button.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 12/47
Please wait while the data is transferred to the vehicle.
When Transfer Successful is displayed, the TPMS reset procedure is over.
MATCO TOOLS MAXTPMS 2.0 – User Guide
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 13/47
3. PROGRAM TPMS SENSORS
MATCO TOOLS MAXTPMS 2.0 – User Guide
This section is to create or copy a sensor ID in order to program a spare
blank sensor. If the “old” sensor can be read, use the “COPY SENSOR” section
to recover the existing ID. If it cannot be read, use the “CREATE SENSOR”
section to create a new ID.
In addition, you can use “COPY SET” section to know how to copy four sensors
in a row. “MANUAL ID” function can be used to manually enter the ID number
printed onto the sensor. “RETREIVE ID” offers the ability to read the recorded
sensor ID’s directly from the vehicle ECU and program spare blank sensors
accordingly.
First, select Make, Model and Year of the car.
Then click the Program icon.
Select the programmable sensor you want to use. Scroll down to display
additional sensor brands and models.
Choose OE if you want to display Original Equipment part number and remember
that OE sensors does not require programming. Simply replace sensor(s) and
perform relearn.
Click the Create icon.
Click the question mark icon to display the selected sensor part number.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 14/47
3.1. “CREATE SENSOR” SECTION
MATCO TOOLS MAXTPMS 2.0 – User Guide
Place your blank sensor above the antenna and
then click Program.
Please wait during the programming process.
The data is successfully uploaded to the sensor.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 15/47
3.2. “COPY SENSOR” SECTION
MATCO TOOLS MAXTPMS 2.0 – User Guide
Place original sensor above the antenna and
then click Copy.
Please wait during the copy process.
Then place your blank sensor above the antenna
and press Program.
Please wait during the programming process.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 16/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
The data is successfully uploaded to the sensor.
3.3. “COPY SET” SECTION
Start by reading all the original sensors.
Then program blank sensors one by one by
clicking Program.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 17/47
MATCO TOOLS MAXTPMS 2.0 – User Guide Please wait during the programming
process.
The data is successfully uploaded to the sensor.
Repeat the process for all wheels.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 18/47
3.4. “MANUAL ID” SECTION
MATCO TOOLS MAXTPMS 2.0 – User Guide
Enter the ID of the defective sensor.
Use the DEC / HEX button to switch between
hexadecimal and decimal keyboard.
Place the blank sensor above the antenna and
then click Program.
Please wait during the programming process.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 19/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
The data is successfully uploaded to the sensor.
3.5. “RETRIEVE ID” SECTION This function gives you the possibility to read the
TPMS IDs recorded into the vehicle ECU. You can then easily program blank
sensors. You will need the optional OBDII module to perform this function.
Click the OBDII icon to display the location of the
OBD socket.
When ready, click Retrieve button.
Please wait during the retrieving process.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 20/47
Then program blank sensors one by one by
clicking Program.
MATCO TOOLS MAXTPMS 2.0 – User Guide
Please wait during the programming process.
The data is successfully uploaded to the sensor.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 21/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
Repeat the process for all wheels.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 22/47
4. KEYFOB TEST
MATCO TOOLS MAXTPMS 2.0 – User Guide
This section is to test the strength of the keyfob RF signal.
Click the Keyfob icon to start keyfob test.
Hold keyfob in front of the tool, then press keyfob
buttons to test the signal.
Green bars show a keyfob working within its range to the device. Red bars show
a low signal strength, indicates low battery.
Press Test button to start a new test.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 23/47
5. TIRE TREAD CHECK
MATCO TOOLS MAXTPMS 2.0 – User Guide
This section is to measure the tire tread depth with the optional TTD gauge.
Click the Tire Tread icon to start the test.
Press the trigger button to measure the tread depth.
If the measurement is below the minimum legal standard, the result is
displayed in red.
If displayed in orange, the result is close to minimum legal standard.
Press the trigger button to start a new measurement.
Press Save button to record your TTD job.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 24/47
6. PLACARD VALUES ADJUSTMENT
MATCO TOOLS MAXTPMS 2.0 – User Guide
This section is to adjust internal ECU placard values to accommodate different tire types and sizes.
Click the Placard icon to adjust the values.
Click the OBDII icon to display the location of the
OBD socket.
When ready, click the Retrieve button.
Please wait during the retrieving process.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 25/47
Enter the desired values into the table.
When ready, click Write values button.
MATCO TOOLS MAXTPMS 2.0 – User Guide
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 26/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
HISTORY
This section is to view the job history and access to the search and export
functionalities.
Click the History icon.
Click a record into the list to jump to the saved data.
TPMS sensors detailed information and TTD jobs
are recorded into the device memory.
1. SEARCH Click the Search button to search into the job list.
Edit the fields with your information then press OK
to search.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 27/47
2. EXPORT Click the Export button.
MATCO TOOLS MAXTPMS 2.0 – User Guide
Click Export button to send the job history to the PC.
Please wait during the export process.
3. DELETE Click the Delete button to erase a record from the job list.
Tick the records you want to delete then press OK to
apply.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 28/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
WIFI UPDATE
This section is to update the software of the TPMS tool to get new coverage
and new features.
First ensure to correctly setup your TPMS device WiFi connection before
attempting to wirelessly update. Go to WiFi settings section in this guide to
check how to proceed.
Click the Update icon.
You will be notified if a new software update if available for your tool.
Ensure your battery is at a minimum of 50% charge.
When you are ready, click the Update button to proceed.
Please wait during the update process and do not
turn off your tool.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 29/47
You will be notified when the update is done.
Click Restart to reset your device and complete the
update process.
MATCO TOOLS MAXTPMS 2.0 – User Guide
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 30/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
SETTINGS
This section is to change multiple different settings such as language, units,
region, WiFi connectivity and to check software version.
Click the Settings icon.
Select function or settings you want to check or modify.
Key functional descriptions: LANGUAGE: change the language of the tool interface. UNITS: change air pressure, temperature, tread depth and sensor ID display units. BACKGROUND: change the background image. SOUND: turn sound to ON or OFF. AUTO OFF: time to turn off the device automatically after not being operated. REGION: select the area of work, AMERICA, EUROPE, JAPAN, KOREA. WIFI: configure WiFi settings to connect your TPMS tool to the Internet for wireless updates. ABOUT: display the current software version and information about the device.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 31/47
1. LANGUAGE
Click the Language icon.
MATCO TOOLS MAXTPMS 2.0 – User Guide
Change the language and press
OK to apply
Please wait during the loading of the new selected language. 2. UNITS
Click the Units icon.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 32/47
Change the values and press OK to apply
MATCO TOOLS MAXTPMS 2.0 – User Guide
For ID sensor display, the TPMS tool apply the following rule: HEXADECIMAL:
force to display sensor ID in hexadecimal (0 to F). DECIMAL: force to display
sensor ID in decimal (0 to 9). AUTO: display sensor ID as sent by the sensor.
3. BACKGROUND
Click the Background icon.
Change the value and press OK to apply
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 33/47
4. SOUND
MATCO TOOLS MAXTPMS 2.0 – User Guide
When sound on is set to ON, a beep is triggered when the sensor is detected.
Click the Sound icon.
Change the value and press OK to apply
5. AUTO OFF Click the Auto Off icon.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 34/47
MATCO TOOLS MAXTPMS 2.0 – User Guide Change the value and
press OK to apply
Change by 60 min (maximum) to DISABLED (never). 6. REGION
Click the Region icon.
Change the value and press OK to apply
Please wait during the loading of the new database for the selected zone.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 35/47
7. WIFI
MATCO TOOLS MAXTPMS 2.0 – User Guide
Click the WiFi icon.
The device shows the connection status.
Press Scan Networks to search WiFi networks.
Please wait during the WiFi scanning process.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 36/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
Select the WiFi network you want to use for wireless updates.
Enter the WiFi password for the selected network. Use the Numbers / Letters
button to switch between
keyboards.
Please wait during the WiFi connection process.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 37/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
The device confirms the connection.
By going back to the WiFi settings menu you can check the connection status
and change the selected WiFi network if needed.
8. ABOUT This menu displays the current software version and information
about the device.
Click the About icon.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 38/47
Press OK to exit.
MATCO TOOLS MAXTPMS 2.0 – User Guide
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 39/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Battery indicator status:
Your TPMS TOOL incorporates a low battery detection circuit. Battery life is an average of 300 sensor tests per battery charge (approximately 60 to 80 vehicles) this may change depending on the sensor model.
0% 25% 50% 75% 100%
When 0% is flashing, the tool will turn off after 10 seconds.
The battery is charging.
There is an issue with the battery please contact after sales service.
DO NOT use the tool with low battery status because the transmission and
emission may not be reliable.
Universal power supply for charging
USB cable for charging and updating
USB power supply connector
When the battery is low, the “battery status” appears every 10 seconds. This
display will stop when the battery gains power. Plug the USB cable between the
tool and the charger adapter, and then plug the charger
adapter into an appropriate outlet. The battery icon will change to
Battery replacement The tool must be returned to the factory for battery
replacement. Opening the tool or tampering with the seal placed on the tool,
if broken, will void the warranty
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 40/47
2. TROUBLESHOOTING
MATCO TOOLS MAXTPMS 2.0 – User Guide
If the TPMS TOOL is unable to trigger one or more of the sensors, please use
the following troubleshooting procedure: 1) The vehicle does not have a sensor
even though a metal valve stem is present. Be aware of rubber style snap-in
stems used on TPMS systems.
2) The sensor itself may be damaged or defective. 3) Wrong make, model, year
selected. 4) Your TPMS TOOL may require a software upgrade. 5) Your TPMS TOOL
is damaged or defective. Please contact your tool supplier for further
assistance.
3. TOOL UPDATE
Updating your TPMS TOOL When a new protocol becomes available, it will become
necessary to updatate your tool. Please follow the steps below:
3.1. WIFI UPDATE
The best and seamless option to update your TPMS tool is to use the WiFi
update function. Please refer to the dedicated section into this guide to
update your tool wirelessly.
3.2. INSTALL WEB VT PC SUITE
Another option to update your TPMS tool is to use the Web VT PC suite. 1)
Visit www.maxtpms2.com/software and download the Web VT software. 2) Click on
the Web VT icon to start the installer program. 3) A screen will appear that
says “Welcome to the Install Shield Wizard for Web VT.” Click “Next >” 4) A
window will appear for choosing the destination location, click “Next >” 5)
Follow the instructions until the window with the “Finish” button appears. 6)
Click “Finish” when the Web VT installation is complete.
Note: To order annual software license update, please see your dealer for
availability and pricing.
IMPORTANT: Temporarily turn off all anti-virus and spam blocking software on
your computer. This is necessary to ensure a successful update.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 41/47
3.3. USB UPDATING WITH WEB VT
MATCO TOOLS MAXTPMS 2.0 – User Guide
Before updating, ensure that the TPMS tool battery reach at least 50% charge.
- Connect the USB cable from the TPMS TOOL to the PC, and turn the device on.
- Start Web VT software. 3) A screen will appear indicating “Update Device”.
- You can also export job data from here as well. 5) Press “Yes” to update to the latest software version. The update will take several minutes to complete and the status bar will indicate the percentage of update completed.
Warning!
Turn off the screen saver function on your PC and do not disconnect the TPMS
TOOL from the PC or turn off your computer during the update process. Doing so
could result in serious damage to the tool.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 42/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
4. LIMITED HARDWARE WARRANTY
Matco Tools Limited Hardware Warranty
Matco Tools warrants to the original purchaser that your Matco Tools hardware
product shall be free from material and workmanship defects for the length of
time identified on your product package and/or contained in your user
documentation, from the date of purchase. Except where prohibited by
applicable law, this warranty is nontransferable and is limited to the
original purchaser. This warranty gives you specific legal rights, and you may
also have other rights that vary under local laws.
Remedies
Matco Tools’ entire liability and your exclusive remedy for any breach of
warranty shall be, at Matco Tools’ option, (1) to repair or replace the
hardware, or (2) to refund the price paid, provided that the hardware is
returned to the point of purchase or such other place as Matco Tools may
direct with a copy of the sales receipt or dated itemized receipt. Shipping
and handling charges may apply except where prohibited by applicable law.
Matco Tools may, at its option, use new or refurbished or used parts in good
working condition to repair or replace any hardware product. Any replacement
hardware product will be warrantied for the remainder of the original warranty
period or thirty (30) days, whichever is longer or for any additional period
of time that may be applicable in your jurisdiction.
This warranty does not cover problems or damage resulting from (1) accident,
abuse, misapplication, or any unauthorized repair, modification or
disassembly; (2) improper operation or maintenance, usage not in accordance
with product instructions or connection to improper voltage supply; or (3) use
of consumables, such as replacement batteries, not supplied by Matco Tools
except where such restriction is prohibited by applicable law.
How to Obtain Warranty Support
Before submitting a warranty claim, we recommend you visit the support section
at https://matco.carscan.com/Support/Warranty for technical assistance. Valid
warranty claims are generally processed through the point of purchase during
the first thirty (30) days after purchase; however, this period of time may
vary depending on where you purchased your
product please check with Matco Tools or the retailer where you purchased
your product for details. Warranty claims that cannot be processed through the
point of purchase and any other product related questions should be addressed
directly to Matco Tools. The addresses and customer service contact
information for Matco Tools can be found in the documentation accompanying
your product and on the web at https://matco.carscan.com/Support/Warranty
Limitation of Liability
MATCO TOOLS SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOSS OF
PROFITS, REVENUE OR DATA (WHETHER DIRECT OR INDIRECT) OR COMMERCIAL LOSS FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON YOUR PRODUCT EVEN IF MATCO TOOLS
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some jurisdictions do not
allow the exclusion or limitation of special, indirect, incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
Duration of Implied Warranties
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY OR FITNESS ON THIS HARDWARE PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THE APPLICABLE LIMITED WARRANTY PERIOD FOR YOUR
PRODUCT. Some jurisdictions do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
National Statutory Rights
Consumers have legal rights under applicable national legislation governing
the sale of consumer goods. Such rights are not affected by the warranties in
this Limited Warranty.
No Other Warranties
No Matco Tools dealer, agent, or employee is authorized to make any
modification, extension, or addition to this warranty.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 43/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
Warranty Periods
Please note that in the European Union, any warranty period less than two
years shall be increased to two years.
5. SAFETY BATTERY AND CHARGE INFORMATION
You must read and understand these safety instructions and warnings before
using or charging your lithium-Ion batteries.
Operating environment
Remember to follow any special current regulations any area, and always switch
off your device when its use is prohibited or when it may cause interference
or danger.
Use the device only in its normal operating positions.
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
About Charging
Only use the charger supplied with your device. Using another type of charger
will result in malfunction and/or danger.
When the red LED turns off, the charge is complete.
About the Charger
Do not use the charger in a high moisture environment. Never touch the charger
when your hands or feet are wet.
Allow ventilation around the charger when using it. Do not cover the charger
with paper or other objects that will reduce cooling. Do not use the charger
while it is inside a carrying case.
Connect the charger to a proper power source. The voltage requirements are
found on the product case and/or packaging.
Do not use the charger if the wires become damaged. Do not attempt to service
the unit. There are no serviceable parts inside. Replace the unit if it is
damaged or exposed to excess moisture.
This charger is not a toy and should not be used by children or infirm persons
without proper training or supervision.
Do not use it as a power source.
Unplug it before attempting to service or clean it.
About the Battery
CAUTION: This unit contains an internal Lithium-Ion battery. The battery can
burst or explode, releasing hazardous chemicals. To reduce the risk of fire or
burns, do not disassemble, crush, pierce or dispose of the battery or the
instrument in fire or water, do not short circuit or short the contacts with a
metal object.
Use a specified charger approved by the Matco Tools manufacturer and supplied
with the device.
The tool must be returned to the factory for battery replacement.
Opening the tool or tampering with the seal placed on the tool, if broken,
will void the warranty
Safety for Lithium-Ion battery use
NEVER leave the battery unattended during the charging process. The device
must imperatively be placed on a non-flammable surface during charging
(ceramic platter or metal box).
Charge the Lithium-Ion battery ONLY with the charger provided.
NEVER use a Ni-MH (Nickel Metal Hydride) type battery charger to charge a
Lithium-Ion battery.
If the battery begins to overheat more than 60°C (140°F), STOP CHARGING
IMMEDIATELY. The battery should NEVER exceed 60°C (140°F) during the charging
process.
NEVER charge the battery immediately after use and while still hot. Leave it
cool down to ambient temperature.
If you see any smoke or liquid coming from the battery, stop the charge
immediately. Disconnect the charger and place the tool in an isolated area for
at least 15 minutes. DO NOT USE THE BATTERY AGAIN. Return the device to your
retailer.
Keep a fire extinguisher for electrical fires handy while charging the
battery. In the unlikely event that the Lithium-Ion battery catches fire, DO
NOT use water to extinguish the fire. Take some sand or use a fire
extinguisher as described above.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 44/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
The Lithium-Ion battery elements must be neutralized to be made unusable. The
neutralization process must be performed under strict safety conditions. It is
recommended that you return the tool to us. We will extract the battery and
give it to a specialized recycler.
Do not dispose of Lithium-Ion batteries with your general waste.
The Lithium-Ion battery is not suitable for children under 14 years. Keep all
Lithium-Ion batteries out of the reach of children
To prevent leakage or other hazards, do not store batteries above 60°C
(140°F). Never leave the battery inside a car (for example) where the
temperature could be very high or in a place where temperatures could exceed
60°C (140°F). Store the battery in a dry place to avoid contact with liquid,
whatever the type. Only store the battery on a nonflammable surface, heat
resistant, non conductive and away from all flammable materials or sources.
Always store the battery out of the reach of children.
A Lithium-Ion battery should be stored with a minimum charge of 30%. If you
store it completely discharged, it will quickly become unusable.
Failure to follow these safety precautions may cause serious personal injury
and damage to property. You may even cause a fire!
The Matco Tools Company disclaims any responsibility for damage sustained in
the event of non compliance with these safety instructions.
Using a Lithium-Ion battery has a high risk of fire and can cause serious
damage to property and persons. The user agrees to accept the risk and
responsibility.
The Matco Tools Company is not able to monitor the proper use of the battery
with each customer (charge, discharge, storage etc.). It cannot be held
responsible for any damage to persons or property.
6. FCC STATEMENTS
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 45/47
MATCO TOOLS MAXTPMS 2.0 – User Guide 7. RECYCLING
Do not dispose of the rechargeable Lithium-Ion battery or the tool and/or its
accessories in the general waste.
These components must be collected and recycled. The crossed-out wheeled waste
bin means that the product must be taken to separate collection at the end of
the product’s service life. This applies to your tool and also to any
enhancements marked with this symbol. Do not dispose of these products as
unsorted municipal waste. For further information, please contact Matco Tools.
MATCO TECH SUPPORT
US: 888-621-8767 (English) Canada:
877-666-5325 (English/French) Email
address: help@supporttpms.com For more information, guide and videos visit:
www.maxtpms2.com
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 46/47
MATCO TOOLS MAXTPMS 2.0 – User Guide
INDEX
A About………………………………………………………………………. 38 Accessories……………………………………………………………….. 2
Auto OFF…………………………………………………………………. 34
B Background ……………………………………………………………… 33 Battery……………………………………………………………………..
43
C Caution………………………………………………………………… 4, 43 Charge ……………………………………………………………………. 39
Charger …………………………………………………………………… 43 Charging…………………………………………………………….. 39, 43
Check TPM ……………………………………………………………… 10 Copy sensor …………………………………………………………….. 16
Copy set ………………………………………………………………….. 17 Create sensor……………………………………………………… 14,
15 Customer information data …………………………………………. 11
D Delete record……………………………………………………………. 28
E Environment …………………………………………………………….. 43 Export history
…………………………………………………………… 28 Export job data …………………………………………………………. 41
F FFC Statements ……………………………………………………….. 44 Function keys
…………………………………………………………….. 6
H History …………………………………………………………………….. 27
K Keyfob test ………………………………………………………………. 23
L Language ………………………………………………………………… 32
M Main Menu ………………………………………………………………… 8 Manual ID………………………………………………………………… 19
Manual relearn …………………………………………………………. 11
O OBD socket location………………………………………………….. 12 OBDII relearn
…………………………………………………………… 12 OE part number………………………………………………………… 14 Operating
instructions …………………………………………………. 7 Overview …………………………………………………………………… 7
P Placard values adjustment …………………………………………. 25
Power supply…………………………………………………………….43 Product content
…………………………………………………………..2 Program sensor…………………………………………………………14
R Read TPMS sensor ……………………………………………………10 Recycling ………………………………………………………………….
45 Region ……………………………………………………………………..35 Reset TPMS
……………………………………………………………..11 Retrieve ID ……………………………………………………………….20
S Safety instructions ……………………………………………………….3 Safety
precautions……………………………………………………..43 Save vehicle data ………………………………………………………10
Search record……………………………………………………………27 Security ……………………………………………………………………43
Select car manufacturer ……………………………………………….8 Select car
model………………………………………………………….9 Select job type…………………………………………………………….9 Select
vehicle year ………………………………………………………9 Sensor ID display ………………………………………………………33
Sensor part number……………………………………………………14 Settings ……………………………………………………………………31
Software installation …………………………………………………..40 Software license
………………………………………………………..40 Software updating………………………………………………………40 Sound
………………………………………………………………………34 Specifications ……………………………………………………………..2
T Tire tread check…………………………………………………………24 Tool update
………………………………………………………………40 Troubleshooting ………………………………………………………… 40
U Units ………………………………………………………………………..32 USB software
update………………………………………………….41 Use Instructions…………………………………………………………..4
W Warning ……………………………………………………………………..3 Warranty …………………………………………………………………..
42 Web VT PC suite ……………………………………………………….40 WiFi setup
………………………………………………………………..36 WiFi update ………………………………………………………………29
Z Zone ………………………………………………………………………..35
UM-MDMAX-MA2-01
User manual MATCO TOOLS MAXTPMS 2.0 Page 47/47
This document is the exclusive property of Matco Tools. It may not be communicated, reproduced or used without prior consent.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>