MATCO TOOLS ZBEC250 End Cut Bust N Out Extractor User Guide

MATCO TOOLS ZBEC250 End Cut Bust N Out Extractor

A system specifically designed for the successful removal of sub-surface broken bolts and studs. Each tool is made for specific bolt hole sizes to properly prepare the broken sure face, greatly increasing the operator’s ability to drill the broken bolt on center saving the existing threaded hole and the component.
Bust-N-Out carbide burrs are designed for use in high-speed die grinders. Right angle dis grinders provide the operator with proper speeds and best control, Carefully keep to orientation straight to the surface of the broken bolt to achieve the best results.

Set  ZBEC5

Set ZBEC5 – provides 5 specialty end-cutting carbide burrs to properly prepare (flatten) the rough surface of the broken bolt. Use in a high-speed right- angle die grinder, careful to keep burr orientation straight to the surface being ground. The broken surface will now be properly prepared for OP? to Innate the broken bolts centerline.

MATCO #

• ZBEC250
• ZBEC312
• ZBEC375
• ZBEC437
• ZBEC 500

Bolt Size

• 1/4-20, 24, 28, M6
• 5/16-18, 24, 32, M8
• 3/8-16, 24, M1O
• 7/16-14, 20, M12
• 1/2-13, 20, M14

Set ZBCDS

Set ZBCDS – provides S specialty angle ground burs for use after OP I, will prop- lv locate broken bolts center point providing the greater ability for the drilling operation to drill in the center.

MATCO#

• ZBCD250
• ZBCD312
• ZBCD375
• ZBCD437
• ZBCDS00

Bolt Size

• 1/4-20, 24, 28, M6
• 5/16-18, 24,3 2, M8
• 3/8-16, 24, MI0
• 7/16-14, 20, M12
• 1/2-13, 20, M14

Set ZBDR4

Set ZBDR4- provides 4 solid carbide drills for drilling operation, for acceptance standard straight flute extractors (not provided). Solid carbide drills will drill in hardened trials. Use with drilling speeds, very carefully drill with no side pressure to the drill.

MATCO # Dia.

• ZBDR125 1/8
• ZBDR187 3/16
• ZBDR234 15/64
• ZBDR312 5/16

for Extractor Size (Not Included)

• SEI #1
• SE2 #2
• SE3 #3
• SE4 #4

Always wear proper safety glasses and equipment when operating any cutting tool.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>