BOSCH Kiox 300 BHU3600 Smart Display Instruction Manual
- June 9, 2024
- Bosch
Table of Contents
BOSCH Kiox 300 BHU3600 Smart Display
Product Information
The Kiox 300 (BHU3600) is a bord computer product from Bosch eBike Systems. The product is manufactured by Robert Bosch GmbH in Reutlingen, Germany. The product code for the Kiox 300 is 0 275 007 3BK and it was produced in March 2022. The Kiox 300 is compatible with all original Bosch eBike rechargeable battery packs. The product comes with a display that can be mounted and removed easily. It has a status screen that displays the battery charge level, bike lighting status, time, and connection status. The display brightness can be adjusted to ensure visibility of important information while riding. The Kiox 300 has a protection rating of IP54 and weighs approximately 32 grams. The product manual provides detailed information on safety instructions, maintenance, cleaning, transportation, and disposal.
Product Usage Instructions
Before using the Kiox 300, read and follow all the safety instructions and directions contained in the product manual.
- To mount the display, place it on the handlebar and push it down until it clicks into place (refer to image A).
- To remove the display, press the release button on the back of the mount and lift the display up (refer to image A).
- To secure the display, insert the security plate into the mount and turn it clockwise until it clicks (refer to image B).
- Do not attempt to secure the display or operating unit while riding.
- Do not allow yourself to be distracted by the on-board computer’s display. If you need to make entries other than switching the assistance level, stop and enter the appropriate data.
- Do not use your smartphone while riding. Only enter the relevant data having stopped first.
- Set the display brightness so that you can adequately see important information such as speed and warning symbols.
- Do not open the on-board computer as it may damage it beyond repair and void any warranty claims.
- Do not use the on-board computer as a handle to lift the eBike as it can cause irreparable damage to the on-board computer.
For maintenance, cleaning, transportation, and disposal instructions, refer to the product manual.
Safety instructions
- Read all the safety information and instructions. Failure to observe the safety information and follow instructions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch
eBike rechargeable battery packs.
- Read and observe the safety warnings and directions contained in all the eBike system operating instructions and in the operating instructions of your eBike.
- Do not attempt to secure the display or operating unit while riding.
- Do not allow yourself to be distracted by the on-board computer’s display. If you do not focus exclusively on the traffic, you risk being involved in an accident. If you want to make entries in your on-board computer other than switching the assistance level, stop and enter the appropriate data.
- Do not use your smartphone while riding. If you do not focus exclusively on the traffic, you risk being involved in an accident. Only enter the relevant data having stopped first.
- Set the display brightness so that you can adequately see important information such as speed and warning symbols. Incorrectly set display brightness may lead to dangerous situations.
- Do not open the on-board computer. Opening the on-board computer may damage it beyond repair and void any warranty claims.
- Do not use the on-board computer as a handle. Lifting the eBike up by the on-board computer can cause irreparable damage to the on-board computer.
- Do not stand your bicycle upside down on its saddle and handlebars if the on-board computer or its holder protrude from the handlebars. This may irreparably damage the on-board computer or the holder. Also remove the on-board computer before placing the bicycle on a wall mount to ensure that the on-board computer does not fall off or become damaged.
Privacy notice
If the on-board computer is sent to Bosch Service because it requires
servicing, the data stored on the on-board computer may be transmitted to
Bosch.
Product description and specifications
Intended use
The Kiox 300 on-board computer is designed to display cycling data. To access the full functionality of the Kiox 300 on-board computer, you will need a compatible smartphone installed with the eBike Flow app (available from the Apple App Store or the Google Play Store).
Product features
The numbering of the components shown refers to the illustrations on the graphics pages at the beginning of the manual.
- Display
- Cable outlet
- Removal blocker
- Snap-in hook
- Adapter tray
- Display contacts
- Holder contacts
- Display mount
- Display mount fastening screw
- Bridge for retaining strapa)
- The retaining strap is not included in the scope of delivery.
Technical data
- Temperatures outside of this range may cause faults in the display.
The licence information for the product can be accessed at the following Internet address: https://www.bosch-ebike.com/licences
Assembly
Fitting and Removing the Display
To fit the display (1), attach the display (1) to the
front edge of the display mount (8) in the direction of travel, on the snap-in
hook (4) ❶ and press the rear side of the display (1) on the display mount (8)
❷. To remove the display (1), pull the display (1) towards you until you are
able to lift off the display (1) ❷. A retaining strap can be secured to the
bridge (10). Note: The eBike system will switch off if you are riding at under
3 km/h and remove the on-board computer from its holder. This does not apply
to eBikes with assistance up to 45 km/h.
Inserting the Removal Blocker
Note: Depending on the design/mounting of the
display mount, it may not be possible to insert the removal blocker. The
display must be mounted.
Insert the removal blocker (3) into the adapter tray (5) from below until you
hear the removal blocker (3) click into place. From this point onwards, you
can no longer lift off the display (1) from the display fixture (8) without
removing the display mount (8) from the adapter tray (5) by loosening the two
fastening screws (9).
Note: The removal blocker (3) is not an anti-theft device.
Operation
The displays are operated and the indicators are controlled via a control
unit. The meaning of the buttons on the operating unit for the display
indicators can be found in the following overview. Depending on how long it is
pressed for, the select button has two functions.
- Scroll to the left
- Scroll to the right
- Scroll up
- Scroll down
- Change to the second page level (press briefly) Open the settings menu on the status page (press briefly)
- ****Open page-related options
e.g. (press and hold > 1 s)
Please note: All screenshots showing the display and text on the following pages are from the approved software version. The display and/or text may change slightly following a software update.
Status page
From the start page, you can access the status page by pressing the button.
- a Battery charge
- b Assistance level
- c Bicycle lights
- d Time
- e Connection indicator
- f Smartphone connection
- g Connection status
- h Settings Menu
You can access the settings menu from this page by pressing the button.
Note: The settings menu cannot be called up while riding.
The
-
-
< Range reset>
The value for the range can be reset here. -
< Auto trip reset>
The settings for automatic reset can be adjusted here. -
< Wheel circumf.>
The value of the wheel circumference can be adjusted or reset to the standard setting here. -
< Service>
The next service date is shown here, provided that it has been set by the bicycle dealer. -
< Components>
The components used with their version numbers are displayed here. -
You can find the following menu items here. -
You can choose between the, -
< Language>
You can select your preferred system language here. -
< Units>
You can choose between metric or imperial measurements here. -
< Time>
You can set the time here. -
< Time format>
You can select one of the two time formats here. -
You can set the display brightness here. -
You can reset all of the system settings to the default values here. -
Under the
menu item, you will find the contact details ( ) and certificates
(
You can leave the settings menu by pressing the button or the button. Press the button to access the start page.
Start page
If you did not select another page before the last time you switched off, you
will be shown this page.
- a Battery charge
- b Assistance level
- c Bicycle lights
- i Unit of speed indicator
- j Indicator name
- k Your performance
- l Speed
- m Motor output
The a … c indicators form the status bar and are shown on every page. You can
use the button to change from this page to the status page or press the button
to access additional pages. The statistical data, battery range and average
values are displayed on these pages. From each of these pages, you can access
the second level of data by pressing the button. If the user is on a different
page to the start page when they switch off, the most recently displayed page
will appear again when the eBike is switched on. Pressing and holding the
select button enables you to re-set the statistical data for your journey or
excursion (not on the
Maintenance and servicing
Maintenance and cleaning
Do not clean any of the components with pressurized water. Keep the screen of your on-board computer clean. Dirt can cause faulty brightness detection. Clean your on-board computer using a soft cloth dampened only with water. Do not use cleaning products of any kind. Have your eBike system checked by an expert at least once a year (including mechanical parts, up-to-dateness of system software). In addition, the bicycle dealer may base the service date on the distance travelled and/or on a period of time. In this case, the on-board computer displays a message telling you when the service date is due each time it is switched on. Please have your eBike serviced and repaired by an authorized bicycle dealer.
- Have all repairs performed only by an authorized bike dealer.
Note: If you are handing in your eBike to a bicycle dealer for
maintenance, it is recommended that you temporarily deactivate the <eBike
Lock> and
After-sales service and advice on using products
If you have any questions about the eBike system and its components, contact
an authorized bicycle dealer. For contact details of authorized bike
dealerships, please visit www.bosch-ebike.com.
Transport
- If you transport your eBike attached to the outside of your car, e.g. on a bike rack, remove the on-board computer and the eBike battery to avoid damaging them.
Disposal
- The drive unit, on-board computer incl. operating unit, battery, speed sensor, accessories and packaging should be disposed of in an
environmentally correct manner.
Check that your personal data has been deleted from the device. Do not dispose of eBikes and their components with house-hold waste.
- In accordance with Directive 2012/19/EU and Directive 2006/66/EC respectively, electronic devices that are no longer usable and
defective/drained batteries must be collected separately and recycled in an environmentally friendly manner.
Please return Bosch eBike components that are no longer usable free of charge
to an authorized bicycle dealer or to a recycling facility.
Subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>