Harley Benton Vintage Phase User Guide
- June 9, 2024
- Harley Benton
Table of Contents
Harley Benton Vintage Phase User Guide
Safety instructions
Intended use
This device is intended to be used for sound processing of signals from
musical instruments with electromagnetic pickups. Any other use or use under
other operating
conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from
improper use.
[](https://manuals.plus/wp-content/uploads/2023/04/Harley-Benton-
Vintage-Phase-User-Guide_2.png)Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! Never let children unattended use electrical devices.
[](https://manuals.plus/wp-content/uploads/2023/04/Harley-Benton-
Vintage-Phase-User-Guide_3.png)External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device
and possibly the user. Unplug the external power supply before electrical
storms occur and when the device is unused for long periods of time to reduce
the risk of electric shock or fire.
Risk of fire due to incorrect polarity Incorrectly inserted batteries may
destroy the device or the batteries. Ensure that proper polarity is observed
when inserting batteries.
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device. Take batteries out
of the device if it is not going to be used for a longer period.
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Effects pedal for electric guitars
- Phaser
- Speed control
- Power supply via 9-V block battery (not included, item 417473) or power adapter (not included, item no. 409939)
Controls and connections
Controls and connections
-
DC 9V Connection for the external power supply with 9 V DC.
When an external power supply is used, the battery supply is cut off automatically. -
SPEED Turn this control clockwise to increase the speed of the effect.
-
IN 1/4″ jack socket to connect instruments
-
TRUE BYPASS Foot switch for enabling or disabling the pedal function
-
This LED lights when the effects pedal is used. When the LED is off or dim while the effects pedal is used, the battery is exhausted and must be replaced.
-
OUT 1/4″ jack socket to connect an amplifier
Technical specifications
- Input connections Socket for power adapter 1/4″ jack socket
- Input impedance 500 kΩ
- Output connections 1/4″ jack socket
- Output impedance 10 kΩ
- Current consumption 13 mA
- Power supply External power adapter, 100 – 240 V ~ 50/60 Hz
- Power adapter Secondary current 200 mA Secondary voltage 9 V ____ Polarity centre negative
- Battery 9-V block battery
- Degree of protection IP20
- Dimensions (W × H × D) 72 mm × 55 mm × 120 mm
- Weight 280 g
- Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing
For the transport and protective packaging,
environmentally friendly materials have been chosen that can be supplied to
normal recycling. Ensure that plastic bags, packaging, etc. are properly
disposed of. Do not just dispose of these materials with your normal household
waste, but make sure that they are collected for recycling. Please follow the
notes and mark- ings on the packaging.
Batteries must not be disposed of as domestic waste or
thrown into fire. Dispose of the batter- ies according to national or local
regulations regarding hazardous waste. To protect the envi- ronment, dispose
of empty batteries at your retail store or at appropriate collection sites.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal house- hold waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>