CRESTRON DIN-GWDL-SPLTR Digital Lighting Gateway and Splitter DIN Rail Mount User Manual

DIN-GWDL-SPLTR Digital Lighting Gateway and Splitter DIN Rail Mount

Product Information

The DIN-GWDL and DIN-GWDL-SPLTR are digital lighting gateways and splitters designed for DIN rail mounting. These products comply with part 15 of the FCC Rules and have been tested to comply with specifications for CE marking. They also contain open-source software.

Getting Started

Before starting installation, it is important to read all instructions completely. Failure to follow all wiring guidelines may result in failure or damage to the system. Test the system prior to installing the ceiling, as correcting wiring faults may require the removal of the ceiling.

Scan the QR code provided to view product documentation which includes wiring guidelines for installation.

Certification and Compliance

These products comply with part 15 of the FCC Rules and have been tested to comply with specifications for CE marking. Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

If interference is experienced, users are encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting a dealer or an experienced radio/TV technician for help.

These products also comply with CAN ICES-3 (B)/NMB-3(B) regulations set by Industry Canada (IC).

Legal:
The original language version of this document is U.S. English.
All other languages are a translation of the original document. The product warranty can be found at www.crestron.com/warranty. The specific patents that cover Crestron products are listed online at
www.crestron.com/legal/patents.

Product Usage Instructions

1. Read all instructions and view wiring guidelines in the product documentation before starting installation.
2. Test the system prior to installing the ceiling.
3. Correct any wiring faults before installing the ceiling, as this may require the removal of the ceiling.
4. Scan the QR code provided to view product documentation which includes wiring guidelines for installation.
5. Ensure compliance with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B) regulations set by Industry Canada (IC).
6. If interference is experienced, try reorienting or relocating the receiving antenna, increasing the separation between equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting a dealer or an experienced radio/TV technician for help.

Digital Lighting Gateway and Splitter, DIN Rail Mount

Getting Started

WARNING: Read all instructions completely before starting installation.

• View the wiring guidelines in the product documentation.
• Failure to follow all wiring guidelines may result in failure or damage to the system.
• Test the system prior to installing the ceiling. Correcting wiring faults may require the removal of the ceiling.

Scan the QR code to view product documentation.

Certification and Compliance

• Regulatory Model: DIN-GWDL, DIN-GWDL-SPLTR

Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules.

Operation is subject to the following conditions:

1. This device may not cause harmful interference and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement

CAN ICES-3 (B)/NMB-3(B)
As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.

This product is Listed to applicable UL® Standards and requirements tested by Underwriters Laboratories Inc.

The Waste Electrical & Electronic Equipment
(WEEE) directive marking on a product indicates that it should not be disposed of with general waste. Instead, you are encouraged to reuse or recycle the product in accordance with Directive 2012/19/EU of the European Union. Proper disposal of this product will help prevent potential negative effects on the environment and human health, which could otherwise be caused by inappropriate waste handling. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. For information about recycling this product, please contact your household waste disposal service, your original distributor, or Crestron.

Legal
The original language version of this document is U.S. English.
All other languages are a translation of the original document.
The product warranty can be found at: www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at: www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. UL and the UL logo are either trademarks or registered trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
©2022 Crestron Electronics, Inc.

Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647 Tel: 888.CRESTRON
Fax: 201.767.7656
Website: www.crestron.com

References

• Control Systems for Home Automation, Campus & Building Control by Crestron Electronics [Crestron Electronics, Inc.]
• Patents [Crestron Electronics, Inc.]
• Open Source Software [Crestron Electronics, Inc.]
• Standard Terms & Conditions and Warranties [Crestron Electronics, Inc.]
• DIN‑GWDL and DIN‑GWDL‑SPLTR
• Patents [Crestron Electronics, Inc.]
• Open Source Software [Crestron Electronics, Inc.]
• Standard Terms & Conditions and Warranties [Crestron Electronics, Inc.]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>