OLIGHT Wiyvern Lumen Road and Commuter Bike Light User Manual
- June 9, 2024
- OLIGHT
Table of Contents
OLIGHT Wiyvern Lumen Road and Commuter Bike Light User Manual
WHAT IN THE BOX
Table 1 Bike light
COOL WHITE: CCT: 6000~6500K
Product parameters, see Table 1
All data are measured in accordance with ANSI/NEMA FL 1-2009. The test was conducted at a temperature of 25°C and a wind speed of 25 km/h.
BEFORE FIRST USE
The bike light arrives in lockout mode. Before first use, please unlock the light. While in lockout mode, press and hold the button for more than 3 seconds to turn the light on in low mode. Release the button to unlock the light.
The operating instructions are as follows
-
Change brightness, see Figure 4
-
Check battery level, see Figure 5
-
How to install, see Figure 6
DANGER
- Do not look directly at the light source or shine to eyes, or else it may cause temporary blindness or permanent damage to the eyes.
WARNING
- Don’t leave the light in a car where the inside temperature may be over 60℃, or in similar places.
- Before long-term storage, please fully charge the product.
- When the charging port is not in use, keep the dust cover normally closed to prevent dust or foreign objects from entering.
- Do not disassemble the product.
- Do not immerse the bike light in seawater or other corrosive media as it will damage the product.
- If the light is left unused, carried, or transported, please lock out the power button to prevent potential damage from the heat built-up due to accidental activation.
- When the power is lower than 20%, the light flashes quickly for 5 times as a reminder, and every 10 seconds for 3 consecutive times. The light will turn to LOW mode and cannot be adjusted, then it will automatically turn off after 30 minutes.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 2 years of purchase
Contact Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com Global Customer Support: contact@olightworld.com Visit www.olightworld.com to see our complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China. Made in China