GENESIS 2023 GV70 Electrified User Guide

GENESIS
ElEctrIfIEd GV70
QUICK REFERENCE GUIDE

2023 GV70 Electrified

GENESIS BRANDED VEHICLE OWNER PRIVACY POLICY
Your Genesis Branded Vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Genesis Branded
Vehicle has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect, use, and share this information.
You may read our Vehicle Owner Privacy Policy on the GenesisMotorsUSA.com website at https://www.genesis.com/us/en/privacy-policy.html
If you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact Customer Care at:
Genesis Customer Care
P.O. Box 20850
Fountain Valley, CA 92728
844-340-9741
CustomerCare@genesismotorsusa.com
Genesis Customer Care representatives are available Monday through Friday, between the hours of 5:00 AM and 7:00 PM PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST (English).
For Customer Care assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST.
WARNING!
To reduce the risk of serious injury to yourself and others, read and understand the important SAFETY
INFORMATION in your Owner’s Manual. Use this Quick Reference Guide to learn about the features that will enhance your enjoyment of your Genesis Branded Vehicle.
More detailed information about these features are available in your Owner’s Manual.

SMART KEY

Remote start using Smart Key (if equipped)
You can start the vehicle using the Remote Start button on the smart key.
To start the vehicle remotely:

1. Press the door lock button on the smart key within 32 feet (10m) from the vehicle.
2. Press the Remote Start button for more than 2 seconds within 4 seconds after pressing the door lock button.
3. The hazard warning lights will blink and the engine will start.
4. To turn off the remote start function, press the Remote Start button once.

Accessing mechanical key

1. Place a soft cloth over the groove A , and pry open the smart key cover.
2. Press the mechanical key and remove it from the smart key FOB.

DOOR LOCK

Operating Door Locks from Outside the Vehicle Mechanical Key

After pulling the door handle 1 , turn the key 2 toward the front of the vehicle to lock A or turn the key toward the rear of the vehicle to unlock B . If you lock the driver’s door with a mechanical key while the engine is running, turn the key 2 TWICE toward the front of the vehicle to lock A . If you lock/unlock the driver’s door with the mechanical key, only the driver’s door will lock/unlock automatically, not others. Once the doors are unlocked, they can be opened by pulling the door handle. When closing the door, push the door by hand. Make sure that doors are closed securely.

Driver’s door Lock / Unlock · To Unlock : Place your hand inside the door handle
· To Lock : Press the touch sensor on the outside of the handle to lock.
* CAUTION

• If you locked the door with the touch sensor on the door handle, the doors cannot be unlocked with the sensor within 3 seconds.
• If you unlocked the door with the touch sensor on the door handle, the doors cannot be locked with the sensor within 2 seconds.
  NOTE: User selectable option: Please see section 5 from your Owner’s Manual for more details.

FRONT SEAT ADJUSTMENT

Ergo-Motion seat (if equipped) 6 Ergo-Motion seat automatically adjust the driver seat during longdrives. After driving for an hour, the Smart Posture assist automatically adjusts the pelvis and back portion of the driver’s seat. Setting can be activated/ deactivated from the settings menu.

HEADREST ADJUSTMENT

Adjusting the height up and down To raise the head restraint:

1. Pull it up to the desired position 1 .

To lower the head restraint:

1. Push and hold the release button 2 on the head restraint support.
2. Lower the head restraint to the desired position 3 .

DRIVER POSITION MEMORY SYSTEM (if equipped)

NOTE: To reset the system, please refer to the Owner’s Manual.

To Store Settings

1. Shift to P (Park) while the Engine Start/Stop button is in the ON position.

2. Adjust the driver’s seat position, outer side view mirror position, steering wheel position.

3. Press the SET button. The system will beep once and notify you ‘Press button to save settings’ on the cluster LCD display.

4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will beep twice when the memory has been successfully stored.
   NOTE: Transmission must be in P (Park). To Recall
   Press the desired memory button (1 or 2). The system will beep once.

5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The message appears only for the driver’s seat position memory setting.

SEAT WARMER

Each time you push the button, the setting is changed as follows:

SEAT COOLER

Each time you push the button, the setting is changed as follows:

Rear Seat Cooler To turn off immediately, press and hold the button.

LIFTGATE OPERATION

Closing the liftgate
Lower the liftgate and press down until it locks. To be sure the liftgate is securely fastened, always check by trying to pull it up again.
NOTES: Liftgate opening height  adjustment is available in the Vehicle setup options. Please refer to yourOwner’s Manual for further information.
SMART LIFTGATE

Smart Liftgate
When smart key is within range for 3 seconds, the liftgate will automatically open.
To enable Smart Liftgate function: Vehicle must be in P (Park) to adjust the settings located in the setup menu in the AVN system screen.

1. Select Setup > Vehicle > Door/ Liftgate
2. Check “Smart Liftgate”.

NOTE: Function is active after 15 seconds when all doors are closed and locked. The vehicle will also provide an audible and visual alarm while activating. Smart Liftgate is Default OFF from Factory.
WIPERS AND WASHER

NOTE: To prevent damage to the hood and wiper arms, the wiper arms should only be lifted when in the top wiping position.
Front Windshield Washer Pull the lever gently toward you to spray washer fluid onto the windshield and to run the wipers1-3 cycles.
Push the lever away from you to spray rear washer fluid and to run the rear wipers 1-3 cycles.
Rear Windshield Washer The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Push the lever away from you to spray rear
washer fluid and to run the rear wipers 1~3 cycles.
Wiper Blade Removal

1. Within 20 seconds of turning off the engine, lift and hold the wiper lever up to MIST position for about 2 second until the wipers move to the top wipe position
2. At this position, you are able to lift the wipers off the windshield.
3. Gently put wipers back down onto windshield
4. Turn the wipers to any ON position to return to resting position

INSTRUMENT CLUSTER
Type A with 8″ LCD Display

1. Speedometer
2. Power/Charge gauge
3. Distance to empty
4. Warning indicator light
5. Cluster display
6. Battery SOC (State of Charge) gauge
7. Smart regeneration system

LCD DISPLAY VIEW MODES

Driver Assistance systems.
Turn By Turn (TBT)| | Turn By Turn view displays the state of the navigation.
Utility| | Utility view displays driving information such as the trip distance, fuel economy driver attention level and TPMS display.

LCD DISPLAY MODE CONTROL

Digital Speedometer

1. Scroll to ‘Select Contents’
2. Press and hold ‘OK’ button on Steering Wheel
3. Scroll Down and Select the Information they wish to display.

WARNINGS AND INDICATORS

HEAD-UP DISPLAY

NOTE: If you wear polarizing-filter sunglasses, it’s difficult to read the Head
Up Display information.The Head-Up display is a transparent display which projects an image of selected information of the instrument cluster and navigation onto the windshield glass.
To activate the head up display, select Head-Up Display in the Vehicle Settings menu on the infotainment screen. Adjust Head-Up Display height until in view.
CLIMATE CONTROL SYSTEM
Front seat control

1 Driver’s temperature control
2 Passenger’s temperature control
3 Fan speed control
4 Driver’s mode selection
5 Passenger’s mode selection
6 AUTO (automatic control)
7 OFF (system off)
8 Front windshield defroster| 9 Air intake control
10 SYNC
11 Rear window defroster
12 A/C (air conditioning)
13 Rear control
14 Driver’s seat only climate control
15 HEAT button
---|---

Rear seat control (if equipped)

1. Fan speed control
2. Temperature control
3. OFF (system off)
4. AUTO (automatic control)
5. Mode selection

SMART VENT
If cabin humidity increase while Climate Control is off, fresh air will be circulated into the cabin.
Please refer to the Owner’s Manual for further details.
AUTOMATIC HEATING / AIR CONDITIONING Automatically controls the modes, fan speeds, air intake and air-conditioning functions.

DEFOGGING / DEFROSTING

1. Press the front defrost button.
   NOTE: Outside (fresh) air position will be selected when front defrost button is selected.

2. Select warmest temperature.

3. Set the fan speed to the highest speed setting.

SYSTEM OFF
Pressing the OFF button will place the system in below settings.

• Front blower will turn off.
• Outside (fresh) air position will be selected.
• Vented air will be at last set temperature.

NOTE: To reduce window fogging and improve visibility, keep the interior surface of the windshield clean by wiping it with a clean cloth and glass cleaner. In addition, position the air intake control to circulate fresh air whenever possible while operating the vehicle.
MODE SELECTION
Touch the arrows on the climate control information screen to select air flow direction.

NOTE: Use a microfiber towel to prevent scratches on the climate controls while removing fingerprints, dust, or stains. Immediately wipe off any interior cleaning products to prevent damage to the climate controls.
AIR INTAKE CONTROL
Recirculation mode
When Recirculation mode is selected, air from the passenger compartment will be recirculated through the system and heated or cooled according to the function selected.
Fresh mode
When Fresh mode is selected, air enters the  vehicle from outside and is heated or cooledaccording to the function selected.

GENESIS CONNECTED SERVICES

Genesis Connected Services subscription is required. To enroll, please visit your dealership or MyGenesisUSA.com.
Press the button for access to the voice-response menu of services.
– You can say: Roadside Assistance
Service Link
Account Assistance
Press the button for SOS Emergency Assistance.
Visit MyGenesisUSA.com for more information or refer to your Genesis Connected Services User’s Manual for detailed information on system operation.
For immediate assistance with subscription services, please call 1-844-340-9741.

You can download the Genesis Intelligent Assistant App to your compatible smart phone from the following sites:

• iPhone ® — Apple  ® App Store
• Android ™  — Google Play ™NOTE: Image may not reflect most recent App configuration. Genesis Intelligent Assistant App

Remote Start
Remote Start enables you to remotely start your vehicle virtually from anywhere. For vehicles equipped with full-automatic temperature control, you can also enable climate control remotely and turn on the front window defroster, ensuring a warm or cool car is ready to go when you are.

• To use this feature, you must have a Genesis Connected Services Personal Identification Number (PIN).
  To create or change your PIN, log in to MyGenesisUSA.com.
  For more information refer to owner’s manual.
  Notice: Laws in some communities may restrict the use of the features that remotely start the engine. For example, some laws may require a person using the remote start feature to have the vehicle in view when doing so, or limit the length of time a vehicle engine may idle. Please check local and state regulations for any requirements and restrictions on remote starting of vehicles and engine idling time.

WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and / or death. Do not leave children or animals unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when parking the vehicle.

NAVIGATION

Map position

1. Move to the Home Screen
2. Map view mode
3. Map Scale Display
4. Navigation Volume
5. Menu
6. Stop route/Resume route
7. Estimated arrival time and remaining distance
8. Current location and destination name display
9. Vehicle position mark
10. Route display
11. TBT (Turn by Turn): turns the TBT function on/off
12. Route: changes the route conditions when a route is set

NOTE: Map view can be changed by selecting Map view mode button.
NOTE: Described functions may change in future updates to improve convenience. Please check for the latest S/W version regularly.

WIRELESS CELLULAR PHONE CHARGING SYSTEM

There is a wireless cellular phone charging system inside the front console. The system operates with all doors closed, and the ignition switch is in the ACC/ON position.
NOTE: The wireless cellular phone charging system supports only the Qi- enabled cellular phones ( ).
NOTE: Do not place any metallic items such as coins, keys on the charger. Avoid putting credit cards, etc. on the charger as they might get damaged by the magnetic field.
POWER OUTLET The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 180 watts with the engine running.
USB PORTS Plug in a USB cable or other media device to connect an external audio device and listen to it through the audio system in your vehicle.  The rear USB charger is designed to recharge batteries of small size electrical devices using a USB cable. The AC inverter supplies 110 volts (180 watts) electric power to operate electric accessories or equipment.
RADIO

1.  Moves to home screen or the previous screen.
2. Moves to home screen.
3. Menu – Displays pop-up menu of each mode
4. Band – Selects the desired radio band by pressing [FM], [AM] or [SiriusXM].
5. Voice Recognition – Moves to voice recognition screen.
6. Mode display – Shows the mode currently in play.
7. Frequency Dial – Touch or drag to tune to the desired station.
   Press to add current station to the preset.

AUDIO CONTROL

1. Users can set the volume level of each source (FM, AM, SXM, USB, BT and so on) individually by adjusting volume knob.
2. Then AVN (Headunit) will save the last volume levels of each source in the system sound settings.
3.  If users change the source, the volume will revert to the previously set volume for that source.

HOMELINK WIRELESS GARAGE CONTROL SYSTEM

1. Press and release 1 , 2 or 3 button.
   • If the indicator 7 is turned ON in Orange, go to Step 3 (programming mode)
   • If the indicator 7 is continuously turned ON or flashes in Gree rapidly several times, go to Step 2 (erasing mode)

2. Press and hold the button you wish to program for approximately
   15- 25 seconds until the LED flashes in Orange for several times.

3. Hold the Garage Door Opener Original Transmitter near the HomeLink Mirror.

4. Press the Original Transmitter button until the indicator 7 is turned continuously ON or flashes in Green for approximately 10 seconds and it indicates the programing is completed.

NOTE: If the indicator 7 flashes in Green continuously, but if the garage door opener does not operate, please continue to follow Rolling Code Programming steps below. Two Way Communication
Some new garage door openers come equipped with a two-way communication feature. If your garage door opener has this feature,  please also continue to follow the Rolling Code Programming steps below. For more information and programming tips on two-way communication please visit
www.homelink.com/compatible/twowaycommunication or call (800)-355-3515.

Indicator 4  & 6 :
Flashes in orange → “Closing” & “Opening”Solid Green → “Closed” & “Opened”
NOTE: If your garage door opener has Two-Way Communication functionality, it is possible for HomeLink to stop functioning the garage door shortly after initial programming, if the Two-Way Communication Programming wasn’t properly completed. If you experience this, completing the “Programming a New HomeLink Button” and “TwoWay Communication Programming” will restore door operation.
NOTICE: HomeLink®
operates while the ignition switch is in the ACC  or ON position for safety reasons. It is to prevent unintentional securityproblems from happening when the vehicle is parked outside the garage.
Rolling Code Programming

• You may need a ladder to access your garage door opener.
• You may need help from a second person.
• Be prepared some of the steps are time sensitive.

1. Firmly press and release the “Learn”, Smart”, or “ Program” button of garage door opener on the ceiling while the indicator 7 flashes in Green. Once the button is pressed, you have approximately 30 seconds to initiate the next step.
2. Return to the vehicle and firmly press the HomeLink button, hold for two seconds and release the button up to three times. Do not press the HomeLink button rapidly. At this point programming is complete and your device should operate. For more detailed information, please refer to your Owner’s manual or visit www.homelink.com or call 800-355-3515

http://www.homelink.com/

SHIFT BY WIRE (Electronic type shifter)

A Rotary shifter (Rotary gear shift dial), B Park button, C P Release Cap
To shift the gear to P (Park), press the P button while depressing the brake pedal.
To shift the gear to N (Neutral), rotate the shift dial clockwise from R (Reverse) or counterclockwise from D (Drive) while depressing the brake pedal.
To shift the gear to R (Rear), rotate the shift dial counterclockwise while depressing the brake pedal.
CHARGING DOOR
Opening the charging door

1. Depress the brake pedal and apply the parking brake.
2. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle.
3. Push the charging door where the tringle symbol 1 is located to open. The charging door opens only when the vehicle is unlocked.
4. Open the inlet cover 2 . i Information

If you cannot open the charging door due to freezing weather, tap lightly or remove any ice near the charging door. Do not try to forcibly open the charging door.

REGENERATIVE BRAKING WITH PADDLES

i Information
The paddle shifter does not operate when:

• The [ ] and [ ] paddle shifters are pulled at the same time.
• The vehicle is decelerating by depressing the brake pedal.
• Smart Cruise Control is activated.
• If the auto-hold button is depressed for 3 seconds, the brake disc cleaning function is operated. While operating to clean the brake disc, the driving distance and the regenerative braking performance can be  reduced. After finishing, the regenerative braking performance will be restored.

The paddle shifter is used to adjust the regenerative braking level from 0 to 3 during decelerating or braking.

• Left side ( ): Increases regenerative braking and deceleration.
• Right side ( ): Decreases regenerative braking and deceleration.
• Pull and hold the left side paddle shifter for more than 0.5 seconds and One pedal driving function is operated, increasing the regenerative braking. In this case, stopping the vehicle is possible by keep on pulling the paddle shifter.
• Pull and hold the right side paddle shifter for over 1 second to turn on and off the automatic change of the regenerative braking.
  Refer to the Owner’s Manual for information on ‘One pedal driving’ and ‘Smart recuperation system’

i-PEDAL

i-Pedal is controlled by acceleration pedal. i-Pedal provides vehicle speed control (acceleration/deceleration, stopping) without manually controlling the paddle shifter.
To operate:

• Pull the left side paddle shifter to level 3 regenerative braking system.
• The vehicle is stopped by pulling the left shift lever when the vehicle speed is less than 1 mph (3 km/h), the vehicle is stopped even if the left paddle shift lever is released.
• When you press the accelerator pedal at the same time during onepedal driving by pulling the left paddle shift lever, it cannot adjust the vehicle’s speed and stop position.
• I-Pedal indicator will illuminate in the instrument cluster.

ELECTRONIC STABILITY CONTROL (ESC)

The ESC system is an electronic system designed to help the driver maintain vehicle control under adverse conditions. Press to turn ESC on or off.
FORWARD COLLISION-AVOIDANCE ASSIST (FCA)

Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the roadway and warn the driver that a collision is imminent with a warning message, an audible warning  and apply emergency braking.
Active Assist: Forward Collision-Avoidance Assist will warn the driver with a warning message, an audible warning and steering wheel vibration depending on the collision risk levels. Braking assist or steering assist will be applied depending on the collision risk. Warning Only: Forward Collision-Avoidance Assist will warn the driver with a warning message, an audible warning and steering wheel vibration depending on the collision risk levels. Braking and steering will not be assisted. The driver must apply the brake pedal or steer the vehicle if necessary.
Off: Forward Collision- Avoidance Assist will turn off. The warning light will illuminate on the cluster.
DRIVE MODE
You can set the proper drive mode according to the road conditions or your driving habits.
The mode changes whenever the driver pushes the DRIVE MODE switch up or down.

DRIVE MODE
HIGHWAY DRIVING ASSIST (HDA) (if equipped)

Highway Driving Assist is designed to help detect vehicles and lanes ahead, and help maintain distance from the vehicle ahead, maintain the set speed, and help center the
vehicle between lanes while driving on the highway.
With the Engine Start/Stop button in the ON position, select or deselect ‘Driver Assistance → Driving Convenience’ from the setting menu to activate this setting.
NOTE: If the engine is turned off then on again, the system maintains the last setting.
Operation :

• Driving on the highway main road.
  – Vehicle speed is under 120 mph (200 km/h).

• Press the Driving Assist button on the steering wheel.
  – If entering the main road of highways while SCC and LFA is operating, HDA will be automatically activated.
  If HDA is operating, the indicator on the cluster will illuminate green.

LANE KEEPING ASSIST (LKA)

Lane Keeping Assist is designed to help detect lane markings (or road edges) while driving over a certain speed. Lane Keeping Assist will warn the driver if the vehicle leaves the lane without using the turn signal, or will automatically assist the driver’s steering to help prevent the vehicle from departing the lane.

• To turn LKA on, press and hold the Lane Driving Assist button
• To turn LKA off, press and hold the button again. A
  LKA operates only when the vehicle speed is above 40 mph and when the in the instrument cluster is green. LKA will not operate properly if the following conditions are present:
  – the lane line is not clear
  – on sharp bend in a road – heavy fog
  Refer to the Owner’s Manual for more detailed information. D N P
  NOTE: During operation, you may feel the sensation of steering wheel movement. Depending on the road condition(gradient), the deflection driving may occur.

LANE FOLLOWING ASSIST (LFA)

Quick Reference Guide I 24 Lane Following Assist is designed to help detect lane markings and/or vehicles on the road, and assists the driver’s steering to help keep the vehicle between lanes.
To activate LFA: With the engine on, shortly press the Lane Driving Assist button located on the steering wheel to turn on Lane Following Assist. The white or green indicator light will illuminate on the cluster. Press the button again to turn off.
BLIND-SPOT COLLISION-AVOIDANCE ASSIST (BCA)

Blind-Spot Collision-Avoidance Assist is designed to help detect and monitor approaching vehicles in the driver’s blind spot area and warn the driver of a possible collision with a warning message and audible warning. In addition, if there is a risk of collision when changing lanes or driving forward out of a parking space, Blind-Spot Collision-Avoidance Assist can help avoid a collision by applying the brake.
DRIVER ATTENTION WARNING (DAW)
Driver Attention Warning can help determine the driver’s attention level by analyzing driving pattern and driving time while vehicle is being driven. Driver Attention Warning will recommend a break when the driver’s attention level falls below a certain level.

• With the engine on, select or deselect ‘Driver Assistance → Driver Attention Warning’ from the Settings menu to set whether or not to use each function.
  Inattentive Driving Warning – If this is selected, Driver Attention Warning will inform the driver the driver’s attention level and will recommend taking a break when the level falls below a certain level.
  Leading Vehicle Departure Alert – If this is selected, the function will inform the driver when the front vehicle departs from a stop.

SMART CRUISE CONTROL (SCC)

Smart Cruise Control is designed to help detect the vehicle ahead and help maintain the desired speed and minimum distance between the vehicle ahead.
To turn on SCC:

1. Press the Driving Assist button to turn on SCC. The speed will be set to the current speed on the cluster.
2. If there is no vehicle in front of you, the set speed will be maintained, but if there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will accelerate.
   To set vehicle distance
   Each time the button is pressed, the vehicle to vehicle distance changes as follows:

Adjusting the vehicle speed

1. Push ‘+’ switch 1
   UP to increase cruising speed.

2. Push ‘-‘ switch 2
   DOWN to decrease cruising speed.
   NOTE: Quick push up/down will change speed by 1 mph. Holding witch up/down will change speed by 5 mph.

To Cancel Smart Cruise Control

To temporarily cancel SCC Press the switch or depress the brake

pedal to temporarily cancel SCC.

To turn off the SCC Press the Driving Assist button to turn SCC off.

REAR VIEW MONITOR

Rear View Monitor will show the area behind the vehicle to assist you when parking or backing up.
Shift the gear to R (Reverse), the rear view will appear on the screen, or press the Parking/View button while the gear is in P (Park), the rear view will appear on the screen.
NOTE: Rearview display is selectable, see Owner’s Manual for further details. The image displayed on the screen may become difficult to see under the following conditions:
– In the dark or at night.
– When it is raining, or when water droplets are on the camera.
– When the sun or the beam of headlights are shining into the camera lens.
Use care to keep the camera lens clean and avoid applying any type of solvents, car wax, or window cleaners to the camera lens. If the lens becomes dirty, wipe the lens with a  clean, soft cloth.
REMOTE START PARKING ASSIST (RSPA) (if equipped)
Remote Start Parking Assist uses vehicle sensors to help the driver park and exit parking spaces remotely from inside the vehicle by controlling steering wheel, vehicle speed, and gearshifts.

1. With the engine turned on, depress the brake pedal and shift the gear to D (Drive) or N (Neutral)
2.  Press and hold the Parking/View button to turn on

Follow the instructions on the infotainment screen.

FORWARD/REVERSE PARKING DISTANCE WARNING (PDW)

NOTE: Front Parking  Distance Warning will not warn if button indicator light off.
Forward/Reverse Parking Distance Warning can help warn the driver if an obstacle is detected within a certain distance when the vehicle is moving forward or in reverse at low speeds. Press the Parking Safety ( ) button
to turn on Forward/Reverse Parking Distance Warning. Press the button again to turn off the function. When Forward/Reverse Parking Distance Warning is off (button
indicator light off), if you shift the gear to R (Reverse), Forward/Reverse Parking Distance Warning will automatically turn on.
Parking Distance Warning does not operate when the vehicle’s forward speed is above 6 mph (10 km/h).
WARNING TIMING AND VOLUME
Setting Warning Timing:The initial warning activation time can be adjusted in the settings menu:Setup -> Vehicle -> Driver Assistance -> Warning Timing -> Standard or Late  Setting Warning Volume:The warning volume of alerts can be customized by the driver by going to the settings menu:Setup -> Vehicle -> Driver Assistance -> Warning Volume -> High, Medium, Low, or Off
TIRE PRESSURE MONITORING SYSTEM (TPMS)

Low Tire Pressure Indicator /  Low Tire Pressure Position Telltale and Tire Pressure Telltale ( Shown on the LCDdisplay )
TPMS Malfunction Indicator NOTE: Vehicle must be driven for accurate tire pressure reading.
LOW TIRE PRESSURE INDICATOR
Illuminates if one or more of your tires are significantly under-inflated.
TPMS MALFUNCTION INDICATOR
Blinks for approximately one minute, then remains illuminated when there is a malfunction with the TPMS. Inspect all tires and adjust tire pressure to specification. If the lamp remains illuminated, have the system checked by an authorized retailer of Genesis Brand Products as soon as possible.
LOW TIRE PRESSURE POSITION INDICATOR AND TIRE PRESSURE INDICATOR (LCD DISPLAY) To access the TPMS menu within the LCD display, press the Assist mode button on the steering wheel to display tire pressure.
Tire pressures will display after driving a short distance. If a tire pressure drops lower than predetermined specification, the Low Tire Pressure Indicator will illuminate and the LCD display will indicate tire(s) requiring air.
BRAKE DISC CLEANING
Press and hold the AUTO HOLD button for over 3 seconds. – Brake Disc Cleaning starts operating when the message ‘Brake disc cleaning’ is displayed on the instrument cluster.
– Regenerative braking is restrained while the brake is depressed about 10 times while driving.
– Brake Disc Cleaning function will turn off automatically when the operation is completed.
AUTO HOLD

The Auto Hold feature assists in steep hill areas. It holds the brake until the accelerator pedal is pressed.

1. Press the AUTO HOLD switch.
2. Stop the vehicle by pressing the brake pedal. The brakes will remain engaged even if the brake pedal is released.
3. The brakes will release when the accelerator pedal is pressed with transmission in D, R or manual mode.

To cancel the AUTO HOLD operation, press the AUTO HOLD switch again.

FINGERPRINT AUTHENTICATION SYSTEM (if equipped)
Fingerprint authentication system allows the driver to start the engine, have access to personal information, unlock profile and exit valet mode with a enrolled fingerprint.

Fingerprint Authentication
System Settings
To use the system, the driver’s fingerprint should be enrolled in the driver’s profile. The drivers can set or delete their fingerprint through the infotainment system. Follow
the following procedure.

1. Turn on the vehicle with a smart key. (Both Smartkeys must be present to save a fingerprint).
2. Select ‘Setup > User Profile Settings > Driver 1 > Fingerprint identification > Set/Delete Fingerprint > Set’ in the infotainment system screen.
3. Place your finger that you wish to enroll on the fingerprint sensor.
4. Following the instructions, place several parts of your fingerprint until the scanning process is complete.
5. Once the scanning process is completed, the message ‘Saving fingerprint….’ appears and the fingerprint enrollment process is proceeded.
6. When the fingerprint enrollment process is completed in the vehicle, the status is displayed on the infotainment system.

DIGITAL KEY PAIRING (if equipped)

Genesis Digital Key allows drivers to start the engine of their car using a smartphone app and Near-Field Communication (NFC). Genesis Digital Key provides many of the
same functions as your physical key. To pair your smartphone, complete the following steps:

1. Login to the Genesis Digital Key Application using your MyGenesis username and password

2. Start the vehicle with the proximity key

3. Pair the phone to the vehicle as follows:
   • Navigation Vehicles: Settings -> Vehicle -> Digital Key -> Smartphone Key -> Save
   • Display Audio: Instrument Cluster User Settings Mode -> Digital Key -> Smartphone Key -> Save

4. Open the Genesis Digital Key Application on the primary user’s smartphone. Select the + Icon on the main screen of the smartphone app.

5. Place the smartphone on the Wireless Phone Charger in the vehicle and the process will begin automatically

6. Once the screen in the vehicle says saved, your Digital Key is ready to use.
   If the NFC card is lost or stolen, please contact your local Genesis dealer for replacement. NOTE: This application is only available for Android users.

NEAR FIELD COMMUNICATION (NFC)

To lock/unlock your vehicle using the NFC key card, hold the key card up to the center of the door handle A .
If you try to lock your vehicle with the NFC card under the following conditions, it will not work:

• The Smart Key is in the vehicle.
• The POWER button is in ACC or ON position.
• Any of the doors, hood and trunk are open.

NOTE: If you overlap and use the key card with other NFC-enabled cards such as a transportation card or credit card, it will not work.
*For security reasons, the vehicle can only have one NFC key card paired to it at one time.  Any time that a new Key card is paired to the car it will disable the previously paired Key Card .
Program Coverage Summary

Genesis Service or 36,000 miles, Valet is included whichever comes for the first 3 first, of ownership. years

Complimentary
Services| Service Valet| Complimentary
Loaner Vehicle| Maintenance
Original Owner or
Lessee| Yes| Yes| Yes
Subsequent Owner or
Lessee| Warranty
Onl| Warranty
Onl| No

See below for program terms and conditions.
SERVICE VALET
Service Valet is available while your vehicle is receiving complimentary maintenance, wear items, or warranty repairs by an authorized Genesis retailer. Simply contact your authorized Genesis retailer’s Service Advisor or contact the Customer Care Center at 844-340-9741 to make your appointment. The retailer  will work with you to arrange your pickup and delivery time and location.

• Valet appointments must be made at least 2 business days in advance.

• Valet area of coverage is valid only within an estimated 1 hour drive time distance (based on traffic, weather, and road conditions) from the participating retailer location to the pickup/delivery location.

• Valet pickup and delivery must occur during normal business hours.
  After-hours pickup and delivery are at the discretion of your participating retailer.

• You must notify your Genesis Service Experience Manager 1 business day in advance if location or time of valet services changes. If a change or cancellation is not made at least 1 business day in advance, you may be charged a fee, or Service Valet may be cancelled.

• You will be charged a fee if you elect to extend the use of the courtesy replacement vehicle or delay the delivery of your vehicle.

• Prior to or at the time of your vehicle pickup, you will need to provide your valet with the following information if a courtesy replacement vehicle is needed:

• Insurance company name, policy number, and expiration date

• Driver’s license number, state, expiration, and date of birth

• Credit card number and expiration date (standard requirement for rental car use)

• The above information for any additional drivers
  Genesis brand vehicle owner must provide the valet with the Genesis brand vehicle that is currently registered in compliance with local and state laws. Road tolls incurred during the Service Valet may be charged to the vehicle owner.

COMPLIMENTARY LOANER VEHICLE
We come to you and provide you with alternative transportation. While your vehicle is being serviced under this program, qualified drivers will be provided a courtesy replacement Genesis brand vehicle at no additional cost. You must be at least 25 years of age (in most states) with a valid driver’s license to drive a loaner vehicle.
Please provide your Service Advocate with the following information:

• Insurance company name, policy number, and expiration date
• Driver’s license number, state, expiration and birth date
• Credit card number and expiration date (standard requirement for rental car use)
• The above information for any additional drivers

COMPLIMENTARY MAINTENANCE COVERAGE
Vehicle Eligibility
For original retail owners of the Genesis vehicle, all normal factory- recommended scheduled maintenance is covered for the first 3 years or 36,000 miles, whichever comes first. The Service Valet Program is applicable to all Genesis specified model vehicles purchased in the United States from authorized Genesis retailers for the first 3 years or 36,000 miles. The program is not in effect outside of the United States.

• Vehicle coverage begins on the date of first retail sale. Fleet vehicles are excluded from this program.
• If the vehicle becomes damaged (such as by accident, fire, act of nature, etc.) and is subsequently titled salvaged, flooded, or reconstructed, it is no longer eligible for the benefits of the Genesis Electrified GV70 complimentary maintenance Program.
  Guidelines for Scheduling Maintenance
  The Service Valet Program covers factory-recommended scheduled maintenance for the first 3 years or 36,000 miles, whichever comes first. Covered maintenance costs include all labor and parts necessary to complete the factory recommended service. Having your vehicle serviced at the specified time/mile intervals is critical in maintaining long-term durability. Failure to have your vehicle serviced at the specified interval may invalidate the warranty under certain circumstances. If for any reason a service is missed, the authorized Genesis retailer will perform the next or missed major service.
  Some owners may wish to have their oil changed more frequently and follow severe factory recommended service intervals. The customer must pay for any additional
  services performed on the vehicle. Service procedures not specifically referenced in the Genesis Customer Care Quick Reference Guide must be preauthorized by a
  Genesis Aftersales Market Manager or a Market Manager.

Exclusions from Coverage
The following items, without limitations, are not covered :

•  State inspections

• Wear and tear of soft trim, including seats, carpets, door casings, wood veneer, headliner, and all chrome trim

• Severe maintenance performed at recommended service intervals

• Wear and tear or damage to exterior body panels, trim, and glass

• Damage due to poor fuel quality, misuse, abuse, neglect, fire, accident, flood, or installation of unapproved parts and accessories

• Vehicles used in competitive events

• Vehicles with an unreadable/tampered VIN, or where true mileage cannot be determined

• Repairs and maintenance not performed at an Authorized retailer of Genesis.

• Repairs covered under the New Vehicle Limited Warranty

• Required maintenance and covered wear parts replacement on United States specification vehicles operating outside the United States
  Transfer of Coverage
  The described coverage only applies to the original retail purchaser or original lessee of a Genesis Brand vehicle. The coverage is not transferable to subsequent owners, with the exception of immediate family members. Immediate family members include the following:

• Spouses or registered domestic partners

• Parents

• Children or stepchildren

Dealerships will verify that the owner/customer is the original owner/lessee. Certain limitations and exclusions apply to this program. Please refer to your
New Vehicle Limited Warranty guide for warranty details.

MAINTENANCE

Frequently
Replace 16,000 or 24 mos.| Replace More Frequently
Coolant| “at first, 120,000 or 120 mos. Inspect 24,000 or 24 mos.”| Inspect Same As Normal
12V Auxiliary Battery Condition| Inspect 8,000 or 12 mos.| Inspect Same As Normal
Brake Lines, Hoses and Connections| Inspect 8,000 or 12 mos.| Inspect More Frequently
Disc brakes and pads, calipers and rotors| Inspect 8,000 or 12 mos.| Inspect More Frequently
Steering gear rack, linkage and boots / lower arm ball joint, upper arm ball joint| Inspect 8,000 or 12 mos.| Inspect More Frequently
Drive Shaft and Boots| Inspect 16,000 or 24 mos.| Inspect More Frequently
Air Conditioning Compressor, Air Conditioner Refrigerant and Performance| Inspect 8,000 or 12 mos.| Inspect Same As Normal
Reduction Gear Fluid| Inspect 32,000 or 48 mos.| Replace 80,000
Brake Pedal| Inspect 8,000 or 12 mos.| Inspect Same As Normal
Brake fluid
)| Inspect 8,000 or 12 mos.| Inspect Same As Normal
Replace 48,000 or 48 mos.| Replace Same As Normal

See Owner’s Manual for details.
Fuel filter is considered to be maintenance free but the quality of fuel used may impact the frequency of maintenance needed. If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting problem, etc. replace the fuel filter immediately regardless of maintenance schedule and consult an authorizedretailer  of Genesis Branded products for details.

Roadside Assistance: 1-844-340-9742
SiriusXM ®
Radio: 1-800-967-2346
Genesis Customer Care & Connected Services:
1-844-340-9741 www.MyGenesis.com
NP150-9T2023
(Rev 01/24/23)
Printing 01/24/23

References

• Luxury Cars, Sedans, SUVs & Electric Vehicles || Genesis USA
• Genesis Owners Homepage | MyGenesis
• Homelink
• Genesis Owners Homepage | MyGenesis
• Genesis USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>