AIRNASA HLBULB-002 Electric Wax Melt Warmer User Manual

Electric Wax Melt Warmer
With Timer & Handle
User Manual

Preface

Thank you for choosing the electric wax melt warmer with timer (Model HLBULB-002). This product has been designed to provide a warm and inviting atmosphere with the help of scented wax and fragrant oils.
This product manual is intended to help you understand and use the electric wax melt warmer with timer easily and safely. Please read this manual carefully before operating the unit, and keep it for future reference. If you have any questions or concerns about  the product, please feel free to contact our customer service team.

Safety Precautions

• Keep out of reach of children and pets.
• Avoid direct contact with the hot surface of the lamp body during use, as it may cause burns.
• Do not immerse this product in water or other liquids. The electrical parts can be damaged, causing fire or electrical shock.
• Unplug when not in use or replacing the bulb.
• Do not use any other type of bulb except the 40W bulb provided with the product.
• Make sure the power source voltage matches the voltage specified on the product label before use.
• Only use the product in an environment with good ventilation.
• Do not block the airflow from the product during use, which may cause short circuit or fire hazard.
• Do not add flammable and explosive substances to this product.

By following these safety precautions, you can ensure a safe and enjoyable experience while using the electric wax melt warmer with timer. Failure to follow these warnings may result in damage to the product, injury to the user, or fire. If you have any concerns or questions regarding the safe use of this product, please contact our .
customer service team.

Product Specification

Wax melt warmer Specification

• Model: HLBULB-002
• Size: DIA11 cm H24 cm / DIA4.3in H9.5in
• Weight: 850g / 1.87lb
• Material: Metal+Glass
• Voltage: 110V – 60Hz
• Power Cord Length: 150cm
• Timer: 2/4/8 Hours

Bulb Specification

• Bulb Wattage: 40W
• Base Type: E12
• Shape Type: Antique Edison Style
• Color Temperature:2700k
• Luminous Intensity:120Lm

Packing Include

• 1 ×Product (with timer & handle)
• 1 × Warmer Dish
• 1 × 40W lamp bulb
• 1 × Glass Lampshade
• 1 × User Manual
• 1 × Box

Product Details

This 40W electric wax melt warmer is suitable for block wax and essential oil. In order to get a better experience, please strictly follow the following steps of use.

Use for Scented Wax Melts

1. To achieve optimal results, place 3-4 scented wax melts in the dish of the warmer. You can add a wax cubes of different fragrance according to your fragrance needs.
2. Before use, turn off the switch on the warmer. Insert the power cord plug into a socket and turn the switch on.
3. Do not add water when using the wax melt: It will affect the melting effect of the wax melt cubes.
4.  As the wax melts, fragrance is released gradually.
5. Once the wax block begins to melt, please refrain from touching the melt or warmer dish directly with your hands.

Use for Fragrance Oil

1. Due to the strong volatility of aromatic essential oils. When using essential oils, you need to mix with water. You can add appropriate aromatic essential oils according to the needs of aroma.
2. When adding water, avoid the main part of water inflow to ensure safety.
3. Make sure that the switch on the thermometer is closed before use. Then insert the power cord plug into the socket and open it.
4. Pay attention to prevent dryness when using essential oils, and pay attention to the reduction of water.
5. Due to high temperature, do not directly contact the spice oil when heating.
6. After use, clean and heating discs need to be cleaned with dry rags.

How to Use Timer

1. Press the switch once: On ( indicator light on )
2. Press the switch twice: 2 hours timing setting ( indicator light of 2H is on )
3.  Press the switch three times: 4 hours timing setting ( indicator light of 4H is on )
4. Press the switch four times: 8 hours timing setting ( indicator light of 8H is on )
5. Press the switch five times: OFF ( indicator light off )

• Tip: In any time mode, long press the switch for 30 seconds to turn off.

Cleaning and Maintenance

1.  Always unplug the power cord before cleaning the warmer.
2. Melts do not consume in the low temperature warmer. Therefore, you need to take out the melt before using a new wax melt.
3. To remove used wax, please wait for the wax melt in the removable warmer dish cool to room temperature, then place the removable warmer dish in the freezer for about 30 minutes to shrink the wax.
4. Remove the warmer dish from the freezer. Tip the dish to allow the wax to drop out. Repeat as necessary.
5. If there is some stubborn wax, it can be washed with hot water. Then gently wipe the wax residue with a dry paper towel. Do not pry out the wax with sharp tools to avoid damaging the warmer dish.
6. Before using the new wax melt, please keep the warmer dish dry at normal temperature.
7. If it is not used for a long time, be sure to unplug the power cord.
   Use a soft dry cloth to clean the heater and store it in a non-high temperature and strong magnetic environment.

Maintenance Service Guarantee

Guarantee ordinance

1. Please keep this user manual properly so that you can get operation instructions in use.
2. The warranty start date of this product is the delivery date of the product system. Our company provides a warranty period of “12 months” from the delivery date of the system.
3. This product has passed strict quality inspection. According to the warranty instructions, our company will be responsible for free repair and replacement of any hardware failure caused by the quality problem of the product under normal use and within the warranty period.
4. The repaired products will continue to enjoy warranty service during the warranty period. If the remaining warranty period is less than 3 months, the replaced parts will enjoy a “3 month” warranty from the date of replacement.
5. When the product fails, please contact the after-sales support team of our Amazon store directly.

Non-Guarantee ordinance

1. Due to incorrect installation and operation (such as short circuit caused by wet hand pulling plug).
2. Failures and damages (such as high temperature, strong magnetic and other environments) caused by using in the working environment not specified by the product.
3. Damage caused by accident and abuse (including heating non-standard articles).
4. Damage caused by improper storage (such as liquid immersion in parts, etc.).
5. Damage caused by unauthorized removal or modification of parts.
6. Violate the principle of fact and forge vouchers.

MADE IN P.R.C

Documents / Resources

| AIRNASA HLBULB-002 Electric Wax Melt Warmer [pdf] User Manual
HLBULB-002, HLBULB-002 Electric Wax Melt Warmer, Electric Wax Melt Warmer, Wax Melt Warmer, Melt Warmer, Warmer
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>