Genesis GLVC08B 8V Compact Vacuum/Inflator Instruction Manual

: October 27, 2023
: Genesis

Table of Contents

Genesis GLVC08B 8V Compact Vacuum/Inflator
SPECIFICATIONS
GENERAL SAFETY RULES
ELECTRICAL SAFETY
PERSONAL SAFETY
TOOL USE AND CARE
BATTERY TOOL USE AND CARE
SERVICE
EXTENSION CORDS
KNOWING YOUR VACUUM/INFLATOR
UNPACKING AND CONTENTS
CONTENTS IN PACKAGE
OPERATION
MAINTENANCE
TWO-YEAR WARRANTY
TOLL-FREE HELPLINE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Genesis GLVC08B 8V Compact Vacuum/Inflator

Genesis-GLVC08B-8V-Compact-Vacuum-Inflator-product

SPECIFICATIONS

Model………………………………. GLVC08B
Input Power………………………. 8V DC
Suction…………………………….. 4200 Pa (Turbo) / 3800 Pa (Regular)
Collection Capacity…………….. 160 ml
Noise Level……………………….. <72dB
Battery……………………………… 8V, Lithium-Ion, 2000 mAh
No-Load Run Time …………….. 16 Min (Regular) / 12 Min (Turbo)
Charger…………………………….. 120V~/60Hz, ETL Listed
Charging Time…………………… 3-5 Hours
Net Weight………………………… 1.18 lb

Includes: Battery Pack, Charging Adaptor, Crevice Tool with Brush, Inflator Nozzle, and Storage Bag for Accessories Warning: To reduce the risk of injury, user must read and understand this operator’s manual before operating this tool. Save this Manual for future reference.

Toll-Free Help Line: 1-888-552-8665

WARNING: The Operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

GENERAL SAFETY RULES

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints.
Crystalline silica from bricks and cement and other masonry products.
Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

WARNING: Read and understand all warnings, cautions and operating instructions before using this equipment. Failure to follow all instructions listed below may result in electric shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS WORK AREA SAFETY

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an extension cord suitable for outdoor use. These cords are rated for outdoor use and reduce the risk of electric shock.
Do not use AC only rated tools with a DC power supply. While the tool may appear to work. The electrical components of the AC rated tool are likely to fail and rate a hazard to the operator.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from the moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents may cover moving parts and should be avoided.
Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying a power tool with your finger on the switch or plugging in power tools that have the switch on invites accidents.
Remove any adjusting keys or wrenches before turning the power tool on. A wrench or key that is left attached to a rotating part of the tool may result in personal injury.
Do not overreach. Maintain proper footing and balance at all times. Loss of balance can cause an injury in an unexpected situation.
Do not use a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.
Keep tool handles dry, clean and free from oil and grease. Slippery handles cannot safely control the tool.

TOOL USE AND CARE

Secure the workpiece. use clamp or other practical way to hold the workpiece to a stable platform. Holding the workpiece by hand or against your body is unstable and may lead to loss of control.
Do not force the power tool. The tool will perform the job better and safer at the feed rate for which it is designed. forcing the tool could possibly damage the tool and may result in personal injury.
Use the correct power tool for the job. Don’t force the tool or attachment to do a job for which it is not designed.
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired or replaced by an authorized service center.
Turn the power tool off, and disconnect the plug from the power source and/or battery pack from the power tool before making any adjustments, changing the accessories, or storing the tools. Such preventive safety measures reduce the risk of an accidental start up which may cause personal injury.
Store idle tool out of reach of children and other inexperienced persons. It is dangerous in the hand of untrained users.
Maintain power tools with care. Check for proper alignment and binding of moving parts, component breaks, and any other conditions that may affect the tool’s operation. A guard or any other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.
Use recommended accessories. using accessories and attachments not recommended by the manufacturer or intended for use on this type tool may cause damage to the tool or result in personal injury to the user. Consult the operator’s manual for recommended accessories.
Never leave the tool running unattended, turn the power off. Do not leave the tool until it comes to a complete stop.

BATTERY TOOL USE AND CARE

Ensure the switch trigger is in the off position before inserting battery pack. Inserting the battery pack into a power tool that have the switch on invites accidents.
Recharge only with the charger speciﬁed by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use battery tools only with speciﬁed battery packs. use of any other battery packs may create a risk of injury and fire.
Avoid storing the battery pack in a container with other metal objects such as nails, coins, clips, keys, screws, or other small metal objects that can make a connection from one terminal to another. Always protect the battery terminals when battery pack is not being used. Connecting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery. Avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Battery tools do not need to be plugged into an electrical outlet, therefore, they are always in operation condition. Be aware of possible hazards when not using your battery tool or when changing accessories. following this rule will reduce the risk of electric shock, fire or personal injury.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Service your power tool periodically. When cleaning a tool, be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched.

WARNING: READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS

EXTENSION CORDS

Grounded tools require a three wire extension cord. Double-insulated tools can use
either a two or three wire extension cord. As the distance from the power supply outlet increases, you must use a heavier gauge extension cord. using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. Refer to the table shown below to determine the required minimum wire size.
The smaller the gauge number of the wire, the greater the capacity of the cord. for example: a 14-gauge cord can carry a higher current than a 16-gauge cord. When using more than one extension cord to make up the total length, be sure each cord contains at least the minimum wire size required. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum wire size.

Guidelines for Using Extension Cords

If you are using an extension cord outdoors, be sure it is marked with the suffix “W-A” (“W” in Canada) to indicate that it is acceptable for outdoor use.
Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

SPECIFIC SAFETY RULES FOR CORDLESS VACUUMS AND/ OR INFLATORS

WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH THE PRODUCT (GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!

Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electric outlet.
Empty the container often to prevent overheating.
Clean ﬁlter and pre-screen when container is emptied to prevent overheating and provide maximum airﬂow.
Wear eye protection. Always use safety glasses with side shields. use only certified eye protection equipment marked to comply with ANSI z87.1 standards.
Use the vacuum to only pick up dry materials, do not pick up liquids or wet material.
Only inﬂate objects in which the nozzle properly ﬁts.
Do not over inﬂate objects to avoid bursting.
Never leave the vacuum/inﬂator unattended while it is in the on position.
Do not place battery tools near ﬁre or heat. This will reduce the risk of explosion and possibly personal injury.

WARNING: Dry material pick up only. DO NOT pick up wet material or liquids.

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY

Save these Instructions. This manual contains important safety and operating instructions for your battery charger.
Before using the battery charger, read all instructions and cautionary markings on (1) Battery Charger, (2) Battery, and (3) Product using battery.
Use only the charger which accompanied your product or direct replacements as listed in this manual. Do not substitute any other charger.
Do not recharge the battery in damp or wet environments. Do not expose the battery pack to water or rain.
Do not operate the charger with damaged cord or plug. Replace immediately.
Do not operate a charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Take it to a qualified serviceman.
Do not disassemble a charger or a battery pack. Take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
Do not charge the battery pack when temperature is below 50 degrees f (10 degrees C) or above 104 degrees f (40 degrees C). Store the tool and battery pack in a location where temperature will not exceed 122 degrees f (50 degree C). This is important to prevent serious damage to the battery cells.
Place the charger on flat non-flammable surface and away from flammable materials when re-charging the battery pack.
To reduce risk of electric shock, unplug the charger from outlet before attempting any maintenance or cleaning.
If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, wash them out with clear water for at least 10 minutes, and then seek medical attention right away.
Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.
Do not short the battery pack. Do not touch the terminal with any conductive material. Avoid storing battery pack in a container with other metal objects such as nails, coins, etc. Always protect the battery terminals when battery pack is not used.
Do not charge a battery pack inside a box or container of any kind. The battery must be placed in a well ventilated area during charging.
Do not allow anything to cover or clog the charger vents.
Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire.
Disconnect the charger from the power source when not in use. This will reduce the risk to electric shock or damage to the charger if metal pieces should fall into the opening. It also will help prevent damage to the charger during a power surge.

WARNING: A battery short can cause a large current ﬂow, overheating, possible burns and even a breakdown.

IMPORTANT BATTERY INFORMATION: DISPOSING OF THE BATTERY

Your batteries are LITHIuM-ION rechargeable batteries. Certain Local, State and federal laws prohibit disposal of these batteries in ordinary trash.
Consult your local waste authorities for your disposal/recycling options.
More information regarding battery disposal in u.S. and Canada is available at; http://www.rbrc.org/index.html, or by calling 1-800-822-8837 (1-800-8BATTERY).

KNOWING YOUR VACUUM/INFLATOR

Genesis-GLVC08B-8V-Compact-Vacuum-Inflator-fig-2

On/Off Switch (Regular)
Max Switch (Turbo)
Collection Cup w/ filters
Vacuum Cap
Battery Power Indicator
Charger
Battery
Crevice Tool w/ Dust Brush
Inflator Nozzle
Storage Bag

UNPACKING AND CONTENTS

IMPORTANT: Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you do anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

CONTENTS IN PACKAGE

Genesis-GLVC08B-8V-Compact-Vacuum-Inflator-
fig-3

OPERATION

WARNING: To reduce the risk of serious personal injuries, read and follow all important safety warning and instructions before using this tool.
WARNING: Always be sure that the tool is switched off before insertion or removal of the battery pack.

INSTALLING OR REMOVING THE BATTERY PACK (FIG 2)

To install the battery pack, insert the battery pack (7) from the bottom of the tool all the way into the battery port (12) until it locks in place with a click, as shown in fIG 2.
To remove the battery pack, slide the battery locking tab (11) to the left to release the battery pack, then pull the battery pack out.

CHARGING THE BATTERY (FIG 2)

NOTE: Always Check that the power supply corresponds to the voltage on the ratings plate.

Insert the battery into the vacuum.
Connect the charging adaptor (6-fig 1) to the charging port (13).
Plug the adaptor into a 120 Volt AC power source. One of the GREEN indicator lights (5-fig 1) will flash indicating the level of charge.
When all three indicator lights are solid, the battery has finished charging.
To remove the battery from the vacuum, slide the battery locking tab (11) to release the battery pack.
The battery may become warm while charging. This is normal.
If the battery is hot after continuous use in the tool, allow it to cool down to room temperature before charging. This will extend the life of your batteries.

NOTE: It takes approximately 3-5 hours to charge up a completely discharged battery.

USING THE VACUUM

Insert the battery pack. Turn on the vacuum by pressing the ON/Off switch (1-fig 1).
If more power is desired, press and hold the MAX/Turbo switch (2-fig 1).
The standard nozzle should be used for most vacuuming applications.
To get into tighter areas such as between car seats, insert the crevice tool with brush (8-fig 1) into the end of the standard nozzle.
for smaller and more difficult to clean materials, use the dust brush to move the material as you clean.

NOTE: To ensure proper suction and prevent overheating, empty collection cup frequently.

WARNING: Dry material pick up only. DO NOT pick up wet material or liquids.

USING THE INFLATOR

Remove the vacuum cap and collection cup with filters.
Insert the inflator nozzle (9-fig 1) into the air outflow port (14-fig 2).
Make sure the object to be inflated has the proper size valve to fit the nozzle.
Insert the nozzle into the valve of the object to be inflated, make sure the valve seals to prevent air escaping.
Select Standard or Turbo mode, and inflate to desired pressure.
When finished inflating, remove the inflator nozzle from the object, and close the valve.
WARNING: To prevent bursting, do not over-inﬂate objects.

HOW TO DEFLATE

Keep the collection cup in place, attach the inflator nozzle to the collection cup.
Insert the inflator nozzle into the valve of the object to be deflated.
Turn on vaccum, air will slowly be removed from the object.

MAINTENANCE

CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING: Do not at any time let brake ﬂuids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommended using this tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air.

HOW TO REMOVE AND EMPTY THE COLLECTION CUP

follow indicators on the side of the vacuum, twist the collection cup (3) with filters counter-clockwise to remove.
With the collection cup removed, grab the bar in the center of the end cap (16), pull the filter assembly out.
The debris in the collection cup can be disposed of as needed.

NOTE: Clean the collection cup frequently for best performance.

HOW TO REMOVE AND CLEAN FILTERS

Remove the collection cup and filters as noted above.
Twist the bar of the end cap (16) clockwise to remove it from the pre-filter.
The filter assembly can now be seperated into 3 parts, pre-filter (17), HEPA filter (15) and end cap (16).
To clean the pre-filter and HEPA filter, lightly tap each against a solid object.
If the filters require stronger cleaning, a light pressure air source can be used or they may be washed with warm water and dish soap.
NOTE: If washed, allow the HEPA filter to dry for 24 hours before replacing in vacuum
follow the removal steps in reverse to reinsert the filter and collection cup.

LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.

TWO-YEAR WARRANTY

This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call Toll-free Help Line for possible solutions. THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY. BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.

TOLL-FREE HELPLINE

for questions about this or any other GENESIS Product, please call Toll-free: 888-552-8665. Or visit our web site: www.genesispowertools.com

Â©Richpower Industries, Inc. All Rights Reserved
Richpower Industries, Inc.
36 Hampton Road
Williamston, SC 29697
Richpower Industries, Inc. 736 Hampton Road Williamston, SC USA www.richpowerinc.com