tekkiwear RU-638 2 in 1 Beauty Instrument Instructions

June 9, 2024
TeKKiWear

2 IN 1 BEAUTY INSTRUMENT
RU-638″
Instrument Instructions

Brief Introduction

Ru-638 beauty instrument have Ultrasonic and Spot removed functions. It is easy and simple to handle, portable design.
Ultrasonic:

  1. By the high frequency vibration (1MHz -3MHz), generate ultrasonic with strong penetrability. It is a special instrument that could radiate an alternate wave and spread around. It is much stronger that the normal sonic wave, with high frequency, good directivity, strong penetrability and great expandability.
  2. Because of the high frequency vibration, it will do soft and micro massage to the skin cells, accelerate the blood circulation, facilitate the metabolism, activated the cells and improved the absorption of nutrition.

Usage

  1. Before using this function, clean the skin where would be treated by cleanser.
  2. After cleaning the skin, choose a proper coolant according to the skin condition and disease to achieve the best effect.
  3. Connect the power and switch on. Press the Power button, adjust the working time with A/V buttons under the TIME display frame and the working intensity with ♦/V buttons. Press the WAVE button to select pulse wave or continuous wave.
  4. Select the proper probe according to the treating part, small part use the smaller one, large part use the bigger one. Adjust the working time and press the START button to work.
  5. While operating, the beautician should hold the probe steadily, rotate slowly and evenly, let the skin have a sufficient ultrasonic treatment.
  6. Take the probe away after finishing the treatment, keep the essence on the skin and let it penetrate thoroughly.

Attentions:

  1. Patient with angiocardiopathy, hemorrhagic disease, wounds and the pregnant woman could not take this treatment.
  2. Keep the probes cleans and dry. Do not wash by water, disinfect and clean with cotton, do not drop or hit the probes.
  3. Do not let the probes work without any operation, or the machine may get broken.
  4. Do not use around the eyeball.
  5. Person with hypohepatia, cirrhosis and kidney problem could not use this machine.

Spot removal
By means of coagulation of high-frequency electric current, urges the cell necrosis of the epidermis, which can thoroughly eliminate all kinds of spot on the face and the other skin surface. The effect is obvious with no bleeding or scar left.
Usage:

  1. Connect the spot pen to the corresponding outlet.
  2. Connect the power and switch on.
  3. Press the Select button to choose spot remove function, adjust the working time with A /V buttons under the TIME display frame and the working intensity with ♦/V buttons.
  4. Touching the spot with the pen. After treatment, coating antimicrobial for 2 or 3 days.

Attentions:

  1. While doing the treatment, please keep a proper distance between the pen and the skin. Do not insert too deep into the skin or stay at the same position in case the dermis gets burn.
  2. If the spot could not be removed by one time, do again after the scab peel off. Do not scan too deep in case there might be scar left
  3. After the treatment, please avoid strong sunshine or coating with sunscreen cream. Let the scab peel off automatically. Do not peel by hand in case it may be infected and leave a scar.
  4. Before the treatment, please disinfect the spot area and the spot pen.

Maintenance Service

  1. The instrument is under warranty for one year except the accessories and the consumables. We would provide maintain service after the warranty period, but payable.

  2. If you want to replenish or purchase the consumables and accessories, please contact the distributor for advice.

  3. Breakdown cause by human as below is out of our warranty.
    a. Breakdown cause by dismounting or transforming the instrument by customer himself/herself.
    b. Breakdown cause by incorrect or unreasonable maintenance.
    c. Breakdown cause by beating or dropping the instrument
    d. Breakdown cause by incorrect operation.
    e. Damage cause by irresistible disaster like earthquake, fire disaster.

  4. Welcome for any comment and suggestion.

Accessories

Name Qty
Mainframe 1 pc
Power line 1 pc
Ultrasonic probe 2 pcs
Spot pen 1 set

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals