marta MT-4220 Electric Cooker User Manual
- June 9, 2024
- MARTA
Table of Contents
MT-4220 Electric Cooker
User Manual
BEFORE FIRST USE
Unpack the device and remove all labels from it. Wipe the body of the
instrument with a damp cloth, then wipe dry.
USING THE APPLIANCE
- Place the hot plate on a flat, horizontal surface.
- To prevent the appliance from overheating, do not block its ventilation openings. The distance from the walls to the slab must be at least 10cm.
- Place a cookware with a bottom diameter of at least 12 cm in the center of the hob. Do not put empty dishes.
Control Panel
- “ON/OFF” – button on / off the device
- Power/temperature increase button
- Power/temperature decrease button
- Auto off timer button
- Menu button for selecting programs and settings
- Control panel lock button
- Cooktop residual heat indicator
- Power setting indicator
- Temperature setting mode indicator
- Timer indicator
- Control panel lock indicator
Connect the device to the mains.
The device is ready for use and is in standby mode.
Press the “ON” button. / ON” “- (1).
SELECTION OF AUTOMATIC PROGRAMS AND SETTINGS:
Press the menu button on the control panel – (5) to select one of the 5
automatic programs. Select the desired power mode by pressing the buttons –
(3) and – (2) in range from 200 to 2400 watts or temperature from 50 to 500°C
depending on the settings of the selected program.
SETTING THE AUTO OFF TIMER:
Press the button to set the automatic sleep timer settings – (4) and set
the required time until the program ends automatically by pressing the buttons
(3) and – (2) up to 3 hours. After setting the timer settings, the display
will begin a countdown, after which the program you have selected will
automatically end.
CONTROL PANEL LOCK
For safe operation of the device, it has a control panel lock function. To
enable the control panel lock, press the button – (6). Function control panel
lock is enabled. In lock mode, you can turn on the device if it is in standby
mode. If the device is running and lock mode is active, the instrument can be
powered off. Other functions and operating modes of the device are not
available. To unlock the control panel, press and hold the same button (6) for
3 seconds.
To shut down the device, press the button . Do not touch the hob after
switching off while the indicator is active – (7) even if the device has
finished working programs and is in standby mode. This means that the hob is
hot and touching it can cause burns. The appliance’s cooling fan continues to
run some time even after the completion of the work program.
IMPORTANT SAFETY INSTRUCTIONS
Read this manual carefully before using the appliance and save it for future reference.
- Before first use, check the device specifications and the power supply in your network.
- Use only for domestic purposes according to the instruction manual. It is not intended for industrial use.
- For indoor use only.
- Do not operate any product with damage.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the socket. Do not reel the cord around the device housing.
- Never attempt to dissemble and repair the item by yourself. If you encounter problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the item.
- Always unplug the item and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other liquids. If this occurs, immediately unplug it and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not use near explosives and flammable materials.
- Do not move the appliance until it is completely cool.
- Do not touch the metal parts of the device, because they get very hot during operation.
- Do not use hot plate for drying clothes, papers or other objects. Only use it for cooking.
- Always check the temperature of prepared meals, especially if it is suggested to children. Allow the dish to cool down after cooking.
CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply before cleaning.
- Let the unit cool down completely.
- Wipe external surfaces with a damp cloth with some washing-up liquid. Do not use abrasive detergents, any organic solvent or aggressive chemicals.
SPECIFICATION
| 230 V ~ 50 Hz | Cookware Ø |
|---|---|
| Power supply | 12-26 сm |
Producer: COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE
165, RAINBOW NORTH STREET, NINGBO, CHINA Made in China
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating,
rubber seals, etc.) Production date is available in the serial number located
on the identification sticker on the gift box and/or on sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture,
warranty and technical characteristics of the model without notice. Please
check when purchasing device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>