INVENTUM KZ910PD Espresso Coffee Machine Instruction Manual

INVENTUM KZ910PD Espresso Coffee Machine

safety instructions

• First carefully read the instruction manual in full prior to using the appliance and store the manual in a safe place for future reference.
• Only use this appliance for the purposes described in the instruction manual.
• Attention! Avoid contact with the hot surfaces and/or steam!
• Attention! Avoid contact with metal parts, this could result  in personal injury!
• Attention! Avoid making contact with the blades in the filter for coffee capsules, these are very sharp.
• Only connect the appliance to alternate current, to an earthed wall socket, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
• Never bend the power cord sharply or allow it to run across hot parts.
• Fully unwind the cord to prevent it from overheating.
• Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc. Keep the appliance away from walls or other objects that may catch fire, such as curtains, towels (cotton or paper, etc.).
• Always make sure the appliance is placed on an stable, flat and heatresistant surface and is only used indoors at a temperature higher than 0 °C.
• Do not leave the appliance unsupervised if the appliance is operational.
• Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the retailer or our maintenance service.
• If the connection cord of this appliance becomes damaged, it must be replaced by the manufacturer, its customer service or a similarly qualified person in order to prevent hazardous situations.
• Do not pull the cord and/or appliance to remove the plug from the wall socket.
• Never touch the appliance with wet or damp hands.
• Keep the appliance out of reach of children. Children do not see the dangers associated with handling electrical appliances. Therefore, never allow children to operate electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
• The appliance may be used by children of 8 years and older and by persons with restricted physical, sensory or mental capacitiesor a lack of experience or knowledge, provided that they use the  appliance under supervision and are instructed about the safe use of the appliance, and understand the associated hazards.
• Children must not play with the appliance.
• unless they are over 8 years of age and this is done under supervision.
• If the appliance is not being used or is being cleaned, switch off the appliance and remove the plug from the socket.
• Always make sure the appliance is switched off and cooled down and that the plug has been removed from the socket, before you remove parts from the appliance.
• If the appliance does not function after it has been switched on, it is possible that the fuse or earth leakage circuit breaker has been activated in the electrical distribution box. The load on the group can be too high or an earth leakage could have occurred.
• In case of a breakdown, never make repairs yourself; a tripped safety device in the appliance could indicate a defect that cannot be remedied by removing or replacing this safety device. Only original      parts should be used.
• The water reservoir deforms when using hot water, therefore only fill it with cold water. Always use the coffee machine with a closed filter cover.
• Do not switch on the appliance with an empty reservoir.
• Never submerge the appliance, cord or plug in water.
• This appliance is intended for household and similar use, such as:
• in staff kitchens, in shops, offices and other work environments;
• by guests of hotels, motels and other residential environments;
• in Bed & Breakfast type environments;
• farms.
• If the appliance is not used as intended, no compensation can beclaimed in case of defects or accidents and the warranty will be invalidated.
• If you decide to stop using the appliance due to a defect, we recommend cutting the cord after removing the plug from the wall socket. Small household appliances do not belong in the dustbin. Take the appliance to the waste processing department concerned of your municipality

product description

1. Hot plate
2. Operating panel
3. Steam controller
4. Steam pipe handle
5. Removable cup grille
6. Floater
7. Removable leak tray
8.  Cover removable water reservoir
9. Removable water reservoir
10. Steam pipe
11. Attachment steam pipe
12. One-cup filter
13. Two-cup filter
14. Filter holder
15. Filter for coffee capsules
16. Filter holder for coffee capsules
17. Measuring spoon/tamper

operating panel

1. Time indicator
2. Button for 1 cup of coffee
3. Button for 2 cups of coffee
4. On/off button
5.  Manually adjustable coffee button
6. Steam button

prior to first use

Before using the coffee machine for the first time, proceed as follows: Carefully unpack your coffee machine and remove all packaging material and possible promotional stickers. Also do not forget the cover cap at the bottom of the reservoir. Keep the packaging (plastic bags and cardboard) out of reach of children. After unpacking the appliance, carefully check it for externa damage that may have occurred during transport. Place the coffee machine on a flat, stable and heat-resistant surface. It is best to clean the interior of the new coffee machine prior to using it for the first time. This is done as follows:

• Take the removable water reservoir from the appliance, slide the cover upwards and fold it over. Fill the water reservoir with cold drinking water. Do not fill it above the MAX mark. Place the cover back on the reservoir and slide the reservoir back into the appliance.

• Place the one- or two-cup filter without coffee in the filter holder, making sure that the ball at the side of the filter falls precisely into the indentation in the holder. Then place the holder in the appliance from the INSERT position and firmly turn the handle counter-clockwise to the LOCK position.

• Place a cup in the centre of the cup grille and make sure the steam controller is switched off (turned upwards).

• Insert the plug in the socket and press the on/off button ( ) once. The indicator lights on the operating panel start to flash to indicate that the appliance is being pre-heated. When the lights remain on, the pre-heating process has been completed. Attention: During pre-heating, the appliance does not work when pressing the flashing buttons.

• Press the manually adjustable coffee button ( ) and allow the appliance to pump water for approx. 30 seconds. Press the button once more to stop the water flow. Then switch off the appliance, remove the plug from the socket and remove the remaining water from the water reservoir and the cup.

Allow the appliance to cool down and clean all separate parts as indicated in section CLEANING AND MAINTENANCE.

Attention: The appliance can make more noise when pumping water for the first time, this is normal, as the air in the appliance is released. After approximately 20 minutes the noise will decrease.
Important: Only fill the appliance with cold water. Hot water has a negative effect on the coffee machine’s life span.

making espresso/coffee

Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on a flat, stable and heat- resistant surface. Insert the plug in an earthed wall socket.

1. Take the removable water reservoir from the appliance, slide the cover upwards and fold it over.
   Fill the water reservoir with cold drinking water. Do not fill it above the MAX mark. Place the cover back on the
   reservoir and slide the reservoir back into the appliance.

2. Take the filter holder from the appliance by turning it clockwise.

3. Fill the one- or two-cup filter with the required amount of coffee by means of the provided measuring spoon.
   Firmly compress the coffee using the tamper. Depending on your taste, approximately 1 cup of coffee can be
   made with 1 measuring spoon. When using coffee capsules for making coffee, you can place the capsules of
   your taste in the filter provided for that purpose. Attention! Avoid making contact with the blades in the filter for coffee capsules, these are very sharp.

4. Place the filter in the filter holder, making sure that the ball at the side of the filter falls precisely into the indentation in the
   holder. Then place the holder in the appliance from the INSERT position and firmly turn the handle counter-clockwise to
   the LOCK position.

5. Place the required number of coffee cups on the cup grille. Make sure the cups are properly positioned, so that the coffee flows into the cups.

6. Check that the steam controller is switched off (turned upwards). Switch on the appliance by pressing the on/off button ( ).
   The indicator lights on the operating panel start to flash to indicate that the appliance is being pre-heated. When the lights remain on, the pre-heating process has been completed.
   Attention: During pre-heating, the appliance does not work when pressing the flashing buttons.

Press the required coffee button:

• for 1 cup of coffee, the coffee making process stops automatically;

• for 2 cups of coffee, the coffee making process stops automatically;

• to determine yourself how much coffee you want to make, press the button once more when the required amount of
  coffee has been made. If you do not do this, the process stops automatically after 90 seconds. You will run the risk that your cup will overflow! Attention: After making coffee, the indicator lights may start to flash again to indicate that the appliance is pre-heating. When the lights remains on, you can continue making coffee.

• Coffee tastes best immediately after it has been made, so do not wait too long before serving.
  Tips:

• We recommend slightly warming up an espresso cup prior to use, for instance by first placing it on the hot plate on top of the appliance. A pre-heated cup will prevent the espresso from cooling down too quickly.
  • In order to make a good espresso, we recommend pre-heating the appliance. This is done by first making a cup of espresso
  without adding coffee, as a result of which hot water flows through the appliance.
  Warning: Do not leave your coffee machine unsupervised when it is working, because of the manual actions you have to perform.

setting the flow time

The time indication in the display indicates the flow time of your coffee. By default, it is set as follows:

• for 1 cup of coffee, 15 seconds;
• for 2 cups of coffee, 25 seconds.
  According to your own taste, you can adjust the flow time. For this, first place 1 or 2 cup(s) under the appliance. Press the button to be adjusted ( or ) down for 3 seconds. The indicator lights start to flash quickly and the time indicator lights up. Press the button once more, the appliance will start to run, and press the button again when the required flow time has been reached. The time is set. When setting the time for 1 cup of coffee, the flow time for 2 cups will be doubled automatically. When setting the time for 2 cups of coffee, the flow time for 1 cup will be halved automatically. For 1 cup of coffee, the maximum run time that can be set is 45 seconds, for 2 cups this is 90 seconds.

hot water

Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on a flat, stable and heat- resistant surface. Insert the plug in an earthed wall socket.

1. Take the removable water reservoir from the appliance, slide the cover upwards and fold it over.
   Fill the water reservoir with cold drinking water. Do not fill it above the MAX mark. Place the cover back on the
   reservoir and slide the reservoir back into the appliance.

2. Check that the steam controller is switched off (turned upwards). Switch on the appliance by pressing the on/off
   button ( ). The indicator lights on the operating panel start to flash to indicate that the appliance is being preheated.
   When this lights remain on, the water is at the right temperature.
   Attention: During pre-heating, the appliance does not work when pressing the flashing buttons.

3. Turn the steam pipe away from the appliance, use the provided handle for this. Hold a cup under the steam pipe.

4. Turn the steam controller and then press the button . Hot water is spraying from the steam pipe.
   Warning: Never turn the steam controller too quickly, too much steam could be created too quickly otherwise, which in rare cases could lead to an explosion.

When the required volume of water has been reached, press the button once more and turn the steam controller off
(turned upwards). The hot water is ready for use.
Attention:

• If you want to make coffee immediately after using the steam pipe, the indicator lights and clock will flash quickly. The appliance is still too hot for making coffee. After using the steam pipe, we recommend switching off the appliance and allowing it to cool down for at least 5 minutes before making coffee.
• When the appliance fails while steam is being released, the residual heat ensures that steam continuous to be released for a certain period of time. The appliance stops producing steam when you turn the steam controller off (turned upwards)
  Warning: The steam pipe becomes hot, only grab it by means of the supplied handle. 7 hot water 8.

heating up (chocolate) milk

Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on a flat, stable and heat- resistant surface. Insert the plug in an earthed wall socket.

1. Take the removable water reservoir from the appliance, slide the cover upwards and fold it over. Fill the water reservoir with cold drinking water. Do not fill it above the MAX mark. Place the cover back on the reservoir and slide the reservoir back into the appliance.

2. Check that the steam controller is switched off (turned upwards). Switch on the appliance by pressing the on/off button ( ). The indicator lights on the operating panel start to flash to indicate that the appliance is being preheated. When the lights remain on, press the steam button ( ), the indicator light starts to flash. When this light remains on, the water is at the right temperature.

3. Turn the steam pipe away from the appliance, use the provided handle for this.

4. Fill a cup with the drink that you want tot heat up, (chocolate) milk. It is important that the cup used is not too small, observe a minimum diameter of 7.5 mm and take into account that the drink can double in volume when foaming.

5. Remove the attachment from the steam pipe and place the steam pipe in the drink to be heated. If you also want to foam your drink, leave the attachment on the steam pipe. Make sure that the end of the steam pipe is always in the drink (approx. 2 cm), and not only in the foam for example, to prevent liquid from splashing upwards.

6. Slowly turn the steam controller, after which the steam sprays out of the steam pipe and your drink is heated up. The amount of steam can be controlled by turning the button.
   Warning: Never turn the steam controller too quickly, too much steam could be created too quickly otherwise, which in rare cases could lead to an explosion.

7. When your drink has reached the required temperature, turn the steam controller to the closed position again (turned upwards) nd press the steam button ( ) to turn it off.
   After use, you must properly flush though the steam pipe 1 time to remove residues of (chocolate) milk. For this, observe the abovementioned steps and select water at step 5. Throw the water away after flushing. Remove the attachment from the steam pip and clean it as described in section CLEANING AND MAINTENANCE. Do make sure you do not burn yourself!

Attention:

• If you want to make coffee immediately after using the steam pipe, the indicator lights and clock will flash quickly. The appliance is still too hot for making coffee. After using the steam pipe, we recommend switching off the appliance and allowing it to cool down for at least 5 minutes, before making coffee.
• When the appliance fails while steam is being released, the residual heat ensures that steam continuous to be released for
  a certain period of time. The appliance stops producing steam when you turn the steam controller off (turned upwards).

Warning: The steam pipe becomes hot, only grab it by means of the supplied handle.

switching off

After use, always switch off the appliance by briefly pressing the on/off button ( ). When the indicator lights switch off, you can let go of the button and the appliance is switched off. If you do not switch off the appliance yourself, it will switch off automatically after approx. 25 minutes to save energy. After switching off, remove the plug from the socket. After making coffee, do not forget to screw the filter holder out of the appliance and remove the coffee residue. For this, push the flap
on the handle of the holder upwards with your thumb, this makes sure that the filter does not fall out of the holder. Then remove the filter from the holder and rinse it under flowing water. Empty the water reservoir to prevent scaling. Also empty the removable leak tray regularly, the floater in the leak tray becomes visible above the cup grille when the leak tray is full. Allow all parts to cool down before you clean them.

cleaning and maintenance

Regularly clean the coffee machine. This is not only beneficial for the life span of the appliance, it also ensures optimum use of the appliance and, of course, good tasting coffee.
Cleaning should involve the following:

• Prior to cleaning, always check that the coffee machine is switched off, cooled down and that the plug has been removed from the socket.

• Regularly clean the outside of the appliance with a slightly damp cloth and then wipe it dry with a dry cloth.

• Regularly clean the water reservoir, leak tray and cup grille of the appliance with hot water and a mild washing-up liquid. Then rinse thoroughly with hot water and wipe dry.

• Take the filter holder away from the appliance by turning it clockwise. Remove coffee residues and clean the filter holder, filters and measuring spoon/tamper with water and a mild washing-up liquid. Then rinse thoroughly with hot water and wipe dry.
  Attention! Avoid making contact with the blades in the filter for coffee capsules, these are very sharp.

• Remove the attachment from the steam pipe and clean it with hot water and a mild washing-up liquid. Then rinse thoroughly with
  hot water and wipe dry. Wipe the end of the steam pipe clean with a slightly damp cloth and then wipe it dry with a dry cloth.

• Place back all components correctly in the appliance.
  Attention: Never use abrasives, alcohol or solvents when cleaning. Never rinse the appliance under the tap or submerge it in water.

storage

When the coffee machine is not being used for a longer period of time, you must first release the steam in the appliance. This is done as follows:

1. Check that the steam controller is switched off (turned upwards). Switch on the appliance and wait until the indicator lights remain on. Press the steam button ( ) and wait until the indicator light remains on.

2. Turn the steam pipe away from the appliance, use the provided handle for this. Hold a cup under the steam pipe to  collect any  water that is released.
   Warning: The steam pipe becomes hot, only grab it by means of the supplied handle.

3. Then slowly turn the steam controller, after which the steam sprays out of the steam pipe. Allow the steam to be released
   for 3 minutes.
   Warning: Never turn the steam controller too quickly, too much steam could be created too quickly otherwise, which in rare cases could lead to an explosion.

4. Then turn the steam controller closed again (turned upwards) and press the steam button ( ) to turn it off. Allow the appliance to cool down and remove the plug from the socket. Attention! Avoid contact with steam, this could result in personal injury! Store the appliance on a dry location at a temperature that is higher than 0 °C. 12

de-scaling

Regularly de-scale your coffee machine. The de-scaling intervals depend on the hardness of the mains water and the frequency at
which the coffee machine is being used. We recommend de-scaling the coffee machine every 2-3 months. Due to scaling, the   heating element can become obstructed. This causes overheating, as a result of which the coffee machine is switched off automatically as a safety precaution and will no longer function. The coffee machine will have to be repaired. You can de-scale the coffee machine with a special de-scaling agent for coffee machines or with kitchen grade vinegar. If you use a special de-scaling agent for coffee machines, you must observe the instructions on the packaging of this agent.

When using kitchen grade vinegar, proceed as follows:

1. Switch off the appliance by pressing the on/off button ( ) and remove any remaining water from the water reservoir.
2. Fill the water reservoir with clean, cold water and cold kitchen grade vinegar up to the MAX mark. The water and kitchen grade vinegar ratio should be 4:1. Place the filter holder with filter (without coffee) back in the appliance and place a cup on the cup grille.
3. Check that the steam controller is switched off (turned upwards) and switch on the appliance.
4.  Press the manually adjustable coffee button when the indicator light next to the button remains on. Allow the water to flow until your cup is full. Press the button once more to stop the coffee making process and remove the water from the cup.
5. Repeat step 5 once and then wait 5 seconds.
6. Press the steam button ( ) and wait until the indicator light remains on. Make steam for 2 minutes by slowly turning the steam controller. Hold a cup under the steam pipe to collect any water that is released. Turn the steam controller upwards again and press the steam button once more to switch it off.
7.  Switch off the appliance. Wait for at least 15 minutes, as a result the scale will be softened and removed.
8. Switch on the appliance again, wait until the indicator lights remain on and allow the appliance to run until the water reservoir is empty. The de-scaling process has been completed. Empty the cup and the removable leak tray to remove any water.
9. After de-scaling, allow a full reservoir of cold water to flow through the appliance at least 3 times, to remove all de-scaling liquid and vinegar residues and thus prevent a sour taste in the coffee. Repeat all above-mentioned steps, only now do not add kitchen grade vinegar to the water. It is not necessary to wait 15 minutes at point 8. When the appliance has been used 500 times, the indicator lights will flash quickly for 5 times to indicate that the appliance should
   be de-scaled. When the appliance is not de-scaled, this will continue to happen. When the appliance is switched on and all indicator lights are lighting up, hold down buttons and for 3 seconds. The indicator lights at these buttons flash quickly for 3 times and the appliance starts to count from 0 again.
   Attention! If the coffee machine has not been used for some time, e.g. due to vacation, it is recommended to remove and clean all separate components. Then place the cleaned separate components back on their place and allow the coffee machine to make one run with clean water. In this way you will prevent a possible foreign taste.

breakdowns and solutions

In case of a breakdown, you must:

•  switch off the appliance, if possible;
•  remove the plug from the socket;
• apply for a repair;
• some small problems can be resolved by the user himself, using the instructions in the table below. Check all points in the table in sequence, before contacting the maintenance or customer service.

Attention: Never repair a fault yourself. When the solution is not mentioned in the table above, please contact the maintenance
department or customer service department.

References

• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
• Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>