Hanwha Vision SPA-D1000 IP Audio Module User Guide
- June 9, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SPA-D1000 IP Audio Module
SAFETY INFORMATION
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION
GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
Apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
To prevent injury, this apparatus must be securely attached to the
Wall/ceiling in accordance with the installation instructions.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR
BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
ATTENTION
These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do
so.
The ITE is to be connected only to (PoE/PoE+) networks without routing to the
outside plant.
The wired LAN hub providing power over the Ethernet (PoE/PoE+) in accordance
with IEEE 802.3af/at shall be a UL Listed device with the output evaluated as
a Limited Power Source as defined in UL60950-1 or PS2 as defined in UL62368-1.
Unit is intended for installation in a Network Environment 0 as defined in IEC
TR 62102. As such, associated Ethernet wiring shall be limited to inside the
building.
Important Safety Instructions
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.
(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.) -
Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/ accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over. -
To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance with the installation instructions.
-
Unplug this apparatus during lighting storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2” and rated from PoE(802.3af) : 44V-57V ( ), max 300mA / PoE+(802.3at) : 50V-57V ( ) max 510mA.
-
This product is intended to be supplied by isolation power.
-
If you use excessive force when installing the product, the product may be damaged and malfunction. If you forcibly install the product using non-compliant tools, the product may be damaged.
-
Do not install the product in a place where chemical substances or oil mist exists or may be generated. As edible oils such as soybean oil may damage or warp the product, do not install the product in the kitchen or near the kitchen table.
This may cause damage to the product. -
When installing the product, be careful not to allow the surface of the product to be stained with chemical substance.
Some chemical solvents such as cleaner or adhesives may cause serious damage to the product’s surface. -
If you install/disassemble the product in a manner that has not been recommended, the production functions/performance may not be guaranteed.
-
Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area.
-
Do not place this apparatus near conductive material.
-
Do not attempt to service this apparatus yourself.
-
Do not place a glass of water on the product.
-
Do not install near any magnetic sources.
-
Do not place heavy items on the product.
-
Please wear protective gloves when installing/removing the product.
The high temperature of the product surface may cause a burn. -
This device has been verified using STP cable. The use of appropriate GND grounding and STP cable is recommended to effectively protect your product and property from transient voltage, thunderstroke, communication interruption.
-
In particular installation environments, there might be interference in radio communications.
When interference of electromagnetic waves occurs between the product and radio communication device, it is recommended to keep a certain distance between the two or change the direction of the receiving antenna. -
An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection.
-
Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
The battery cannot be replaced. -
Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location.
-
Select an installation site that can hold at least 5 times the product’s weight.
-
Stuck-in or peeled-off cables can cause damage to the product or a fire.
-
For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case. -
We do not guarantee the quality of third-party products (e.g. accessories) that you separately purchase.
COMPONENT
As for each sales country, accessories are not the same.
INSTALLATION
- Not Included : Micro SD Card
- Not Included (M4 x L20)
ACCESS THE AUDIO MODULE
The PC should be connected to the same network as the product when accessing
the product for the first time.
Use a network cable to connect the product’s NETWORK port to the switching hub
that is connected with the PC.
- Set an IP address to 192.168.1.x, the same band as the product, in the network property of the PC. (e.g. 192.168.1.100)
- Run a web browser on the PC.
- Enter the initial IP address of the product (192.168.1.99) into the address bar to connect.
- An available web browser is Google Chrome (Version 99.0.4844.82 or higher).
- Google Chrome is available at www.google.com/chrome.
- For the computer OS, it can be used in Windows 10 or Mac 10.15 (Catalina) or 11 (Big Sur).
SETTING A PASSWORD
When you are attempting to access the product through the web browser for the first time, the login password must be registered.
-
A password should contain 8 or more characters, and if it contains fewer than
9 characters, then a combination of 3 or more English uppercase/lowercase letters, numbers, or special characters must be used. If it includes 10 to 16 characters, a combination of 2 or more types must be used. -
It is recommended not to use the same character repeatedly or consecutive keyboard inputs as passwords for enhanced security.
LOGIN
Whenever you’re accessing the product, the login window will be displayed.
You must enter the user ID and the preset password in order to access the
product.
- Enter “admin” in the
input field. - Enter the password you set in the
field. - Click [Login].
- If you lose the password, you must press the [RESET] button on the product for about 12 seconds in order to reset the product. When the product is reset, all the other set values will be reset as well, so be careful not to lose the password.
- Do not disconnect the power until the system initialization is complete after pressing the [RESET] button of the product or during product resetting. It will take up to 10 minutes to reboot after resetting the product.
Important
Please check ‘Manuals’ from our website, before connecting to the Supply,
https://www.hanwhavision.com/en/download-data/
Hanwha Vision cares for the environment at all product manufacturing stages,
and is taking measures to provide customers with more environmentally friendly
products.
The Eco mark represents Hanwha Vision’s devotion to creating environmentally
friendly products, and indicates that the product satisfies the EU RoHS
Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>