Hanwha Techwin SBP-390WMW2 Wall Mount Adaptor User Guide
- June 9, 2024
- Hanwha Techwin
Table of Contents
Wall Mount Adaptor
SBP-390WM2(IVORY)
SBP-390WMW2(WHITE)
Package
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- Wall mount adaptor can be installed directly on the wall.
Installation
-
Pull out the external power cable, BNC cable and communications cable (for connecting to the “camera”) through the rear of the Wall Mount Adaptor into the Pipe.
` Then, it is recommended to keep the cables in a distance of about 100 mm from the pipe. -
Secure the Wall Mount Adaptor to the wall, corner or pole using the “Anchor Bolts or Nuts (M10)”.
` When installing the product on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
-
Mount the Camera set on the Pipe.
` Install the camera according to the camera’s installation guide.
※ Caution for water prevention
Product Specifications
- Weight : 1.79 kg
- Material : Aluminum
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>