BYTECH BY-AU-BS-227-AC Multicolor Galaxy Speaker User Manual
- June 9, 2024
- Bytech
Table of Contents
BYTECH BY-AU-BS-227-AC Multicolor Galaxy Speaker
Product Information
This product complies with part 15 of the FCC Rules, ensuring that it meets the standards for electronic devices in the United States. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Additionally, this equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This ensures that the product is safe for use and does not pose any harm to users.
Product Usage Instructions
When using this product, ensure that it is operated in compliance with the above-mentioned conditions. The device should not cause any harmful interference and should be able to accept any interference received. This ensures that the product operates smoothly and without any issues.
Additionally, it is important to note that this product complies with FCC radiation exposure limits set forth for an uncontrolled environment. This means that the product is safe for use by individuals and does not pose any harm to users.
It is recommended to read the user manual thoroughly before using the product to ensure that you are aware of all operating conditions and safety guidelines.
Notice:
Please read user manual carefully and keep It for
your records.
Package includes
- l (One) Wireless Speaker 4.881n. x 4.881n. x 3.941n. (12.39cm x 12.39cm x 10cm)
- l (One) Micro USB Cable
- l (One) User Manual
Safety Instructions
- Never dissemble the Bluetooth Speaker In an attempt to make any repairs as this could result In electrical shock, burns or product failure;
- Use extra caution In high temperatures;
- Do not use product In a hospital or on an airplane;
- This speaker Is waterproof grade Is IPX6, which means that the product remains functional only from splashing water. Please do not submerge into water.
- Do not expose the device to direct sunlight, heat or flame;
- Product is not covered under warranty when the product has metal rust, surface spelling and any other natural oxidation;
- Damage, shock, and/or injury can occur if these warnings are not heeded;
- Device may became warm while charging;
- Make sure you always turn the product off and the power outlet off completely before unplugging the product;
- Make sure the product has plenty of ventilation;
- Do not press the buttons too hard as It could damage the product;
- Only use dry cloth to keep product clean from dust;
- Do not use chemicals on this product;
- Never try to repair this product yourself, take It to a certified technician. Trying to remove panels or repairing the unit yourself could lead to electric shock. When the unit
- Is not In use, make sure It Is correctly turned off and stored In a cool dry place;
- Do not Insert foreign objects Into the product;
- Avoid dropping the product, as harsh Impacts could damage the product.
Charging
- Connect the small end of the Micro USB charging cable (Included) to the Micro USB port located on the back of the speaker. Connect the larger end of the cable to your computer’s USB port or an AC adaptor (not included);
- The LED indicator will turn red while charging.
Pairing
- Place speaker within 30 feet of the Bluetooth enabled device.
- Slide the ON/OFF button to the ON position. The blue LED will flash rapidly to indicate that the speaker is in Bluetooth pairing mode;
- On your Bluetooth enabled smartphone, tablet or media player, navigate to the Bluetooth setting menu, turn on the Bluetooth feature, and search for new devices;
- Search for ‘BY-BS-227′ on the pairing device. Type Password ·oooo· or· 1234’ If requested;
- Tap this model to select It and successfully pair It with the speaker. The blue LED will flash slowly when the pairing Is successful. You are now paired connected and ready to play music.
TWS function:
When 2 Galaxy Speakers are powered on, double cllck the “ ” button on either of 2 speakers untll you hear a prompt “‘ding” the 2 speakers are connected to each other.
Light flashing mode:
Click “ ” button.
FM MODE:
Long press “ ” button to switch to FM mode.
Troubleshooting
-
No power:
Recharge your speaker using the included micro USB cable. Try using a different cable. -
Music is not playing over Bluetooth:
Make sure your Bluetooth device has A2DP profile. Check if both devices are paired and connected over Bluetooth. Restart the speaker to reconnect our Bluetooth device. -
Bluetooth device will not reconnect with the speaker:
Navigate to your Bluetooth settings menu on your Bluetooth device, tap “BY-B5-227. and select “Forget·. Now follow the steps to pair your device again.
Specifications
- With FM, Bluetooth®, and TWS function
- Input: 5V
- Battery Capacity: 400 mAh
- Sound Output: 3W
- Charge Time: up to 2 hours
- Play Time: up to 2 hours
- Operating range: 33 feet (10m)
- Battery: Built-in Li-ion
- Compatible with most Bluetooth® enabled tablets and smartphones.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Frequently Asked Questions
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receMng antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
WARRANTY- 12 MONTH
Please visit our website
Bytechintl.com/warranty
©2022 BYTECH NY INC.
BYTECH™ is a registered trademark. of Bytech NY INC.
Bluetaoth® is a registered trademark: of SIG.Inc
- All Trademarb and copyrights ore the property of the respective companies.
- Photos ore for iYustration purposes only.
- CLASS l LED PRODUCT
BYTECH
Contact Info:
2585West 18thSlreet,
Brooklyn. NV 11223
IBYTEctUtfiiM
C 2022 BYTECH NY INC.
FCC ID: 2AHN6-AUBS227
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>