HYUNDAI H610A Pro Series Motherboard User Manual

: June 9, 2024
: HYUNDAI

Table of Contents

HYUNDAI H610A Pro Series Motherboard User Manual
Limited Warranty does NOT cover:
Accessories
Specifications
Motherboard Layout
Interface Definition __
1-JBAT (Clear CMOS jumper) :

HYUNDAI H610A Pro Series Motherboard User Manual

Limited Warranty does NOT cover:

**** Any costs associated with the repair or replacement of the Product incluiding labor, installation or other costs incurred by you, and in particular, any costs relating to the removal or replacement of any Product that is soldered or otherwise permanently affixed to any printed circuit board; OR
Damage to the Product due to external causes, incluiding accident, problems with electrical power, abnormal electrical, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing; OR
Any Product which has been modified or operated outside of specifications or where the original identification markings (trademark or serial number) has been removed, altered or obliterated from the Product, or where the label or screw on the exterior of the Product is removed or broken.

Thanks for purchasing the H610A PRO Series Motherboard. This series of motherboards provide excellent performance and quality assurance.

Accessories

Motherboard x1
SATA Cable x1
I/O Shield x1
User Guide x1

Specifications

Motherboard Layout

The terms HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrador, Inc.
Note: This picture is for reference only, please refer to the actual product!

Interface Definition __

1-JBAT (Clear CMOS jumper) :

If (a) the CMOS data is damaged, (b) you forget the administrator or user password in the BIOS menu,

(c) Unable to boot due to incorrect CPU frequency setting in the BIOS menu, (d) When the CPU or memory module has changed, it is time to clear the CMOS settings. This header uses a jumper cap to clear the CMOS settings and reset the BIOS to default values.

Pin	Pin Definition
1-2	Clear CMOS

Pin 1 and 2 open circuit (Default value): Normal state
Pin 1 and 2 shorted: Clear CMOS settings

Clear CMOS setting and load default:

Turn off the system
Short-circuit pin 1 and pin 2 and wait for a few
Turn on the system
If the BIOS CPU frequency setting is incorrect, please press the ~~key immediately after rebooting to enter the BIOS setting menu.~~
Set the CPU speed back to default or to an appropriate
Save and leave the BIOS setup

2/3 SPEAKER / FPANEL (PC speaker pin / front control panel connector

pin):

The power button on the front panel of the computer case, the system restart button, the speaker, the system indicator light, etc. can be connected to this pin. Please refer to the following definitions and pay attention to the positive and negative (+/-) poles of the pins when connecting.

Pin	Pin Definition
1	SPK +
2	NC
3	NC
4	SPK –

PWR-LED (Power LED) – Connect to the power LED wire.
PWR-ON (Power button) – Connect to the power button wire.
HDD_LED (Hard disk indicator) – Connect to the hard disk indicator cable.
RESET (Reset button) – Connect to the restart
button cable.
SPEAK (PC speaker port) – Connect to the system speaker cable]

CPU_FAN

Pin	Definition
1	GND
2	+12V
3	Speed detector
4	Speed Control

PSYS_FAN

Pin	Definition
1	GND
2	+12V
3	Speed detector
4	Speed Control

5.8-ATX_12V/ATX (8-pin 12V power socket / 24-pin ATX main power socket):

These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors are completely fitin. The PWR12V1 power socket mainly provides CPU power. If it is not plugged in, the computer will not start.
Note: If you use a 20-pin ATX power supply socket, please insert it near pin 1 & pin 13.

7-F_AUDIO (Front Audio Output Socket):

Pin	Silkscreen	Definition	Pin	Silkscreen	Definition
1	PROT1L	Mic left channel	6	SENSE1-RETURN	Detect mic signal
2	AGND	AGND Ground pin	7	SENSE-SEND	Detect signal return from HD, HD

10/11-F_USB30 / F_USB20 (USB external interface socket):

Pin	Definition	Pin	Definition
1	VCC	2	VCC
3	Data 0-	4	Data 1-
5	Data 0+	6	Data 1+
7	Ground	8	Ground
	10	NC

This socket supports USB 2.0/1.1 specifications, and through the USB extension baffle, one socket can connect two USB ports. The USB expension shield is an optional accessory, you can

This socket supports USB 3.0/1.1 specifications, and through the USB extension baffle, one socket can connect two USB ports. The USB expension shield is an optional accessory, you can
contac your local agent to purchase it.

9-COM-A (COM connector socket):

This is a COM-A socket, and a set of serial ports can be connected through the serial port expanded baffle.

COM-A

| Definition| Pin| Definition
---|---|---|---
1| DCD| 6| DSR
2| RXD| 7| RTS
3| TXD| 8| CTS
4| DTR| 9| RI
5| GND| 10| NC

O (Back Panel IO Connector):

PS/2 Keyboard: PS / 2 mouse / keyboard port.
HDMI: Onboard HDMI port, connect to HDMI
USB: 2x USB 2 gen1 connectors, 4x USB2.0 connectors.
VGA: Onboard VGA port, connect to
DP: Digital video
LAN: The standard RJ-45 jack is for connection to single Local Area Network (LAN). You can connect a network by cable.
AUDIO: Line-In (Blue): Used for external CD player, tape player or other audio
Line-Out (Green): This connector for speakers or
Mic (Pink): Plug to connect external

CPU Installation

Step 1

Please do not remove the protective cover before installing the CPU

Step 2

Push the lever outwards

Step 3

Please install the CPU in the correct direction

Step 4

Buckle down the lever to secure the CPU.

Warning

Before you install the radiator, please evenly coat the surface of the CPU with thermal
Please keep the CPU protective cover for future

If the CPU socket pins of the motherboard are damaged due to improper operation, the warranty will not be granted

Memory Module Insta llation

The motherboard support 2 memory module slot.
Dual-channel
Dual-channel operation will improve system
Dual-channel operation requires the following conditions: Both channels must have the same capacity of memory and have the same type
Dual-channel memory slots are the same color to help you identify pairs of For better performance plug the memory into the same color slot. (Based on actual object).

Step 1

Unlock a DIM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch the DIMM matches the break on the slot.

Ilustrate

The ilustration are for reference only and do not represent the actual product.
The information contained herein is subject to change without notice. The only warranties for Hyundai and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hyundai Technology shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: March 2023