8BitDo LiteSE Bluetooth Gamepad User Manual

LiteSE Bluetooth Gamepad
User Manual

LiteSE Bluetooth Gamepad

• press home button to turn on the controller.
• hold home button for 3 seconds to turn off the controller.
• hold home button for 8 seconds to force the controller off.

Switch

• NFC scanning, IR camera, HD rumble, notification LED are not supported, nor can the
  system be waken up wirelessly.
• the status LED indicates the number of players, Its LED on for the first player, the Sit and 2nd
  LEDs on for the second player, up to 8 players maximum.

Bluetooth Connection

1. turn the mode switch to S.
2. press home to turn on the controller, LED starts to rotate from left to right.
3. hold pair button for 3 seconds to enter its pairing mode. LED stops blinking for a short moment then starts to rotate again.(This is required for the very first time only)
4.  go to your Switch home page to click on Controllers, then click on Change grip/order, and wait for the connection.
5. LED becomes solid when connection is successful.

Wired Connection

• please ensure the [Pro Controller Wired Communication] is enabled.
• OTG cable is required for Nintendo Switch Lite.

1. turn the mode switch to S.
2. connect the controller to the USB port of your Switch dock, wait till the controller is successfully recognized by your Switch to play.

Android

• required system: Android 9 or above

Bluetooth Connection

1. turn the mode switch to D.

2. press home to turn on the controller, the 1st LED starts to blink.

3. hold pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right.
   (This is required for the very first time only)

4. go to your Android device’s Bluetooth setting, and pair with [8BitDo Lite SE], LED becomes solid when connection is successful.

Wired Connection

• OTG support is required on your Android device, please contact your device manufacturer for more details.

  1. turn the mode switch to D.
  2. connect the controller to the USB port of your Android device, wait till the controller is successfully recognized by your Android device to play.

Apple® required system: iOS 16.3, pads® 16.3, tv0S®16.3, macOS® 13.2 or above.

Bluetooth Connection

1. turn the mode switch to D.
2. press home to turn on the controller, the ist LED start to blink.
3. hold the pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right. (this is required for the very first time only)
4. go to your Apple device’s Bluetooth setting and turn it on, pair with [8BitDo Lite SE], LED becomes solid when connection is successful.

Wired Connection
USB wired connection is only available for macOS or iPad devices with USB-C ports.

1. turn the mode switch to D.
2. connect the controller to the USB port of your Apple device, wait till the controller is successfully recognized by your Apple device to play.

Turbo

• the 4th LED blinks continuously when the button with the turbo functionality is pressed.
• the star button is the screenshot button when connected to Nintendo Switch.
• D-pad, joysticks, home, +, – buttons are not supported.
  Hold the button you would like to set turbo functionality to, then press the star button to activate/deactivate its turbo functionality.

Button swap

• the 4th LED blinks continuously when the swapped buttons are pressed.
• ALBLX YL. R.L2, R2. L3, R3 are supported.

Hold either two buttons you would like to swap, then press the star button to activate/deactivate the button swap.

Battery

About 20 hours of play time with a 480mAh built-in battery pack, rechargeable with 1 hour charging time.

controller will turn off in ‘1 minute with no connection or 15 minutes of inactivity when connected with Bluetooth.
controller stays on with wired connection.

Support

• please visit support.8bitdo.com for further information & additional support.

https://manual.8bitdo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>