OLIGHT PL-3R VALKYRIE Rechargeable Rail Mounted Tactical Light User Manual
- June 9, 2024
- OLIGHT
Table of Contents
OLIGHT PL-3R VALKYRIE Rechargeable Rail Mounted Tactical
Product Information:
The PL-3R Valkyrie is a WML (Weapon Mounted Light) with a maximum output of
1,500 lumens. It comes equipped with a built-in 900mAh rechargeable lithium
polymer battery and has a working temperature of up to 40°C. The light has a
cool white CCT of 5700K and a CRI of 70. It has a cable length of MCC and is
IPX6 rated.
The product dimensions are (L)81(W)36.6(H)32.5mm and it weighs 107g/3.77oz.
Product Usage Instructions:
-
Charging: Connect the MCC cable to the input port of the PL-3R Valkyrie and the output port to a power source. The LED indicator will turn red to indicate charging and will turn green when charging is completed.
-
To install the light, first screw off the adapter and screw. Adjust the installation position of the light and screw on the adapter and screw
-
To turn the light on/off, quickly single press (press and then quickly release) any key. Click the button again to turn off the output.
-
To lock the key, in the off state, first press any button and hold it (for about half a second or more), then press the other button, press and hold the two buttons simultaneously (for about 2 seconds or more) until the output is turned off. The product ha now entered the lock key state. When the key is locked and turned off, press and hold any key to output a lower brightness (about 100 Lumens), and release the key to turn off the output.
-
To activate momentary on, press and hold any key. To deactivate momentary on, release the key.
-
To change the brightness level, double press any key. Hold the key (for longer than 1 second) on the last press to change to high brightness (blink once for high 2 and twice for high 1) and release the key to complete the process.
-
To access direct high brightness, press both buttons simultaneously.
-
In the off state, quickly click any key more than 10 times, press and hold (for more than 1 second) on the last press. At this time, you can change the high brightness (blink once for brightness 2, blink twice for brightness 1), release the key to finish the process.
-
To activate strobe mode, press both buttons simultaneously. The strobe will continue when the button is released. Click any button to turn off the strobe.
IN THE BOX
- PL-3R Valkyrie
- MCC
- 1913 Adapter and Screw
- H2.5/H1.5 Wrench
Product Specification
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>