COREMORROW E63.C1K Piezo Controller Software User Manual

June 9, 2024
COREMORROW

COREMORROW Logo E63.C1K Piezo Controller Software
User Manual
COREMORROW E63.C1K Piezo Controller
Software

This document describes the following products:

  • E63.C1K Piezo Controller Open loop 1 channel

USB Connection

Install usb device driver: Check device manager.

COREMORROW E63.C1K Piezo Controller Software - usb device
driver

  1. Click “Scan USB Devices”;
  2. Then click the “Connect” button. If there is USB device, select the USB to be opened through the drop-down menu.
  3. Open the USB successfully.

Single Point Control

  1. Fill in the output voltage, and then click “Send” to complete the output voltage control; Accordingly, the actual output voltage is displayed in the lower right corner.
  2. Zero”: Fill “0” in the edit box and send 0 to the piezo controller to control the reset voltage.
  3. Step length: fill in the control amount of small step.
    Select ” +” ,add the step size value to the current position.
    Select “-” , subtract the step size from the current position.COREMORROW
E63.C1K Piezo Controller Software - Single Point Control

Programmable Control

Operational control from A to B, setting the coordinates of A and B, then run time from A to B which compose run track of A to B, run time of serial port and USB by sending points data.

COREMORROW E63.C1K Piezo Controller Software - Programmable
Control

System Information

After scanning and turning on the USB, system parameters can be read with minimum voltage of 0V and maximum voltage;
The system reads the information automatically;The maximum displacement is filled in according to the experimental report.

COREMORROW E63.C1K Piezo Controller Software - System
Information

Waveform Control

COREMORROW E63.C1K Piezo Controller Software - Waveform
Control

Fill in the waveform data: peak-to-peak value, frequency, bias and waveform information, and then click “Send” to complete the input of waveform, and the waveform is output until “stop” is clicked;
This intermittent control does not stop until the “stop” is clicked.

Contact us

Harbin Core Tomorrow Science & Technology Co., Ltd.
Tel: +86-451-86268790
Email: info@coremorrow.com
Website: www.coremorrow.com
Address: Building I2, No.191 Xuefu Road, Nangang District, Harbin, HLJ, China
CoreMorrow Official and CTO WeChat are below:

COREMORROW E63.C1K Piezo Controller Software - Qr Code| COREMORROW E63.C1K Piezo Controller Software - Qr Code
1
---|---
http://weixin.qq.com/r/PEzawqnEyfS2re2h9xku| https://u.wechat.com/EAOWfcTPsTfQdVIeK41V9hg

COREMORROW Logo Version: V1.0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals