iFox CREATIONS IF012 Waterproof Bluetooth Speaker MP3 Player and Speakerphone User Manual

iFox CREATIONS IF012 Waterproof Bluetooth Speaker MP3 Player and

Speakerphone

Product Information

This text-extract is not providing any clear information about the product. It seems to be a string of random characters. Product Usage Instructions: Unfortunately, the text-extract does not provide any instructions on how to use the product. It is recommended to refer to the actual product user
manual or contact the customer support team for assistance.

KEY FUNCTION

• Hold the power button for 3 seconds to switch the speaker on and off.
• Short press to play or pause the music. Long press to connect or cut off the TWS connections of two speakers.
• Long press to play the previous song. Short press to turn down the volume.
• Long press to play the next song. Short press to turn up the volume.
• Short press to answer or end phone call Long press to reject an incoming call. Double click to redial the last phone number. Long press to cut off or reconnect the wireless connection with the device.

MAIN FEATURE

• Bluetooth 5.0
• Waterproof IP grade: IP67
• Floats in the water
• Hands-free speakerphone
• Strong suction cup
• Portable with a hook for a carabiner clip
• Charging by USB cable
• True wireless stereo (TWS) SPECIFICATIONS
• Frequency Range: 100Hz-20KHz
• Operating Distance: 10 meter
• Microphone: Built in
• Power Rating: 5W
• SNR: 85+2 dB
• Charging Voltage: DC 5V
• Battery Capacity:1 000mAh
• Charge Time: Approx.3.5 hours
• Playback Time: Approx. 8 hours

BLUETOOTH PAIRING

Please charge the speaker for 3 hours prior to the initial use.

1. Place your phone or media playing device next to the speaker. Press & hold the power button for 3 seconds to power it on and it is now ready to pair. It will automatically turn off again after 10 minutes without a Bluetooth Connection.

2. Activate the Bluetooth feature on your media playing device and search for “My Speaker F012” from the list.
   Tap on this to pair with the speaker. Enter “0000” if the media device prompts for a password.

3. If pairing fails, please refer to the user manual of your media playing device for Bluetooth setup. Remove all the excess unused models from the list of paired devices and start over from step 1 again.

TWS CONNECTION

True Wireless Stereo (TWS) supports two speakers synchronously through a Bluetooth connection. forming a left and right channel stereo effect. Follow these instructions when first using the TWS function:

1. Turn on one of the speakers and pair your device to this ‘host speaker’ with a fixed blue light.
2. Turn on the second speaker in Bluetooth mode with blinking blue light.
3. Long press on the host speaker. Stop pressing after you \.J hear the connection sound. The two speakers will automatically

IN TWS MODE

You can control the volume. change previous song/next song, play/pause, power off, etc. from either of the two speakers.
Press and hold to cut off the TWS connection from either of the two speakers. To reconnect TWS, long press on the host speaker.

NOTE

TWS only works with Bluetooth. When answering an incoming call. the caller’s voice can only be heard through the host speaker.
When using True Wireless Stereo (TWS) function for the first time, both speakers will take more time for searching and pairing with each other before connecting successfully.

PACKAGE CONTENTS

• iF012 Waterproof Bluetooth Speaker
• USB Charging Cable
• Portable Carabiner Clip
• Dedicated Suction Cup
• User Manual

RECHARGING THE DEVICE
The Bluetooth Speaker is powered by a built-in rechargeable lithium battery and can be charged as follows:

1. Release the DC 5V charging port cover.
2. Connect the USB charging cable to a standard USB charging port such as computer or a USB wall charger to the DC 5V charging port on the speaker.
3. The red LED light is on while charging and off when fully charged.

TROUBLE SHOOTING

iF012 can’t be

powered on

| Low battery level.| Recharge the battery

Not able to pair with the speaker| iF012 is already on or not in pairing mode.| Refer to “Bluetooth pairing section”.
 | Battery is not| 1. Please continue to
 | charged up or| click (short press) on
Volume too low| volume is not set to| the volume up button.
 | the maximun on both| 2. Increase the volume
 | iF012 & media player.| on the media players.

SAFETY INSTRUCTIONS

1. Please make sure the plug cover on the charging port is tight before use.
2. Keep the product away from extreme weather to protect the unit against electric shock, explosion or bodily injury.
3. Do not use the product in excessive heat. such as direct sunlight, stoves or open flame.
4. Keep the speaker out of reach of children. Do not use the speaker at excessive volume levels as it may damage hearing.
5. Clean the product with a soft cloth without using harsh corrosive chemicals. Always unplug from the power source before cleaning.
6. Do not puncture or disassemble the exterior surface of the speaker in any way.
7. Do not insert any metal object into the device to protect the unit against electric shock.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
  (2) this device must accept any interference received, including interference that may cause undesired operation.

• The device has been evaluated to meet general RF exposure requirement.

Product Featured

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>