BRAYER BR4208 Vacuum Cleaner Instruction Manual

BRAYER BR4208 Vacuum Cleaner

Product Information

Vacuum Cleaner BR4208

The Vacuum Cleaner BR4208 is a device designed for dry cleaning of rooms. It comes with various attachments such as the Parquet Brush, Narrow Brush, Brush for Cleaning Furniture/Upholstery, and Accessory Holder. The device also consists of Dust Bin Upper Lid, Cyclonic Filter, Inlet Filter, and Foam Filter. The vacuum cleaner is equipped with a Cyclonic filter that eliminates garbage and dust from the air, and the inlet filter and the foam filter retain the finest dust particles. The outlet HEPA filter is also included to ensure that the air released from the vacuum cleaner is clean.

Product Usage Instructions

1. Read the operation manual carefully before using the vacuum cleaner. After reading, keep it for future reference.
2. Make sure that the voltage specifications of the unit correspond to the specifications of your mains.
3. Before switching on and using the vacuum cleaner, make sure that the Cyclonic filter, the filters, the dust bin, and the outlet HEPA filter are installed properly.
4. Attach the telescopic pipe and the required attachments to start using the vacuum cleaner.
5. Use the Floor/Carpet Brush to clean carpets and floors. Use Upholstery/Upholstery Brush to clean fabric surfaces of upholstered furniture, and for collecting dust from the surface of furniture.
6. Ensure that the filters are always clean because the overall performance of the vacuum cleaner depends on it.
7. Do not use the vacuum cleaner in areas where inflammable liquids are stored or used or sprayed. Do not use it in places where smoking cigarettes or cinders are present.
8. Do not switch on the vacuum cleaner if any of its openings is blocked. Do not clean the vacuum cleaner with any foreign objects.
9. Do not use the vacuum cleaner for commercial or laboratory purposes.
10. Do not allow children to play with polyethylene bags or packaging film as it may cause suffocation.

DESCRIPTION

1. Floor/carpet brush
2. «Floor/carpet» switch
3. Telescopic pipe lock
4. Telescopic extension pipe
5. Flexible hose handle
6. Manual suction power control
7. Flexible hose
8. Flexible hose ending
9. Ending locks
10. Air inlet
11. Dust bin
12. Carrying handle
13. Dust bin lock button
14. Power cord winding button
15. Brush storage
16. Vacuum cleaner on/off button
17. Suction power control
18. Outlet filter grid
19. HEPA filter
20. Dust bin bottom lid
21. Dust bin bottom lid clamp
22. Dust bin flask
23. Dust bin upper lid
24. Cyclonic filter
25. Inlet filter
26. Foam filter
27. Parquet brush
28. Narrow brush
29. Brush for cleaning furniture/upholstery
30. Accessory holder

SAFETY MEASURES AND OPERATION RECOMMENDATIONS

Read the operation manual carefully before using the vacuum cleaner; after reading, keep it for future reference.

• Use the unit for its intended purpose only, as it is stated in this manual.
• Mishandling the unit can lead to its breakage and cause harm to the user or damage to the user’s property, which is not covered by warranty.
• Make sure that the operating voltage of the unit indicated on the label corresponds to your home mains voltage.
• To avoid fire, do not use plug adapters for connecting the vacuum cleaner to the mains.
• Do not touch the vacuum cleaner body, the power cord and the power plug with wet hands.
• Do not use the vacuum cleaner if the dust bin is not installed or installed improperly, or if the inlet and outlet filters are not installed.
• Use only the parts and attachments supplied with the unit.
• Never leave the unit connected to the mains unattended.
• Do not use the vacuum cleaner outdoors.
• It is not recommended to use the unit during lightning storms.
• Protect the unit from impacts, falling, vibrations and other mechanical stress.
• Do not use the unit near heating appliances, heat sources or open flame.
• Do not use the vacuum cleaner in places where aerosols are used or sprayed, and in proximity to highly inflammable liquids; do not use the vacuum cleaner in the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting water or other liquids.
• Do not use the vacuum cleaner for collecting burning or smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of plaster, concrete, flour or ashes.
• Do not use the vacuum cleaner to clean your pets’ fur.
• Keep free hanging clothes, hair and other parts of your body away from the air inlets of the brush or the attachments while room cleaning.
• Do not cover the inlets and outlets of the vacuum cleaner with any foreign objects. Do not switch the vacuum cleaner on if any of its openings is blocked.
• Do not run over the power cord with the vacuum cleaner while room cleaning to avoid damaging it.
• Do not use the power cord as a handle for carrying the vacuum cleaner; carry it by the handle.
• Regularly clean the dust bin and the filters of the vacuum cleaner.
• After you finish using the vacuum cleaner or before cleaning it, switch the unit off with the on/off button and unplug it.
• When unplugging the vacuum cleaner, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage and cause a short circuit.
• For children safety reasons do not leave polyethylene bags used as a packaging unattended.

Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using the unit as a toy.
• Do not allow children to touch the operating surface, the unit body, the power cord or the power plug during the operation of the unit.
• Be especially careful if children or disabled persons are near the operating unit.
• During the unit operation and breaks between operation cycles, place the unit out of reach of children.
• The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under the supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
• From time to time check the power cord insulation.
• If the power cord is damaged, it should be replaced by the manufacturer, maintenance service or similarly qualified personnel to avoid danger.
• Do not repair the unit by yourself. Do not disassemble the unit by yourself; if any malfunction is detected, and after the unit has been dropped, unplug it and apply to the service center.
• To avoid damage, transport the unit in the original package.
• Keep the unit in a dry cool place out of reach of children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative temperature, unpack it and wait for at least 3 hours before using it.

• Unpack the unit and remove all the packaging materials.
• Keep the original package.
• Read the safety measures and operating recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do not plug it into the mains.
• Make sure that the given specifications of supply voltage of the unit correspond to the specifications of your mains. When the unit is used with the mains with 60 Hz frequency, no additional action is necessary.

USING THE ATTACHMENTS

Floor/carpet brush
When using the brush (1) set the switch (2) to the necessary «FLOOR/CARPET» position.

Parquet flooring attachment

Use attachment (27) for cleaning smooth polished parquet or laminate flooring.

Crevice nozzle

• Use the crevice nozzle (28) for cleaning radiators, crevices, spaces between couch cushions and such.

Upholstery / Upholstery Brush

The attachment (29) is intended for cleaning fabric surfaces of upholstered furniture, and for collecting dust from the surface of furniture, while the presence of lint on the brush (29) prevents damage to the polished furniture surface. Place the brush on the attachment (29) during operation.

ASSEMBLING THE VACUUM CLEANER

Attaching and removing the flexible hose

• Insert the flexible hose (7) ending (8) into the air inlet (10) until the locks (9) catch.
• To remove the flexible hose (7), press the locks (9) and detach the ending (8) from the air inlet (10).

Attaching the telescopic pipe (4) and the attachments

• Attach the telescopic extension pipe (4) to the flexible hose handle (5).
• Extend the lower part of the telescopic extension pipe (4) to the required length, having preliminarily pressed the lock (3) (pic. 2).
• Choose the necessary attachment – floor/carpet brush (1), parquet brush (27), narrow brush (28) or combined crevice nozzle (29) and attach it to the telescopic extension pipe (4).
• The crevice tool (28) and the furniture/upholstery brush (29) can be attached to the handle of the flexible hose (5).

ATTENTION

• Do not use the vacuum cleaner in places where aerosols are used or sprayed and in proximity to highly inflammable liquids, do not use the vacuum cleaner in the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting water or any other liquids; do not use it for collecting burning or smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of plaster, concrete, flour or ashes.
• Take sharp objects away from the floor before cleaning to prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases rapidly while cleaning, switch it off immediately, unplug it and check the telescopic pipe (4) or the flexible hose (7) for obstruction. Remove the obstruction, after that you can resume cleaning.

USING THE VACUUM CLEANER

The dust bin (11) is equipped with the cyclonic filter (24) which eliminates garbage and dust from the air, and the inlet filter (25) and the foam filter (26) retain the finest dust particles.

Note : provide that the filter (25) and the foam filter (26) are always clean, because the overall performance of the vacuum cleaner depends on it.

Attention!
Before switching on and using the vacuum cleaner make sure that the cyclonic filter (24), the filters (25, 26), the dust bin (11) and the outlet HEPA filter (19) are installed properly.

• Take the power plug and unwind the power cord to the required length, connect the power plug to the mains socket.
• The yellow mark on the power cord indicates the maximum cord length. Do not pull out the power cord further than the red mark.
• Press the on/off button (16) to switch the vacuum cleaner on.
• While cleaning you can control the suction power using the manual suction power control (6) on the flexible hose handle (5) or by turning the suction power control knob (17).
• After you finish cleaning, switch the vacuum cleaner off by pressing the on/off button (16) and unplug it.
• To wind the power cord, press the button (14); keep a hold of the winding cord with your hand.
• If you have to make a break during the cleaning, switch the vacuum cleaner off by pressing the button (16) and install the brush (1) to the brush storage (15).

ATTENTION

Before changing the attachments or cleaning the dust bin (11), switch the vacuum cleaner off by pressing the on/off button (16) and unplug it.

CLEANING AND MAINTENANCE

Cleaning the dust bin

• It is recommended to remove garbage and dust from the dust bin (11) after every room cleaning.
• Switch the vacuum cleaner off by pressing the on/off button (16) and unplug it.
• Hold the dust bin handle, press the clamp (13) and remove the dust bin (11) (pic. 1).
• Place the dust bin (11) over a garbage bin.
• Press the clamp (21) and open the bottom lid (20) (pic. 2).
• Remove accumulated dust and garbage from dust bin (11).
• Close the lid (25).
• Install the dust bin (11) back to its place and make sure that the dust bin (11) is fixed properly.

Cleaning the cyclonic filter (24) and the filters (25, 26) installed in the dust bin

• Preliminarily remove dust and garbage from the dust bin (11) as described above.
• Turn the lid (23) counterclockwise and remove it.
• Remove the foam filter (26), remove the inlet filter (25) and the cyclonic filter (24).
• Clean the cyclonic filter (24) from dust and garbage.
• Wash the cyclonic filter (24) under warm water jet and dry it.
• Wash the inlet filter (25) and the foam filter (26) under warm water jet and dry it.
• Do not wash the parts in a dishwashing machine.
• Dry the filter (25, 26) thoroughly.
• Do not dry the filter (25, 26) with a hairdryer or similar appliances.
• Wash the dust bin flask (22), wipe it and dry.
• Insert the cyclonic filter (24) in the flask (22).
• Insert the inlet filter (25) and the foam filter (26) into the cyclonic filter (24).
• Install the lid (23) and turn it clockwise as far as it will go.
• Install the assembled dust bin (11) back to its place, make sure that the dust bin (11) is fixed properly.

Attention

• Before assembling and installing the dust bin (11) back to its place make sure that the cyclonic filter (24), the filters (25, 26) and the flask (22) are dry.

Cleaning the outlet HEPA filter

• Switch the vacuum cleaner off and unplug the power cord plug from the mains socket.
• Remove the outlet filter grid (18) by turning it clockwise and remove the outlet HEPA filter (19) (pic. 3).
• Wash the outlet HEPA filter (19) and the grid (18) under a lukewarm water jet. Do not wash the outlet HEPA filter (19) and the grid (18) in a dishwashing machine.
• Dry the outlet HEPA filter (19) and the grid (18). Do not dry the HEPA filter (19) with a hairdryer or similar appliances.
• Install the outlet HEPA filter (19) back to its place.
• Install the grid (18) back to its place, turn the grid (18) counterclockwise as far as it will go.

Vacuum cleaner body

• Clean the vacuum cleaner’s body with a soft, slightly damp cloth, and then wipe it dry. Provide that no liquid gets inside the vacuum cleaner body.
• Do not use solvents or abrasives for cleaning the vacuum cleaner body and the attachments.
• Do not immerse the vacuum cleaner body, the power cord and the power plug into water or any other liquids.

OVERHEATING PROTECTION

• If the electric motor gets too hot during the operation, the overheating protection system will be set off.
• If during cleaning the vacuum cleaner has switched off, press the on/off button (16) and unplug the unit.
• Let the vacuum cleaner cool down for 30-40 minutes and switch it on again. The cool-down time can differ from the given value, depending on the room temperature.
• If the vacuum cleaner does not switch on, it may be caused by another malfunction. In this case apply to a service center.

STORAGE

• Before taking the vacuum cleaner away for long storage, clean the vacuum cleaner body, the dust bin (11), the cyclonic filter (24), the filters (25, 26), the dust bin flask (22) and the outlet HEPA filter (19).
• For easy storing of the vacuum cleaner, use brush storage (15).
• Keep the vacuum cleaner in a dry cool place out of reach of children and disabled persons.

DELIVERY SET

1. Vacuum cleaner with the dust bin and filters installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Floor/carpet brush – 1 pc.
5. Combined crevice nozzle – 1 pc.
6. Parquet brush – 1 pc.
7. Narrow brush – 1 pc.
8. Instruction manual – 1 pc.

SPECIFICATIONS

• Power supply: 220-240 V ~ 50/60 Hz
• Rated input power: 2000 W
• Suction power: 380 W
• Dust bin capacity: 3.5 l

RECYCLING

To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after the expiration of the service life of the unit or the batteries (if included), do not discard them with usual household waste, but take the unit and the batteries to specialized stations for further recycling. The waste generated during the recycling of the unit is subject to mandatory collection and consequent recycling in the prescribed manner. For further information about recycling of this product, apply to the local municipal administration, a household waste recycling service or to the shop where you purchased this product.

The manufacturer reserves the right to change the appearance, design and specifications not affecting the general operating principles of the unit, without prior notice.

The unit operating life is 3 years

The manufacturing date is specified in the serial number. In case of any malfunctions, promptly apply to the authorized service center.

Produced for «Ruste GmbH»,
Berggasse 18/18, 1090 Vienna, Austria т.: +7 (495) 297-50-20, e-mail: info@brayer.su

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>