MERKURY TWS207 TWS Earphone User Manual
- June 10, 2024
- Merkury
Table of Contents
MERKURY TWS207 TWS Earphone User Manual
Warning
Read the below warning thoroughly before you start using your headset. Store this manual with product packaging. The safety precaution manual reduce the risk of fire or injury when correctly complied to.
To reduce the risk of injury:
Keep batteries out of reach of children.
Do not heat, open, or dispose of battery pack in fire.
Do not allow metal objects to touch the battery on the device.
Do not expose battery pack to excessive heat.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Product Specification
- Bluetooth version: V5.3+BR+EDR
- Bluetooth decoding: SBC, AAC
- Bluetooth working frequency:2.402GHz-2.480GHz
- Frequency response:20Hz-20kHz
- Speaker size: 10mm
- Effective distance: 10m (in an ideal environment without any large obstacles)
- Earphones battery capacity: 28mAh
- Charging case battery capacity:200mAh
- Playing time: about 3-4hours (High quality music and volume may accelerate battery consumption)
Paring
1: Auto Pairing
Opening the charging case and take earphones out, and then the earphones will automatically turn on and pair. Open up Bluetooth setting on your smart device and scan for MERKURY E105T.
Operation
( Blue part is MERKURY BRAND GUIDE)
Charging Function
Fully charge the case and earphones before using for the first time.
1: Charging the charging case
There is a Type-C cable included in the packaging. Connect it to the Type-C
charging port and the other end into a USB powered source to charge your case.
2: Earphone charging
When battery is low,you will listen to a warning sign or tone. It will turn off when the earphones completely out of battery. Place the earphones into the charging case.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>