HALCYON EX380 1PSSWL Underwater LED Spot User Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON EX380 1PSSWL Underwater LED Spot
Product Information
The EX380 1PSSWL is an underwater LED spot designed for installation in swimming pools, fountains, and other water features. The luminaire is constructed with 316 STS material and has a Step tempered glass with a thickness of 7mm. It has a colour temperature of 2700k and an input voltage of 24V DC Constant Voltage (wire in parallel). The product has an Ingress Protection Rating of IP68 and can be installed to a maximum depth of 1m. The luminaire comes with a cable gland for easy installation.
PRODUCT Specifications
- Colour Temperature : 2700k
- Input Voltage : 24V DC Constant Voltage (wire in parallel)
- Ingress Protection Rating : IP68
- Max Installation Depth: 1m
- Construction Material: 316 STS
- Glass: Step tempered glass, T=7mm
Component Description
The EX380 1PSSWL comes with the following components:
- Front cover
- glass
- Bracket
- Housing
- Cable gland
Wiring Diagram
The wiring diagram for the EX380 1PSSWL is as follows:
Example of wiring:
24VDC:
Product Usage Instructions
- Ensure that the power supply is switched off before installation.
- Select a suitable location for installation. The product can be installed to a maximum depth of 1m.
- Attach the bracket to the desired location using suitable screws.
- Connect the cable gland to the luminaire housing.
- Pass the cable through the cable gland and connect it to the power supply according to the wiring diagram.
- Secure the front cover glass to the luminaire housing using screws.
- Switch on the power supply and test the product.
OUTLINE DIMENSION
NOT SUITABLE FOR USE OUTSIDE OF WATER
- To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account.
- Always try to use a Constant Voltage Driver double the luminaire circuit wattage.
- Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits.
- All cable joints must be a resin or IP68 type – NOTE: standard crimps, terminal blocks and PVC tape are not suitable cable joining methods.
- Applicable environment temperature: -20°C …. +40°C
- All installation work must be carried out by a registered electrician.
SPECIFICATIONS
Material specification.
- Housing : Molding shaped Stainless sus 316
- Bracket : Stainless steel sus 316*
- Glass : Step tempered glass, T=7mm
- Lens : Optical lens, efficiency
- Cable gland : IP—68 M16a copper with nickel—coated
- PCB :Excellent heat conductivity aluminum, coefficient of heat conductivity n. Ow/mk H07RN-F 2×1. L-3111
Electrical parameters.
Documents / Resources
|
HALCYON EX380 1PSSWL Underwater LED
Spot
[pdf] User Manual
EX380 1PSSWL Underwater LED Spot, EX380, 1PSSWL, Underwater LED Spot, LED
Spot, Spot
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>