HALCYON EX360 1BBL LED Spot Light User Manual

June 10, 2024
HALCYON

HALCYON EX360 1BBL LED Spot Light

HALCYON-EX360-1BBL-LED-Spot-Light-PRODUCT-IMG

Product Information

The EX360 1BBL LED Spot is a lighting fixture with the following specifications:

  • Color Temperature: 2700k
  • Input Voltage: 24V DC Constant Voltage (wire in parallel)
  • Ingress Protection Rating: IP65
  • Housing, bracket, gasket, reflector, and glass included
  • Uses multistrand UV-protected flex for all exterior 24V DC CV circuits
  • All cable joints must be a resin or IP68 type

Product Usage Instructions

To use the EX360 1BBL LED Spot, follow these steps:

  1. Wire the lighting fixture in parallel with a Constant Voltage Driver that is double the luminaire circuit wattage.
  2. Use multistrand UV-protected flex for all exterior 24V DC CV circuits.
  3. Ensure all cable joints are a resin or IP68 type.
  4. Note that standard crimps, terminal, and cable gauges must be taken into account to prevent voltage drop over a circuit’s total luminaire wattage.

DIMENSION

PARTS

  1. Cover
  2. Glass
  3. Gasket
  4. Fixed plate
  5. Reflector
  6. Driver
  7. Housing
  8. U type bracket
  • Color Temperature: 2700k
  • Input Voltage: 24V DC Constant Voltage (wire in parallel)
  • Ingress Protection Rating: IP65
  • To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account.
  • Always try to use a Constant Voltage Driver to double the luminaire circuit wattage.
  • Multistrand UV-protected flex should be utilized for all exterior 24V DC CV circuits.
  • All cable joints must be a resin or IP68 type –
  • NOTE: standard crimps, terminal blocks, and PVC tape are not suitable cable joining methods.
  • Applicable environment temperature: -20°C …. +40°C
  • All installation work must be carried out by a registered electrician.

WIRING DIAGRAM

Example of wiring

HALCYON-EX360-1BBL-LED-Spot-Light-FIG-3

24VDC:circuit

HALCYON-EX360-1BBL-LED-Spot-Light-FIG-4

SPECIFICATIONS

Material specifications

  • Housing: 12 Die-casting powder-coated aluminum.T=60-80um. Adhesion of ISO class 1/ASTM class 4B.
  • Bracket: Powder-coated aluminum
  • Gasket: Tooling-shaped seal
  • Reflector: Optical reflector efficiency≥90%
  • Glass: Tempered glass.T=4mm
  • LED: COB LED 5W
  • Cable gland: IP-68 PG-9 PVC
  • Power cable: H05RN-F 2×1.0mm L=2m

Electrical parameters

Item No.| Light source| Degree(°)| Input voltage(v)| Typical     operating current(mA)| Typical Consumption(w)| Typical luminance(lm)| IK rate
---|---|---|---|---|---|---|---
EX360 1BBL| 4×5W BRIDGELUX COB| 25| 24| 1279| 30.7| Cool white=1943 Warm white=1757| 09

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HALCYON User Manuals

Related Manuals