HALCYON T441 Three Circuit Track Mains Adaptor Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON T441 Three Circuit Track Mains Adaptor
Product Information
The T441 is an electrical adapter that operates on AC 220-240V with a maximum
current of 6A. It is recommended to be installed by a qualified registered
electrician to ensure safety and prevent damage.
The adapter comes with several figures (FIG-1, FIG-2, FIG-3, and FIG-4) that
show the different parts and components of the adapter. The cable must be
crimped, and the torque for the screws is\ 5-5.5kgf.cm for FIG-1 and 8MM and
3.5-4kgf.cm for FIG-4.
Note that when fixing the power cable, it is recommended to use a tool to keep
the adapter horizontally in position. After fixation, please pull the cable
with 30N to check if it’s fixed properly and then manually tighten the screws
to improve stability.
Product Usage Instructions
- Ensure that the adapter is turned off and unplugged before installing it.
- Consult a qualified registered electrician to install the adapter.
- Refer to FIG-1, FIG-2, and FIG-3 to identify the different parts of the adapter.
- Crimp the cable before fixing it to the adapter.
- When fixing the power cable, use a tool to keep the adapter horizontally in position.
- After fixing the cable, pull it with 30N to check if it’s fixed properly.
- Manually tighten the screws to improve stability. Refer to the recommended torque for each figure (5-5.5kgf.cm for FIG-1 and 8MM, and 3.5-4kgf.cm for FIG-4).
- Once the adapter is installed, plug it in and turn it on.
INSTALLATION INSTRUCTION
T441 AC 220-240V,6A MAX50N
These must be installed by a qualified Registered Electrician to prevent
damage and maintain electrical safety.`
After fixation of the power cable, please pull the cable with 30N to check
whether they’re fixed properly, then manually tighten the screws to improve
stability.