HALCYON EX330 USTSL LED Inground Instruction Manual

June 10, 2024
HALCYON

EX330 USTSL
LED INGROUND

OUTLINE DIMENSION

HALCYON EX330 USTSL LED Inground

BOM

  1. Front cover
  2. Tempered glass
  3. Reflector
  4. Housing
  5. Cable gland
  6. Power cable

Unit: mm

  • Colour Temperature: 2700k
  • Input Voltage: 24V DC Constant Voltage (wire in parallel)
  • Ingress Protection Rating: IP67
  • The mounting sleeve and luminaire must be installed over a drained substrate e.g. Scoria so that the LED luminaire is never immersed in water for extended periods (See diagrams pg2)
  • To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account.
  • Always try to use a Constant Voltage Driver which is double the total circuit wattage.
  • Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits.
  • All cable joints must be a resin or IP68 type – NOTE: standard crimps, terminal blocks and PVC tape are not suitable cable joining methods.
  • Luminaire front faces are all electropolished 316 grade Stainless Steel.
  • Applicable environment temperature: -20°C …. +40°C
  • All installation work must be carried out by a registered electrician.

EX330 USTSL
MUST BE INSTALLED OVER A DRAINED SUBSTRATE

HALCYON EX330 USTSL LED Inground - Bom

Example of wiring

HALCYON EX330 USTSL LED Inground - Bom 1.

SPECIFICATIONS

Material specifications:

Housing:| 12# die-casting grey powder coated aluminum, T=60-80um. adhesion of ISO class lASTM class
---|---
Front cover:| Stainless steel 316L#
Glass :| Tempered glass. (T=8mm)
Reflector:| Optical lens, efficiency>= 90%
Power cable :| HO5RN-F2 X 1. 0 mm2L=0. 5M (low voltage/Single color)
Mounting sleeve:| 015 PVC
Cable

gland:

| 1P68            PG-9 PVC
;lass pressure capacity:| Full area=2578kgs.
Driver:| Constant current output
LED:| Multi chip on board LED

Electrical parameters:

Item No.| Light source| Reflector,| Degree(° )| Input voltage(1)| Typical
°prating current(mA)| Typical Comsumption(w)| Typical luminance(1m)| IK rate
---|---|---|---|---|---|---|---|---
EX330 USTSL| 1 x 6W COB LED| R5| 40| 24VDC| 270| 7.| Cool white=626 Warm white=458| 9

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HALCYON User Manuals

Related Manuals