TEKA HLD 45.15 Combo Stainless Steel Oven User Manual

TEKA HLD 45.15 Combo Stainless Steel Oven

Control panel

BOTTOM CAVITY

1. Temperature control dial

2. Function control dial

3. Electronic clock/timer
   TOP CAVITY

4. Function control dial

5. Temperature control dial

Function selector symbols

HLD 45.15 Model TOP CAVITY

BOTTOM CAVITY

Oven functions

INFORMATION: For a description of how to use each of the features, see the cooking guide that comes with your oven.

CAUTION: The door must be closed when the Grill function is used.

GRILL AND LOWER ELEMENT
Ideal for roasts. This setting can be used with any size of cuts of meat.
CONVENTIONAL WITH FAN
Suitable for roasts and baking. The fan spreads the heat evenly throughout the inside of the oven to reduce cooking time and temperature.
GRILL
Toasting and browning. This setting allows the surface to be browned without affecting the in-side of the food. Suitable for flat foods such as steaks, ribs, fish and open toasted sandwiches
LOWER ELEMENT
Heat only comes from the lower part. Suitable for warming dishes or letting dough or similar products rise.
DEFROSTING
This function is suitable for slowly defrosting food. In particular those that are consumed without the need for heating, for example creams, pastries, cakes, pies etc
PIZZA
Suitable for pizzas, following the cooking table in the instruction manual.
TOAST
Suitable for making toast using only the grid provided. Suitable for roasting cuts of meat. When roasting meat, fish and vegtables, we recommend using this function with the drip tray.
MELTED CHEESE TOPPINGS
Heat only comes from the upper part. Suitable for toasting and browning.
WARMING
Heat only comes from the lower part. Suitable for warming plates and defrosting food.

Using the Oven

The touch control sensitivity continuously adapts to the ambient conditions. Make sure the glass surface of the control panel is clean and free of obstacles when plugging in the oven. If the clock does not respond correctly when you touch the glass, unplug the oven for a few seconds and then plug it in again. Doing this causes the sensors to adjust automatically so that they will react once more to fingertip control.

ELECTRONIC CLOCK/TIMER SETTINGS

• Symbol: lights up when the clock/timer is selected.
• Symbol: lights up to indicate that the oven is programmed.
• AUTO Symbol: indicates that the oven is trans-mitting heat to the food.
• + / – Sensors: enable you to select a time. programme the electronic clock/timer functions.
• Sensor: enables you to change visible information and select clock/timer settings between the top and bottom cavities
• Symbols: Lights up when the top cavity is chosen.
• Symbols: lights up when the bottom cavity is chosen

SETTING THE TIME

• When you plug in the oven, you will see the clock flashing 12:00.
• Set the clock by touching the + or – sensor. You will hear 2 beeps confirming that the time has been set.
• To change the time, touch the + and – symbols together until the indicated time flashes on the display. Change the time by pressing the + or – sensors. Two beeps will then confirm that the new time has been set.

NOTE: The clock light has a night mode so the dis-play light will dim between 00:00 and 6:00 hours.

MANUAL OPERATION

• After setting the clock, the oven is ready for use. Select a cooking function and temperature.
•  The symbols will light up depending on the top and bottom cavity functions.
• During cooking, the symbol will light up to indicate that heat is being transmitted to the food.
• This symbol disappears when the selected temperature has been reached.
• Set the controls to to turn off the oven.

Electronic Clock/Timer settings

• Timer alarm: The alarm will go off at the programmed time, even if the oven is not in use.
• Cooking Time (top and bottom cavity): This function allows you to programme the cooking time, after which the oven will turn off automatically.
• Cooking stop Time (top cavity only): This setting allows you to programme the time for cooking to stop, after which the oven will turn off automatically.
• Cooking Time and Cooking stop Time (top cavity only): This setting allows you to programme the cooking time and cooking stop time. The oven switches on automatically at the set time and operates for the selected cooking time (Cooking Time). It then switches off automatically at the indicated time (Cooking Stop Time).

programming THE Timer alarm

1. Touch the sensor with your fingertip until the symbol starts flashing on the display. The clock will also flash 00:00.
2.  Select the time after which you want the alarm to sound by pressing the + or – sensor.
3. You will hear 2 beeps to confirm that the time has been set. The clock will start counting down from the selected time and the symbol will flash slowly.
4. When the time is up, the alarm will go off and the symbol will flash quickly.
5. Touch any sensor to stop the alarm. The symbol will then disappear. If you want to change the timer alarm, simply touch the sensor with your fingertip and then press the + or – sensor. You will hear 2 beeps to confirm that the time has been changed. The clock will then start counting down from the new time and the symbol will flash slowly.

NOTE: You cannot see the current time on the dis-play when the timer alarm is set.

PROGRAMMING COOKING TIME FOR THE TOP CAVITY

1. Touch the sensor with your fingertip until the AUTO symbol starts to flash and 00:00 appears on the display.
2. Select the cooking time by pressing the + or – sensor.
3. You will hear 2 beeps, the AUTO symbol will flash slowly and the display will show the time left before the oven switches off automatically.
4.  Select a cooking function and temperature.
5.  Once the cooking time is up, the oven will turn off, an alarm will sound and the AUTO symbol will flash quickly.
6.  Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will switch on again.
7. Set the controls to to turn off the oven.

You can change the remaining cooking time at any time by touching the sensor with your fingertip until the AUTO symbol starts to flash quickly. Now press the

• or – sensor to change the time.

PROGRAMMING COOKING TIME FOR THE BOTTOM CAVITY

The oven incorporates pre-programmed set-tings for the bottom cavity cooking functions. You can modify these times using the + or – sensors to select the desired duration.

1. Pizza Function: select the Pizza setting in the function control dial and the maximum temperature on the bottom cavity temperature control dial. A pre-programmed time of 8 min will appear on the clock/timer display. Use the + or – sensors to modify the cooking time according to your liking or the instructions that came with the pizza.
2. Toast Function: select the Toast setting on the bottom cavity function control dial and the maximum temperature on the bottom cavity temperature control dial. A pre-programmed time of 3.5 min will appear on the clock/timer display. Use the + or – symbols to change the cooking time according to your liking.
3. Melted Cheese Topping Function: select the Melted Cheese Topping setting on the top cavity function control dial and the maximum temperature on the bottom cavity temperature control dial. A pre-programmed time of 6 min will appear on the clock/timer display. Use the + or – symbols to change the cooking time according to your liking.
4.  For all the above settings, once the cooking time is up, the oven will turn off, an alarm will sound and the AUTO symbol will flash quickly.
5. Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will switch on again.
6. Warming Function: select the Warming set-ting on the top cavity function control dial and a maximum temperature of 90º on the bottom cavity temperature dial. A pre-programmed time of 8 min will appear on the clock/timer display. After this preheating time, an alarm will sound and the oven will turn off. Touch any sensor to stop the signal. The oven will turn on again. Place plates in the cavity to keep them warm for as long as you wish.
7. Set the controls to to turn off the oven.

You can change the cooking time at any time by pressing on the + or – sensors.

PROGRAMMING THE COOKING STOP TIME

1. sensor with your fingertip until the AUTO symbol starts to flash.
2. Select the cooking stop time by pressing the + or – sensor.
3. You will hear 2 beeps, the display will show the current time and the AUTO symbol will flash slowly to indicate that the oven will switch off automatically.
4. Select a cooking function and temperature.
5. When the cooking time is up, the oven will turn off, an alarm will sound and the AUTO symbol will flash quickly.
6. Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will switch on again.
7. Set the controls to to turn off the oven.

You can change the stop cooking time at any time by touching the sensor with your finger-tip until the AUTO symbol starts to flash quickly and you see the stop time on the display. Now press the + or – sensor to change the time.

PROGRAMMING COOKING TIME AND COOKING STOP TIME

1.  Touch the sensor with your fingertip until the AUTO symbol starts to flash and 00:00
2. Select the cooking time by pressing the + or – sensor.
3. You will hear 2 beeps, the display will show the remaining cooking time, and the AUTO symbol will flash slowly.
4.  Touch the sensor until the AUTO symbol starts to flash quickly. The display will show the current time and the programmed cooking time.
5. Select the cooking stop time by pressing the + or – sensor.
6. This will be confirmed by two beeps. The current time will show on the display and the AUTO symbol will remain lit.
7. Select a cooking function and temperature.
8. The oven will remain off and the AUTO light will be on. The oven is now programmed.
9. When it is time to start cooking, the oven will turn on and will operate for the programmed cooking time.
10. While cooking, the display will show the cooking time remaining and the AUTO symbol will flash slowly.
11. When the cooking time is up, the oven will turn off, an alarm will sound, and the AUTO symbol will flash quickly.
12. Touch any sensor to stop the alarm and to turn off the AUTO symbol. The oven will switch on again.
13. Set the controls to to turn off the oven.

If you want to change the remaining cooking time while the oven is on, press the sensor until the AUTO symbol starts to flash quickly. Now press the + or – sensor to change the time.

CHILD SAFETY FUNCTION

This function can be selected at any time while using the oven. To activate the function, press the + and – sensors at the same time for several seconds. You will hear a beep and see the word SAFE on the display. The clock/timer is locked. If the oven is off and you activate the child safety function, the oven will not work even if a cooking function is selected. If this function is activated while you are cooking, it will only lock the electronic clock/timer settings. If any clock/timer sensor is touched while the child safety function is on, the word SAFE will appear on the display. The clock/timer is locked. To disable the function, press the + and – sensors at the same time for several seconds until you hear a beep.

CAUTION: In the event of a power failure, your electronic clock/timer settings will be erased and 12:00 will flash on the clock display. Reset it and programme again.

References

• Teka | Cook your way to life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>