WatchGuard AP332CR Secure Wireless Access Point User Guide

: June 10, 2024
: Watchguard

Table of Contents

WatchGuard AP332CR Secure Wireless Access Point
Product Information
Product Usage Instructions
WHAT’S IN THE BOX
INSTALLATION INSTRUCTION
MOUNT THE AP
POWER REQUIREMENTS
CONFIGURE AND TROUBLESHOOT THE AP
Declaration of Conformity
WATCHGUARD TECHNICAL SUPPORT
Documents / Resources

WatchGuard AP332CR Secure Wireless Access Point

WatchGuard-AP332CR-Secure-Wireless-Access-Point-
PRODUCT

Product Information

The AP332CR is an 802.11 a/b/g/n/ac/ax Access Point manufactured by WatchGuard Technologies. It has four antennas (2 x 2.4GHz, 2 x 5GHz) and can be mounted on a wall or pole. The device requires PoE+ (802.3at) power and can be configured and troubleshooter through the WatchGuard Cloud. The AP332CR meets strict safety requirements and has various safety approvals, global compliance standards, and certifications. More information about these can be found on the WatchGuard website.

Product Usage Instructions

Activate your AP by going to watchguard.com/start
Mount the AP using the provided mounting bracket, mounting screws, pole mount straps, and ground cable and screw. Choose either wall mount or pole mount depending on your preference.
Connect the AP to your network by plugging one end of an Ethernet cable from your network into the LAN (PoE) port on the bottom of the AP. Make sure the other end of the Ethernet cable is connected to your network through a hub, switch, or injector with PoE+ (802.3at) power enabled.
Configure and troubleshoot the AP by going to watchguard.com/start.
Make sure the power source is connected to the earth’s ground before you connect power to the AP to meet safety and electromagnetic interference (EMI) requirements.

WHAT’S IN THE BOX

INSTALLATION INSTRUCTION

ACTIVATE YOUR AP
- GO TO: watchguard.com/start
- Activate Products
- Enter the Serial or License Key
- To activate a new device. type the serial number exactly ‘s it appears ‘include any hyphens). You can find the serial number on a label on your device or on the fulfillment email for the virtual device.
- To activate an add-on license, service, or renewal, type the license key from our fulfillment email or online store receipt,

MOUNT THE AP

WALL MOUNT

POLE MOUNT

CONNECT THE AP

Plug one end of the Ethernet cable from your network into the LAN (PoE) port on the bottom of the AP.
Make sure the other end of the Ethernet cable is connected to your network through a hub, switch, or injector with PoE+ (802.3at) power enabled.

POWER REQUIREMENTS

PoE+ (802.3at) (54V DC, 0.6A)

Power Options

WG8602 (AU), WG8601 (UK), WG8600 (EU), WG8599 (US)
- WatchGuard 802.3at PoE+ Injector with AC cord

CONFIGURE AND TROUBLESHOOT THE AP

GO TO:watchguard.com/start

NOTICES:

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Please read these instructions carefully before operating the product, and refer to them as needed to ensure the continued safe operation of your product.
Additional information, including a full list of safety approvals, global compliance standards, and certifications can be found in the Hardware Guide for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
For patent information, please visit http://www.watchguard.com/patents

Safety Warning

If protective earthing is used as a safeguard, the instructions shall require the connection of the equipment protective earthing conductor to the installation protective earthing conductor (for example, by means of a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic interference (EMI) requirements, you must make sure the power source is connected to earth ground before you connect power to the AP.
To protect your outdoor AP from electrical events, we recommend you ground the AP with the included ground wire based on your local regulations.

Declaration of Conformity

WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration. Product (s):
802.11 a/b/g/n/ac/ax Access Point, AP332CR EU Directive(s):
Low Voltage (2014/35/EU)
Electromagnetic Compatibility (2014/30/EU)
Energy-related Products (2009/125/EC)
RoHS (2011/65/EU and 2015/863/EU RoHS)
WEEE Directive 2012/19/EU
The Radio Equipment Directive (2014/53/EU) Common Standard(s):
EN 62368-1:2014+A11:2017 Safety for ITE
EN 55032:2015+A11:2020
EN 55035: 2017/A11:2020
EN 61000-3-2:2019 Harmonics
EN 61000-3-3:2013+A1:2019 Flicker
Wireless Standard(s):
EN 62311:2008
EN 301 489-1 v2.2.3 (2019-11) EMC and Radio Spectrum Matters
EN 301 489-17 v3.2.4 (2020-09) EMC and Radio Spectrum Matters
EN 300 328 v2.2.2 (2019-07) Radio Spectrum Matters
EN 301 893 v2.1.1 (2017-05) Broadband Radio Access Networks
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
Manufacturer / Hersteller: WatchGuard Technologies 505 5th Ave South, Suite 500, Seattle, WA 98104 USA
Radio Equipment / : 802.11 a/b/g/n/ac/ax Access Point
Type Designation / AP332CR
Specifications /802.11a,b,g,n,ac, ax (2.4Ghz & 5GHz)
Intended Purpose /Outdoor access point
Equipment Class / Klasse: Class II
Operating temperature -20° C to 60° C
The above device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU when used for its intended purpose. This equipment may be operated in the USA, Canada, & Europe Union.
Warning! This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Signature
Full Name: Laurence Huang
Position: Hardware Program Manager

WATCHGUARD TECHNICAL SUPPORT

1.877.232.3531
(U.S. and Canada)
+1.206.613.0456
(all other countries)
www.watchguard.com/support
ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES: 1.800.734.9905
INTERNATIONAL SALES: +1.206.613.0895
WEB:www.watchguard.com
© 2022 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-4332-001 Rev B 110322

Documents / Resources

| WatchGuard AP332CR Secure Wireless Access Point [pdf] User Guide
AP332CR, AP332CR Access Point, Access Point, AP332CR Secure Wireless Access Point, Secure Wireless Access Point
---|---