Ultra Easy Health Technology Q31 smart watch User Manual
- June 10, 2024
- Ultra Easy Health Technology
Table of Contents
Easy Health Technology Q31 smart watch
User Manual
Product Introduction
Please read this operation guide carefully before using the watch and keep it
properly
Note:
Product pictures such as products, accessories, user interfaces shown on the
operation guide are for illustration purpose only and actual product may vary
due to product update and enhancement.
Wearing
Wear your watch one finger from the wrist bone and adjust the strap tightness
to ensure the heart rate sensor collects data properly.
Note:
Too loose wearing may affect the accuracy of heart rate monitoring data.
Connection
Scan OR code or search “GloryFit” in AppStore (IOS) or Google Play (Android) to download and install the app  User can set personal information on the
mobile phone )
Switch to “Device” screen and click to bind the device )
Click your device on the scanning list
Bind successfully
Using
Screen Operation
- Enable shortcut menu.
- Enable message notifications.
- Switch functional card.
- Enter functional menu.
- Return to the last level.
- Select other watch face setting.
Recharging
When the watch indicates that battery is low, please charge it promptly.
The watch is magnetic charging. Please match the charging pins of the charging
cable to the watch’s charging port until the watch screen shows the recharging
reminder.
- Please use the exclusive charging cable to charge. The charging way is unidirectional, so please pay attention to the charging direction, correct charging will absorb, while wrong direction will repel, please do not force charging.
- When charging, to ensure stable charging, the watch screen will be off and users can click the button to wake up the screen. When the watch power is too low, it will take 3 to 5 minutes to charge before waking up the watch, which is normal. Please wait for 5 minutes and then check the watch charging status.
- Please connect charging socket to power adapter (5V/0.5A) or PC with USB cable.
Strap adjustment and disassembly
Strap adjustment
Adjust the watch buckle according to your wrist to ensure the strap and watch
cling to your wrist.
Strap disassembly and assembly
- Pull the buckle of the strap and lift the strap te remove it.
- Insert one side of the strap into the lugs, pull the buckle of the strap, align the other side with the lugs and release the buckle, then the strap is fitted with a click.
- Pull and tug the strap to ensure it is well-installed.
Warnings
FCC Caution This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference toradio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Safety Information
Electronic device:
Please do not use this device in places where the use of wireless devices is
expressly prohibited, as this may interfere with other electronic devices or
cause other hazards.
Flammable and explosive area:
Do not use the device in any flammable or explosive areas such a s petrol
station (service station) or near flammable chemicals, and observe all graphic
or written instructions. This device may cause explosion or fire in or around
storage and transport areas of fuel and chemicals or explosive sites.
Operation Environment:
- Do not use the device in humid o r near magnetic places as it may cause the internal circuit malfunction of the device.
- Do not use the device during thunderstorm which may lead to device failure or electric shocks.
- Use this device within the temperature range of -20°C ~45’C . When the ambient temperature is tao high or too low, it may cause device to malfunction.
- Do not place the device in direct sunlight, such as car dashboard or window ledge.
- Do not place the device near heat source or naked flames, such a selectric heaters, microwave ovens, ovens, water heaters, candles and other places where high temperature may be generated.
Water and dust resistant:
This device shows water-resistant and dust-proof performance under specific
environments after being tested.
Children Health:
- This device and its accessories may contain some small parts, please keep the device and its accessories out of the reach of children. Children may inadvertently damage this device and its accessories, or swallow small part that may result in a gastric shock or other hazards.
- This device is not a toy and children should use it under the supervision of an adult.
Data Security:
Using unauthorized third party software to upgrade your device’s firmware and
system may cause the device to malfunction or lead to the security risks such
as leaking your personal information. It is recommended to use online upgrade
o r consult official customer service for the upgrade.
Limitation of Liability
Disclaimer of Liability:
The contents of this manual are provided by “as is” and, except as required
by applicable laws, Ultra Easy Health Technology (Guangzhou) Co., Ltd, does
not disclaim any expressed or implied warranties, including but not limit to
warranties to marketability or fitness for a particular purpose with respect
to the contents of this manual.
To the extent permitted by applicable laws, Ultra Easy Health Technology
(Guangzhou) Co., Ltd , shall in not event be liable for any special,
incidental, indirect or consequential damages, nor for any loss of profit,
data or anticipated savings, arising out of the use of the relevant contents
of this manual, and the product described in this manual.
To the extent permitted by relevant laws, in any event, the maximum liability
of Ultra Easy Health Technology (Guangzhou) Co., Ltd for damages arising from
using the product described in this manual (except for damages under
applicable law in cases involving personal injury) is limited to the product
price paid by you.
Warranty Service
Warranty Notice:
-
In normal use, if there are product quality problems caused by manufacturing, materials, design, etc. one year free warranty for the motherboard and six months warranty for the battery and charger from the date of purchase.
No free warranty will be provided for failures caused by user’s personal reasons, as follows: Failures caused by unauthorized disassembly and modification of the watch.
Failures caused by dropping while use.
All man-made damage or damage caused by third party’s negligence or misuse (e.g. water in the body, external shocks, scratches on peripheral parts, etc.) is not covered by the warranty. -
When requesting a free warranty, please provide warranty card with the date of purchase date and the seal of the purchase store.
-
When repairing the product, the user should take the product to our company or to our distribution site.
-
All functions of the product are based on the actual product.
Basic Parameters
- Product name: smartwatch
- Product model: Q31
- Display screen size: 1.43 Amoled
- Resolution: 466*466
- Battery capacity: 300mAh
- Standby time: 5-15 days
- Product weight: about 52g
- Working environment: 0°C ~45°C
- Product size: 52.54611.3mm
- Wristband material: silicon
- Master control chip: single chip, dual mode
- Bluetooth: Bluetooth BLE5.2+BT3.0
- Compatible system: Android5.0+10S9.0
- Packing list : device, charging cable and User Manual
Three-guarantee Service
Three-guarantee Service
Customer Data|
Model| | Sales Store| | Customer Phone|
Contact Phone| | Sales Phone| | Purchase Date|
Customer Address|
Sales Address|
Abstract| Date
Failure Phenomenon| | Qualified
Inspection & Repair|
Remark|
Precautions
Note:
-
It is forbidden to use a power adapter with a charging voltage greater than 5V anda charging current greater than 2A. Charging hour is 2 to 3 hours.
-
Itis forbidden to charge in the presence of water damage.
-
This device is not for medical use, the data and information provided are for reference only.
-
Do not use this device in places where the use of wireless devices is expressly prohibited, as this may interfere with other electronic devices or cause other hazards.
-
Do not place the device in direct sunlight, such as car dashboard or window ledge.
-
Do not place the device near heat source or naked flames, such as induction cookers, microwave ovens, ovens, water heaters, fires, candles and other places where high
temperature may be generated. -
Do not allow children or petste swallow the device or its accessories, a s this may cause injury to them or lead to device failure.
-
This device is not a toy and children should use it under the supervision of an adult.
-
This device is equipped with a non-removable built-in battery, please do not replace the battery by yourself.
Product name: smartwatch
Product model: Q31
Wireless connection: Bluetooth BLE5.2+BT3.0
Manufacturer : Ultra Easy Health Technology (Guangzhou) Co., Ltd
Office address:228 Huadi Avenue Middle, Liwan District, Guangzhou China 51000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>