NETGEAR Orbi 4G LTE Router LBR20 Instructions
- June 7, 2024
- NETGEAR
Table of Contents
NETGEAR Orbi 4G LTE Router (LBR20) FIRMWARE
upgrade Instruction
New Firmware Version – PAR01A06M4G
Release Date: February 9, 2021
NOTE 1: It is highly recommended that you frequently check for new
firmware versions and upgrade your Orbi 4G LTE Router for optimal performance
when updates are available.
NOTE 2: To install the 4G LTE FIRMWARE upgrade, you need to:
- Connect your computer or phone to your Orbi 4G LTE Router
- Ensure internet connectivity is established
- Log in via the router Graphical User Interface (GUI)
- Follow the steps outlined below.
NOTE 3: You may also see the new Orbi FIRMWARE (version 2.5.3.4) with the
LTE FIRMWARE update. If you do, please update Orbi FIRMWARE to 2.5.3.4 first,
then update the LTE FIRMWARE.
NOTE 4: The Orbi Mobile Application does not currently support LTE
FIRMWARE updates. Firmware updates must be made via the Graphical User
Interface (GUI)
Orbi LTE FIRMWARE update via GUI
-
With your computer or phone, please connect to your Orbi 4G LTE Router, and launch a web browser.
-
Please visit ‘orbilogin.net’ or ‘orbilogin.com’. You will see the following pop-up:
Try http://192.168.1.1 if you can’t open the page correctly. -
For Username, please enter “ admin ”, and for the password, please enter the unique password you have selected during your initial installation.
a) Any available update will be notified via the top banner.
Click the banner to be directed to the FIRMWARE update page.
b)
Alternatively, you can check and update from the menu below.
(Advanced -> Administration -> Firmware Update -> LTE Update)
c) Click ‘Check’ to initiate a search for the newest FIRMWARE available, and it will begin downloading the FIRMWARE image.
d)
Click ‘YES’ to start installing the FIRMWARE image. The upgrade process will
take up to 12 minutes to complete, including a system reboot when done.
Post Update
Once the firmware upgrade process has been completed, log back into your Orbi
4G LTE Router to verify that the Current Firmware Version was applied.
(Advanced Home -> scroll down and check ‘Mobile Info’ section)
The LTE module’s (EG-18NA) current version should appear as PAR01A06M4G.
Congratulations. Your Orbi 4G LTE Router has now been updated. You may close the GUI and disconnect your computer from the Orbi 4G LTE Router.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>