HALCYON U972 B3 LED Wall Light Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON U972 B3 LED Wall Light
Product parameter
| Model No. | Voltage | Power | Color | Size(LWH):mm | Material | IP Grade |
|---|---|---|---|---|---|---|
| U972 B3 | 220-240VAC | 42W | 3000K | 43212045 | AL | IP 65 |
| U972 W3 | 220-240VAC | 42W | 3000K | 43212045 | AL | IP 65 |
Symbols
SAFETY INSTRUCTIONS
Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance. Install as described.
Installation Instructions
Designed for Interior & Exterior use.
Take pride in the installation. For exterior installation adhesive foam pad
must be used and cable entry gland/screw heads must be covered in silicone
sealant. Ensure the installation surface is even so that luminaire housing can
be correctly seated against the internal gasket without obstruction when
tightened into place. Failure to do so may cause luminaire failure from water
ingress.
- Modification or misuse of the luminaire voids the warranty.
- Do not connect the luminaire to the live power source.
- Take care during installation, incorrect connection may damage the luminaire resulting in a reduced lifespan.
- Halcyon Lighting is free to change the design specifications and instructions for the assembly of the luminaire without notice.
- Halcyon Exterior products go through extensive waterproof testing prior to sale.
- All exterior luminaires (with the exception of copper) require periodic cleaning to protect the surface and/or coating from corrosion and ensure a tidy appearance for the lifespan of the product.
Wash with care using a soft brush and warm soapy water using a neutral detergent. Coastal areas require extra attention, especially fittings that are under eaves/soffits and do not have any exposure to rain. Do not use a water blaster or high-pressure hose, do not submerge fittings for extended periods of lime. 316 stainless steel fittings will still develop surface rust or “tea staining” if left uncared for.