DOOGEE T30 Pro Tablet User Manual
- June 10, 2024
- DOOGEE
Table of Contents
DOOGEE T30 Pro Tablet
Product Information
The T30 Series is a tablet device with several features and components. It has two speakers, a power button, a restart button, a volume button, a main microphone, a front camera, a light sensor, a charging indicator, a 3.5 headphone jack, a SIM/TF card slot, a Type-C port, a DOCKING interface, two microphones (main and secondary), a main camera, and a flash. The device also requires a Nano SIM card or Nano SIM card and TF card for calling functionality.
Product Usage Instructions
- To install the SIM card:
- Press the card pin into the side hole.
- The card tray pops up and pull it out.
- Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down.
- Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
- With the pad facing up, insert the card holder into the pad in the direction of the arrow.
- For safety reasons:
- Keep the pad at least 15 cm away from any medical implant or rhythm adjuster.
- Do not put the device in your coat pocket.
- Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- Use only approved or compatible power sources to avoid hazards.
- Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage.
- Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- For maintenance:
- Follow the instructions in the manual to open the pad and disassemble the accessories.
- Avoid falling, knocking, or shaking your pad to prevent screen rupture, damage to the internal circuit board, and delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, soft cloth (e.g., camera lens) and display.
- If you encounter an abnormal image such as a crash during use:
- For a pad that cannot remove the battery, press and hold the power button for more than 12 seconds. The pad will be forced to restart (unlock the pad when restarting) to solve the general bug.
- For the pad that can remove the battery, remove the battery, then insert the battery and restart it to solve the bug.
Overview
- Speaker
- Speaker
- Power Button
- Restart Button
- Volume Button
- Main Microphone
- Front Camera
- Light Sensor
- Charging Indicator
- 3.5 Headphone Jack
- Speaker
- SIM/TF Card
- Type-C Port
- Speaker
- DOCKING Interface
- Secondary Microphone
- Secondary Microphone
- Main Camera
- Flash
How to insert the card
To make sure your pad be able to call, put the SIM card in the following order.
- Press the card pin into the side hole and then the card tray pops up and pull out it.
- Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
- With the pad facing up, insert the cardholder into the pad in the direction of the arrow.
How to boot
- Non-removable battery
- Press the power button for 3-5 seconds to boot.
How to send SMS, MMS
SMS
- Open the SMS app
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS-video
- • When writing a text message
- • Select images, videos or other files you want to add, even
- You can take a new picture or video right away.
- Selecting or sending
Language switching settings
- Main menu-settings-system setting– language and input method
- Language and input method-language–language adding
- Select the language you need, the system will automatically jump back to the language interface
- Select the icon after the language bar and drag it to the first one.
SAR
- The maximum electromagnetic radiation absorption ratio (SAR) of this product is s:2.0W/kg.
- In line with the requirements of the national standard GB 21288-2007.
Safety
In order to ensure safe using the product, you must strictly abide by the following rules
- The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with the high or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters.
- Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
- If the device is equipped with a non-removable battery, battery or device.
- Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
- Do not disassemble or reset the battery, insert other objects, or immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
- The company does not the responsibility for accidents caused by non-standard related charging equipment.
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and eectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
- Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
- Clean the lens with a clean, dry, soft cloth.
- ( Example: camera lens) and display.
- If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting) It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
FCC STATEMENT
FCC 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
FCC 15.21
_ Warning: _Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC 15.105
For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information
This Tablet meets the government’s requirements for exposure to radio waves. The guide lines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Tablet (FCC ID: 2AX4YT30PRO) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification is 0.781W/Kg(1g) for body when properly worn on the body. This device was tested for typical body-worn operations with the back of the Tablet kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the Tablet. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided very high volume, prolonged listening to a mobile phone can damage your hearing.
Scan the QR code for more function information
This user manual is for reference only. The specific functions and product pictures may be slightly different from the actual ones. Please prevail in kind.
- Fb: DOOGEE mobile
- TWITTER: DCXlGEE_official