KENDALL HOWARD 1915-3-100-08 8U Security Wall Mount Cabinet Instruction Manual
- June 10, 2024
- KENDALL HOWARD
Table of Contents
KENDALL HOWARD 1915-3-100-08 8U Security Wall Mount Cabinet
Product Information
8U Security Wall Mount Cabinet
The 8U Security Wall Mount Cabinet is a wall-mounted cabinet that can be used to store and secure various equipment such as servers, routers, switches, and other networking devices. It comes with keyhole mounting holes that are 16 inches on center and can be mounted with appropriate wall mount anchors or fasteners according to the walls requirements. The cabinet is equipped with additional mounting holes inside the cabinet to secure it to the wall.
Support
For any support required, customers can reach out to Kendall Howard through the following methods:
- Phone: 651.213.1333 (8:00 AM to 5:00 PM CST)
- Email: customerservice@kendallhoward.com
- Mail: 10152 Liberty Lane, Chisago City, MN 55013
- Web: www.kendallhoward.com
Tools Needed
The following tools are needed for installation:
- Phillips Screwdriver or Cordless Drill
- Level
Product Warranty
Kendall Howard offers a Limited Warranty against defects in material and workmanship for all users of their products. The warranty extends to the first purchaser for use and is not transferable or assignable without prior written permission from Kendall Howard.
Product Usage Instructions
Please follow the below steps for the installation of the 8U Security Wall Mount Cabinet:
Step 1
Identify the location where the cabinet needs to be installed. The cabinet must be hung with the appropriate wall mount anchors or fasteners according to the requirements of the wall. Each cabinet is equipped with keyhole mounting holes that are 16 inches on the center. Install two initial mounting screws into the wall.
Step 2
Hang the cabinet on the two mounting screws installed in step 1. Secure the cabinet to the wall with the additional mounting holes inside the cabinet. Once the cabinet is securely mounted, it can be used to store and secure various pieces of equipment.
Disclaimer
DISCLAIMER: Kendall Howard LLC. endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representations or warranties of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy, or reliability of the information contained herein or that said information covers all details, conditions, or variations. The information herein does not provide for every possible contingency in connection with the installation or use of the product(s). The information contained in this document is subject to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness, or reliability of the information contained in this document. Any reliance placed on the information is therefore strictly at your own risk.
Tools Needed
- Phillips Screwdriver or Cordless Drill, Level
Installation Instructions
Step 1
Identify cabinet location. The cabinet must be hung with the appropriate wall
mount anchors of fasteners according to the requirements of the wall. Each
cabinet is equipped with keyhole mounting holes. Mounting holes are 16” on the
center. Install two initial mounting screws into the wall.
Step 2
Hang the cabinet on the two mounting screws installed in step 1. Secure the
cabinet to the wall with the additional mounting holes inside the cabinet.
Warranty
GENERAL: Kendall Howard offers all users of our products the following
Limited Warranty against defects in material and workmanship. Please read your
warranty
carefully. This Warranty sets forth our responsibilities in the unlikely event
of a defect and tells you how to obtain a resolution. TERMS OF WARRANTY:
Kendall Howard products are warranted to be free of defects in material and
workmanship. If any part or portion of the Kendall Howard product fails to
conform to the Warranty, Kendall Howard, at its option, will furnish new or
factory-remanufactured products for repair or replacement of that part.
WARRANTY EXTENDS TO FIRST PURCHASER FOR USE, NON-TRANSFERABLE: This Warranty
is extended to the first person, firm, association, or corporation for whom
the Kendall Howard product specified herein is originally sold for use in the
United States (the “User”). This Warranty is not transferable or assignable
without the prior written permission of Kendall Howard.
ASSIGNMENT OF WARRANTIES: Kendall Howard assigns to User any warranties
which are made by manufacturers and suppliers of components of the Kendall
Howard products and which are assignable, but Kendall Howard makes NO
REPRESENTATIONS as to the effectiveness or extent of such warranties, assumes
NO RESPONSIBILITY for any matters which may be warranted by such manufacturers
or suppliers and extends no coverage under this Warranty to such components.
DRAWINGS, DESCRIPTIONS: Kendall Howard warrants for the period and on the
terms of the warranty set forth herein that the Kendall Howard product will
conform to the descriptions contained in Kendall Howard final invoices,
orders, proposals (as modified), and other Kendall Howard descriptive
documents (“Descriptions”). Kendall Howard does not control the use of any
Kendall Howard product. Accordingly, it is understood that the Descriptions
are NOT WARRANTIES OF PERFORMANCE and NOT WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE.
WARRANTY CLAIMS PROCEDURE: Within a reasonable time, but in no case to
exceed thirty (30) days, after User discovers a defect, User shall contact
Kendall
Howard. Subject to the limitations specified herein, a Kendall Howard customer
service representative will repair or replace the non-conforming Kendall
Howard product warranted hereunder, without charge for materials. User will
not be charged for labor if performed within thirty (30) days of product
purchase. In all other instances, the User will be charged for labor performed
at Kendall Howard’s then-current rates. Kendall Howard shall assume shipping
costs for replacement products and return of the defective product to Kendall
Howard. Warranty coverage will be extended only after Kendall Howard’s
inspection determines there is a defect as claimed and shows no signs of
treatment or use which would void the coverage of this Warranty.
WARRANTY PERFORMANCE OF COMPONENT MANUFACTURERS: It is Kendall Howard’s
practice, consistent with its desire to remedy Warranty defects most promptly
and effectively possible, to cooperate with and utilize the services of
component manufacturers and their authorized representatives in the
performance of work to correct defects in Kendall Howard components.
Accordingly, Kendall Howard may utilize third parties in the performance of
Warranty work, including repair or replacement hereunder, where, in Kendall
Howard’s opinion, such work can be performed in less time, and with less
expense.
ITEMS NOT COVERED BY WARRANTY: THIS WARRANTY DOES NOT COVER DAMAGE OR
DEFECT CAUSED BY misuse, improper application, wrong or inadequate electrical
current or connection, negligence, inappropriate on-site operating conditions,
repair by non-Kendall Howard designated personnel, accident in
transit,tampering, alterations, a change in location or operating use,
exposure to the elements, Acts of God, theft or installation contrary to
Kendall Howard’s recommendations or specifications, or in any event if the
Kendall Howard serial number has been altered, defaced, or removed. THIS
WARRANTY DOES NOT COVER installation costs, external circuit breaker resetting
or maintenance or service items, and further, except as may be specifically
provided for herein, does NOT include labor or shipping costs arising from the
repair or replacement of the Kendall Howard product, or any part thereof, or
charges to remove same from any premises of User. THIS WARRANTY IS VOID if the
User alters the product in any way.
LIMITATIONS: THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE USER’S SOLE AND EXCLUSIVE REMEDY IS THE REPAIR OR
REPLACEMENT OF THE KENDALL HOWARD PRODUCT AS SET FORTH HEREIN. IF THE USER’S
REMEDY IS DEEMED TO FAIL OF ITS ESSENTIAL PURPOSE BY A COURT OF COMPETENT
JURISDICTION, KENDALL HOWARD’S RESPONSIBILITY FOR PROPERTY LOSS OR DAMAGE
SHALL NOT EXCEED ONE TIMES THE NET PRODUCT PURCHASE PRICE. IN NO EVENT SHALL
KENDALL HOWARD ASSUME ANY LIABILITY FOR INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER, INCLUDING WITHOUT
LIMITATION LOST PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, WHETHER ANY CLAIM IS BASED UPON
THEORIES OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, TORT, OR OTHERWISE.
MISCELLANEOUS: NO SALESPERSON, EMPLOYEE, OR AGENT OF KENDALL HOWARD IS AUTHORIZED TO ADD TO OR VARY THE TERMS OF THIS WARRANTY. Warranty terms may be modified, if at all, only in writing signed by a Kendall Howard officer. This Warranty is effective as of the date of Kendall Howard’s receipt of full payment and supersedes all previous warranties Kendall Howard reserves the right to supplement or change the terms of this Warranty in any subsequent warranty offering to User or others. If any provision of this Warranty should be or becomes invalid and/or unenforceable during the warranty period, the remaining terms and provisions shall continue in full force and effect. The user must complete the attached User Information Card and forward it to Kendall Howard within thirty (30) days of receipt of the Kendall Howard product. This Warranty is given in and performance hereunder is to be construed under the laws of the State of Nebraska. This Warranty represents the entire agreement between Kendall Howard and User concerning the subject matter herein and supersedes all prior or contemporaneous oral or written communications, representations, understandings, or agreements relating to this subject.
Support
- Support is available through the following methods:
- By Phone from 8:00 AM to 5:00 PM CST. 651.213.1333
- By Email customerservice@kendallhoward.com
- By Mail 10152 Liberty Lane, Chisago City, MN 55013
- By Web www.kendallhoward.com