HALCYON EX105 1B27 Dimmable Landscape Spike Spot Installation Guide
- June 10, 2024
- HALCYON
Table of Contents
HALCYON EX105 1B27 Dimmable Landscape Spike Spot
Specification
Note:
Due to the rugged nature of exterior landscape lighting installations, the
EX1O5 series features an easily replaceable lamp for ease of maintenance and
repair. Replacement lamp code EX1O5 3W27KREP.
SAFETY INSTRUCTIONS
Read these instructions carefully before commencing installation and retain them for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance. Install as described.
- Modification or misuse of the luminaire voids the warranty.
- Do not connect the luminaire to a live power source.
- Take care during installation, incorrect connection may damage the luminaire resulting in a reduced lifespan.
- 316 Stainless steel surfaces should be maintained regularly if the factory polished appearance is desired, clean with a soft cloth and a neutral detergent.
- Halcyon Lighting is free to change the design, specifications, and instructions for the assembly of the luminaire without notice.
- Halcyon Exterior products go through extensive waterproof testing prior to sale. Due to the nature of the tests, all Copper luminaires will have slight “water staining”. Please note that once installed Copper develops a natural patina finish and this will negate any effects from the aforementioned testing process.
INSTALLATION INSTRUCTIONS
Maximum Circuit Runs
Maximum recommended circuit runs are calculated by the max wattage I amperage
of the driver vs the number of lights of the circuit and start-up/operating
current required by each light. For long runs, voltage drop must also be taken
into account.
