Taylor Pneumatic Tool Company T-9600C 6 Vertical Cup Grinder Instruction Manual

: June 10, 2024
: Taylor Pneumatic Tool Company

Table of Contents

OVERVIEWS
General instructions for type 27 Grinders
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Taylor Pneumatic Tool Company T-9600C 6 Vertical Cup Grinder

OVERVIEWS

Overviews

Ref #

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

| Part #

960001

960002

960003

960004

960005

960006

960007

960008

960009

960010

960011

960012

960013

960014

960015

960016

960017

960018

960019

960020

960021

960022

960023

960024

960025

960026

9600C27

960028

960029

960030

960031

960032

9600C33

9600C34

9600C35

9600C36

| Description

Housing Hex Bolt

Spring Washer Washer

Screw Packing

Governor Cage Weight

Roll Pin Shaft Valve

Valve Spring

Valve Spring Holder Screw

U- Nut Cover Bearing Upper Plate Roll Pin Rotor

Rotor Blade (Set of 5) Cylinder

Roll Pin Adjusting Collar Adjusting Washer

Lower Cylinder Plate Wrench 19MM Bearing

Bearing Spacer Rotor Nut Adjusting Washer Housing

Wheel Guard Spring Washer Hex Bolt Wheel Flange

| Qty.

1

4

1

3

1

2

1

1set 1

2

1

8

4

1

---|---|---|---
#

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

|

9600C37

9600C38

960039

960040

960041

960042

960043

960044

960045

960046

960047

960048

960049

960050

960051

960052

960053

960054

960055

960056

960057

960058

960059

960060

960061

960062

960063

960064

960065

9600C66

9600C67

9600C68

9600C69

9600C70

9600C71

960072

9600C73

| Description

Wheel Flange Screw

Throttle Valve Body Throttle Valve Rod Bushing Throttle Valve Rod

Throttle Valve

Throttle Valve Washer Sub Throttle Valve Throttle Valve Spring Inlet Bushing

Exhaust Cover Exhaust Valve Muffler Plate Roll Pin Muffler Spring Spring Washer Hex Bolt

Hex Bolt Dead Handle

Spring Washer Washer

Throttle Valve Lever Lock Key

Lock Spring Bolt

O-Ring

Spring Washer Hex Bolt

Pin

Spanner Wrench Wrench 41MM Allen Wrench Allen Wrench Allen Wrench Washer

Bolt

Wheel Guard

| .

1

4

2

1

2

1

4

1

General instructions for type 27 Grinders

OILING INSTRUCTIONS: OIL AFTER EACH USE WITH 21 OORR32TTAEBALSESPPOOOONNSSOOFF AIRTOOL OIL THROUGH THE AIR INLET. RUN FOR ONE SECOND TO COAT ALL INTERNAL PARTS.
TYPE 27 GRINDERS – GENERAL INSTRUCTIONS

ALWAYS DISCONNECT THE TOOL FROM AIR SOURCE WHEN CHANGING ACCESSORIES OR SERVICING THE TOOL
USE SAFETY GLASSES, FULL FACE SHIELDS, HEARING PROTECTION AND GLOVES.
STAY IN CONTROL OF THE GRINDER – DO NOT OVER REACH.
ALWAYS REMOVE WRENCHES FROM THE TOOL AFTER SERVICING. WRENCHES LEFT ATTACHED MAY RESULT IN SERIOUS HARM TO THE OPERATOR.
VIBRATION MAY BE HARMFUL TO YOUR ARMS AND HANDS. WEAR PROTECTION.
INSPECT THE TOOL AND AIR SUPPLY ON A REGULAR BASIS.
DO NOT REMOVE GUARDS OR SAFETY DEVICES. DO NOT MODIFY OR DEFEAT SAFETY DEVICES.
DO NOT MAKE CONTACT WITH ELECTRICAL LINES.
LEAVE TRIGGER OFF BEFORE CONNECTING THE TOOL TO THE AIR SUPPLY. AVOID ACCIDENTAL STARTS.
WEAR THE PROPER CLOTHING. DO NOT WEAR JEWELRY, LOOSE CLOTHING, OR LONG HAIR AS IT CAN GET CAUGHT IN ROTATING PARTS. KEEP GLOVES AWAY FROM ROTATING PARTS.
DO NOT WORK IN HAZARDOUS ATMOSPHERES WHERE SPARKS COULD IGNITE OR DETONATE FUMES.
WATCH WHAT YOU ARE DOING. USE COMMON SENSE WHEN OPERATING PNEUMATIC TOOLS. DO NOT USE PNEUMATIC TOOLS WHEN TIRED OR UNDER THE INFLUENCE OF MEDICATION, ALCOHOL OR DRUGS. SERIOUS PERSONAL INJURY MAY RESULT FROM A MOMENTS INATTENTION.
USE 90 PSI OF CLEAN AIR AT THE TOOL. USE 3/8″ HOSE OR LARGER WITH FITTINGS 9/32 MINIMUM I.D.
ONLY USE CLEAN DRY COMPRESSED AIR. NEVER USE OXYGEN, CARBON DIOXIDE, COMBUSTIBLE GASES OR ANY OTHER BOTTLED GAS TO POWER THIS TOOL.
SECURE YOUR WORK BEFORE STARTING – USE CLAMPS OR FIND A SUITABLE WAY TO MAINTAIN STABILITY.
. STORE TOOLS IN A CLEAN DRY ENVIRONMENT.
DO NOT USE DAMAGED TOOLS – MARK, AND RETURN FOR SERVICE.
NEVER FORCE THE TOOL. LET THE TOOL DO THE WORK.
STOP USE IMMEDIATELY IF TOOL IS MAKING AN UNUSUAL NOISE OR VIBRATION. HAVE TOOL CHECKED BY PROFESSIONAL TECHNICIAN.
OPERATE AT RATED TOOL SPEED.
ALWAYS USE A GRINDING WHEEL WITH A MAXIMUM SPEED RATING EQUAL TO OR GREATER THAN THE LABELED SPEED OF THE TOOL.
USE ONLY REINFORCED TYPE 27 WHEELS 7″ OR 9″ IN DIAMETER .
FOLLOW WHEEL MANUFACTURERS MOUNTING INSTRUCTIONS.
DO NOT OPERATE WITHOUT THE WHEEL GUARD IN PLACE.
WORK IN A WELL VENTILATED AREA AND USE APPROVED PERSONAL PROTECTIVE EQUIPMENT SUCH AS DUST MASKS, THAT ARE SPECIFICALLY DESIGNED TO FILTER OUT MICROSCOPIC PARTICLES. SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING AND OTHER CONSTRUCTION ACTIVITIES CONTAIN CHEMICALS KNOWN TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. SOME EXAMPLES OF THESE CHEMICALS ARE: CRYSTALLINE SILICA FROM BRICKS, CEMENT AND OTHER MASONARY
PRODUCTS, ARSENIC AND CHROMIUM FROM CHEMICALLY TREATED LUMBER AND LEAD FROM LEAD BASED PAINTS. YOUR RISK FROM EXPOSURE VARIES, DEPENDING ON HOW OFTEN YOU DO THIS TYPE OF WORK. TO REDUCE YOUR EXPOSURE TO THESE CHEMICALS WEAR PROTECTIVE MASKS AND CLOTHING.
KEEP CHILDREN, PETS AND BYSTANDERS AWAY WHILE OPERATING A PNEUMATIC TOOL. DISTRACTIONS CAN CAUSE YOU TO LOSE CONTROL. PROTECT OTHERS IN THE WORK AREA FROM DEBRIS SUCH AS METAL FILINGS AND SPARKS. PROVIDE BARRIERS OR SHIELDS AS NEEDED.
LUBRICATION – THIS TOOL REQUIRES A HIGH SPEED GREASE TO LUBRICATE THE PINION GEARS. ADD GREASE THROUGH THE GREASE FITTINGS AS NEEDED, APPROXIMATELY EVERY 8 HOURS.
THESE WARNINGS AND INSTRUCTIONS CAN NOT COVER ALL POSSIBLE CONDITIONS OR SITUATIONS. THE OPERATOR MUST UNDERSTAND THAT COMMON SENSE AND CAUTIONS ARE FACTORS WHICH CAN NOT BE BUILT INTO THE PRODUCT BUT MUST BE SUPPLIED BY THE OPERATOR.

Customer Service

505 N. Railroad Ave . 33435
P.O. Box 1117 33425
Boynton Beach, Florida
SEE OUR CATALOG
at
www.taylorpneumatic.com
PH. 561-732-1111
FAX 561-731-4412
Toll Free 800-805-8665
Taylor logo