Hyundai Indoor Camera User Manual
- June 10, 2024
- HYUNDAI
Table of Contents
User Manual
Indoor Camera
Indoor Camera
Thank you for purchasing the Hyundai Indoor Camera.
Please read this user manual carefully to fully understand the usage of the
camera. Keep the manual for future reference since it contains important
information.
PARTS DESCRIPTION
-
Status light
– Red light solids on: The camer network is abnormal
– Blinking red light: Awaiting WiFi connection
– Blue light solids on: Camera running correctly.
– Blinking blue light: Currently connecting -
SD Card slot
– Supports local SD Card storage (Max. 128GB) -
Speaker
-
Microphone
-
Power (USB)
-
Reset
To reset the camera press and hold for 5 seconds with the pin to reset the camera. (all settings will be returned to factory defaults)
CONNECT WITH HYUNDAI HOME APP
To control the Indoor camera you can use the HYUNDAI Home APP on your phone or tablet.
Scan the QR Code to download the APP: HYUNDAI Home.
If you can’t scan the QR code find the app “HYUNDAI Home” in the app store on
your device.
Create an account to start using the APP. If you already have an existing
account, enter your login details to continue.
https://www.alleenonline.nl/hyundai-home/
SET UP YOUR ROUTER
This device only supports 2.4GHz frequency band router, does not support 5GHz
frequency band router, please set the relevant parameters of the router before
WiFi configuration, WiFi passwords do not include special characters such as
~!@#$%^&*(). When the device is configured in WiFi, the mobile phone and
device are as close as to the router, which can speed up the configuration of
the device.
STEP 1: SET YOUR LOCATION
Set up your location in the app and create your rooms. In this way you can
control the lights per room seperately with one touch in the app.
Go to the “family location” and follow the instructions in the APP.
PAIRING YOUR DEVICES
Plug your Indoor camera into a power source and switch on.
-
Go to “Add Device” and click “security & Sensor” >> “Smart Camera”, and then choose “Add device” or “+”,to add the camera.
-
In “Add Device” interface,continue and click “next step”,and then you should input your WiFi’s passwords.
-
When finishing entering your WiFi password,you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. To complete the configuration takes about 30s.
-
When connecting,you should make sure your router,mobile,and camera are as close as possible.
When the camera is added successffully, you can name your device. -
After completing the paring, you can set your camera in the APP.
Check below for the functions of the camera
CAMERA FUNCTIONS
Video flip: Flip your video stream vertically at anytime for maximum
flexibility.
Motion detection: Motion sensors will notify you when movement is detected.
Record: Record every moment using high capacity SD card storage.
Day & Night: Powerful night vision means no interruptions, even in complete
darkness.
FAQ
Q: The camera cannot be previewed properly?
– A: Check whether the network is normal, you can place the camera close to the router, if not, it is better to reset the camera and add it again.
Q: Why is it still in the list of devices after reseting?
– A: The reseted camera only resets the network configuration of the camera, but cannot change the configuration in the App, remove the camera in your account,need to add again.
Q: How to cut the camera network to other router?
– A: First remove and reset the camera in your App account and then configure your camera again by the App.
Q: Why doesn’t the camera identify the SD card?
– A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
– A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.
SPECIFICATIONS
| Sensor type: | 1/2.0” CMOS |
|---|---|
| Pixel: | 2 Megapixels |
| Field of view: | 105º with pan (355º) and tilt (65º) |
| APP: | HYUNDAI HOME / Tuya |
| Lens: | 3.6mm F2.0 |
| Shutter: | 1/25-1/100.000 per second |
| IR: | High power LED with ICR |
| Max picture size: | 1920 x 1080 |
| Frame Rate: | 1.25 per second |
| Image setting: | Support HD/SD; support flip |
| Audio: | Two-way |
| Storage: | Support SD card (Max 128GB), Cloudr storage communication |
| Protocol: | HTTP, DHCP, DNS |
| WiFi standard: | IEEE802.11b/g/n |
| Frequency: | 2.4 Ghz – 2.4835 Ghz |
| Channel bandwidth: | Support 20/40 Mhz |
| Wifi security: | WPA-PSK/WPA2-PSK |
| Data security: | AES128 |
| Intellegence: | Support motion detection |
| Working temperature: | -20 ˚C – 50 ˚C |
| Power: | DC 5V, 1A |
| Consumption: | 2.5W MAX |
| Size: | 60 x 78mm |
| Weight: | 59.4 gram |
© 2021 The Investment Company Europe B.V.
PATENT PENDING
The artwork and design of this package are protected by European copyright law
and may not be reproduced, distributed, displayed, published or used for any
purpose without prior written permission. It is not permitted to alter, or
reproduce any trademarks or copyright notice from this package.
NL / EN – www.alleenonline.nl – BE / FR –
www.alleenonline.be