HOOVER HHP70CAH011 Air Purifier User Manual

HOOVER HHP70CAH011 Air Purifier

Product Information

The product is an air purifier with a multi-sensor system that continuously monitors indoor air quality in terms of PM10, PM2.5, and Volatile Organic Compounds (GAS). The product has a humidifier and diffuser function. It is wireless and can be connected via Wi-Fi or Bluetooth. The product has a child lock button, a digital display, and a CO alert button & LED.

General Safety Warnings
The product should be used in a safe environment. Follow the safety instructions provided in the user manual. The product should only be used with aroma oil recommended or supplied by HOOVER. Avoid using a stand-alone humidifier next to the air purifier when using the diffuser function of H-Essence. Wipe any spillage of  H-Essence immediately. Make sure to clean every corner of theproduct that had contact with H-Essence.

Product Usage Instructions

Getting to know your H-Purifier:

• The control panel/display is located at the top of the product.
• The air outlet is located at the front of the product.
• The product has a carry handle for easy transportation.
• The filter assembly is located inside the product.
• The air inlet cover handle is located at the back of the product.
• The filter release switch is located at the back of the product.
• The air inlet cover is located at the back of the product.
• The humidifier handle is located at the back of the product.
• The humidifier tank housing is located at the bottom of the product.
• The humidifier water tank is located inside the humidifier tank housing.
• The humidifier water tank cover is located on top of the humidifier water tank.
• The humidifier water tank inlet is located on the side of the humidifier water tank.
• The diffuser window is located at the front of the product.
• The diffuser cover is located on top of the diffuser window.
• The diffuser outlet is located at the front of the product.
• The diffuser unit is located inside the product.
• The H-Essence bottle (green) and H-Biotics bottle (brown) are used with the diffuser function and are located inside the product.
• The power cord & plug are located at the back of the product.
• The storage hook is located at the back of the product.
• The transportation location is located at the bottom of the product.

Multi-Sensor System:
Each time you switch your product on, the Multi-Sensor System will start analyzing the indoor air quality and the Air Quality LED Ring will illuminate with different colors representing real-time air quality conditions. The colors are:

• Green: Good air quality
• Yellow: Moderate air quality
• Orange: Poor air quality
• Red: Very poor air quality

Wireless Parameters for Pairing:
The product can be connected via Wi-Fi or Bluetooth. The technology standard, frequency bands, and maximum power transmitted in the frequency band are:

• Wi-Fi IEEE 802.11 b/g/n: 2401~2483 MHz, 100 mW
• Bluetooth Bluetooth v4.2, BLE: 2402~2480 MHz, 10 mW, 18.9 dBm

Using Environment
The product should be disposed of correctly to prevent potential negative consequences for the environment and human health caused by inappropriate waste handling of this product. The product is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

CO Monitor Safety Instructions
Follow the safety instructions provided in the user manual.

Diffuser Safety Instructions
Use only aroma oil recommended or supplied by HOOVER. Avoid using a stand- alone humidifier next to the air purifier when using the diffuser function of H-Essence. Wipe any spillage of H-Essence immediately. Make sure to clean every corner of the product that had contact with H-Essence.

Humidifier Safety Instructions
Follow the safety instructions provided in the user manual.

GENERAL SAFETY WARNINGS

• This appliance should only be used for private household use, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance and keep for future reference.
• Check if the voltage and ratings indicated on the label of the appliance correspond to the local power voltage before you connect the appliance.
• If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorized HOOVER service engineer must replace the power cord.
• Do not remove the plug by pulling the power cord.
• Lay the supply cord so nobody will step on or trip over it.
• Always switch off and unplug the appliance before moving or cleaning the appliance or any maintenance task.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as safety device in case of accidents with combustion processes and hazardous chemicals.
• Do not continue to use your appliance if it appears faulty.
• Do not block the air inlet or air outlet.
• Do not insert your fingers or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance.
• Do not clean the appliance with water, any other liquid, or a (flammable) detergent, nor let them enter the appliance to avoid electric shock and/ or a fire hazard.
• Do not spray any flammable materials such as insecticides or fragrance around the appliance. This appliance is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking.
• Use only consumables, filters or spares recommended or supplied by HOOVER.
• Make sure the filter is properly installed before you switch on the appliance.
• Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects. Keep the product dry.
• Never tilt or empty the product during operation.
• When the appliance is not used for a long time, bacteria may grow on the filters. Check the filters after a long period of disuse. If the filters are very dirty, replace them.
• HOOVER service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorized HOOVER service engineer.

USING ENVIRONMENT

• Place and use the product only on a dry, stable, level horizontal surface, so that tipping over is excluded.
• Leave at least 20cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance.
• To prevent interference, place the appliance at least 2m away from electrical appliances that use airborne radio waves such as TVs, radios, and radio-controlled clocks.
• Do not place anything on top of the appliance.
• Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes.

Do not place the appliance in any of the following locations:

• On hot surfaces, near hot surfaces, open fire or in direct sunlight, near gas appliances, heating devices or fireplaces;
• Next to or directly above heaters or air conditioning vents, doors, windows, extractor fans, cookers or anywhere that it would be affected by draughts;
• In a bathroom or other areas where the product may be exposed to water splashes, dripping or condensation (e.g. directly below an air conditioner or above an electric kettle);
• In an enclosed space (e.g. in or below a cupboard);
• In an area where the temperature could drop below –20°C or rise above 50°C;
• In a room with major temperature changes, in wet surroundings or in surroundings with high ambient temperatures or high humidity, such as the bathroom, toilet, or kitchen;
• Where it would be obstructed, e.g. by curtains or furniture;
• Where dirt or dust could block the sensor.

CO MONITORS SAFETY INSTRUCTIONS

If CO alarm is activated, you should open all windows and doors (if safe to do so). Turn off all fuel burning appliances if possible and then evacuate the property leaving the windows and doors open. Get immediate medical help for anyone suffering the effects of carbon monoxide poisoning. Do not re-enter the property until the alarm stops. The alarm will stop once the CO has cleared. Do not use fuel-burning appliances again until the CO source has been located and rectified by a qualified technician.

Avoid using paint, thinners, solvent fumes, air fresheners, aerosol sprays or chemical cleaners near the appliance. This may affect the functioning of CO monitor. To activate the CO monitor, connect the plug to a socket outlet. The CO Alert LED will display green. When the CO monitor detects unsafe level of CO, the CO alarm will ring loudly and the CO Alert button and Air Quality LED Ring will blink in red color. The alarm will continue to ring until the detected CO reduces to a safe level.

Touch CO Alert Button for 3 seconds to test the CO Alarm function and the alarm will ring loudly for 5 seconds. Test the alarm monthly and after a prolonged absences from the building (e.g. holidays). If the alarm fails to ring after touching the CO Alert Button for 3 seconds, please contact the Hoover customer care center to arrange a qualified technician to repair the fault. If the display indicates that the CO sensor is faulty or end of life has been reached, please contact the Hoover customer care center to arrange a qualified technician to replace the CO sensor. The expected lifetime of the CO sensor is 7 years and must be replaced after this time. Do not allow small children to press the CO Alert button for 3 seconds as they could be subject to excessive noise when the alarm rings.

• Operating Humidity: 15 – 90% RH
• Operating Temperature: 0°C to + 40°C

Carbon Monoxide affects the body by starving (suffocating) critical organs of oxygen. When CO is inhaled it attaches to the hemoglobin in the blood that normally carries oxygen throughout the body. CO permanently displaces the ability for oxygen molecules to attach to the hemoglobin, thus reducing oxygen to vital organs. The concentration level and time exposed to CO can vary its effects on the body, but experts agree even low levels of carbon monoxide exposure over prolonged periods can have serious and lasting effects to anyone’s overall health.

WARNING:
THE CO ALARM IS DESIGNED TO PROTECT INDIVIDUALS FROM THE ACUTE EFFECTS OF CARBON MONOXIDE EXPOSURE OR PREVENT THE CHRONIC EFFECTS OF CARBON MONOXIDE EXPOSURE. IT WILL NOT FULLY SAFEGUARD INDIVIDUALS WITH SPECIFIC MEDICAL CONDITIONS. IF IN DOUBT CONSULT A MEDICAL PRACTITIONER.

The CO Monitor function is not to be used as, nor implied to be used as a substitute for an EN 50291-1 UL-2034, CSA-6.19 or any other recognized standard certified carbon monoxide alarm where Local or Regional Codes or legislation mandate their use. The CO Monitor function is a supplemental carbon monoxide monitoring device only. Use of this device is at the user’s discretion and implies the understanding and acceptance of its limitations to adhere to codes or legislation where applicable. This appliance should not be used as a substitute for proper installation, use and maintenance of fuel- burning appliances including appropriate ventilation and exhaust systems. The CO monitor mobile and tablet notifications require a functional Wi-Fi connection to operate. They are not a substitute for a third-party emergency monitoring service.

DIFFUSER SAFETY INSTRUCTIONS

• Use only aroma oil recommended or supplied by HOOVER.
• Avoid using a stand-alone humidifier next to the air purifier when using the Diffuser function of H-Essence.
• Wipe any spillage of H-Essence immediately. Make sure to clean every corner of the product that had contact with H-Essence.

HUMIDIFIER SAFETY INSTRUCTIONS

• Clean the water tank every 3 days.
• Use only distilled water to fill the water tank. Do not fill with other water, such as tap water, mineral water, river water and so on.

The water in the water tank is not suitable for drinking. Do not drink this water and do not use it to feed animals or to water plants. When you empty the water tank, pour the water down the drain.

• Do not put any substance other than distilled water in the water tank.
• Do not put liquids with fragrances/perfume or H-Essence in the water tank.
• Empty the tank and the housing and refill every three days.
• Before refilling, clean the tank and the housing with fresh tap water. Remove any scale, deposits, or film that have formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
• Unplug the appliance during filling and cleaning.
• Empty and clean the humidifier before storage. Clean the humidifier before the next use.
• Never leave water in the water tank and tank housing when the appliance is not in use.
• Do not permit the area around the humidifier to become damp or wet.
• If dampness occurs, turn the output of the humidifier down, and use the humidifier intermittently. Do not allow absorbent materials such as carpeting, curtains, drapes or tablecloths to become damp.
• If you need to move the appliance, disconnect the appliance from the power supply first.
• Then empty or remove the water tank. Carry the appliance vertically by the handles on both sides of the appliance.
• Avoid using a stand-alone device that releases or sprays aroma oil next to the air purifier when using the Humidifier function.
• Be aware that high humidity levels may encourage the growth of biological organisms in the environment.

WARNING:
Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air causing very serious health risks when the water is not renewed and the tank or housing is not cleaned properly every 3 days.

The Environment
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead, it must be handed over
to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about the treatment, recovery, and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

Wireless Parameters for Pairing

Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: www.candy- group.com

CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

GETTING TO KNOW YOUR H-PURIFIER

MULTI SENSOR SYSTEM
Thanks to the Multi-Sensor System your product will continuously monitor the indoor air condition in terms of PM10, PM2.5 and Volatile Organic Compounds (GAS). Each time you switch your product on, the Multi-Sensor System will start analyzing the indoor air quality and the Air Quality LED Ring will illuminate with different colors representing real-time air quality conditions.

Air Quality LED Ring Color| Indoor Air Quality| *PM 10 value μg/m³| PM 2.5 value μg/m³| GAS VOC**

Level

---|---|---|---|---
GREEN| Excellent| 0-50| 0-25| L1
YELLOW| Satisfactory| 50-80| 25-50| L2
ORANGE| Poor| 80-160| 50-100| L3
RED| Very poor| ≥ 160| ≥ 100| L4

In Pollen Allergy mode, PM 10 values that trigger the air quality level will be lower to minimize the risk for allergic people.

CARBON MONOXIDE (CO) ALERT
H-Purifier is equipped with an alert system that will constantly monitor the indoor air for Carbon Monoxide (CO). When the Carbon Monoxide alarm is activated, the AIR Quality LED Ring, Infomation & CO Alert button will flash red simultaneously and an audible alarm will sound. The alarm will remain in operation until the Carbon Monoxide (CO) concentration has reduced to below 50 ppm unless silenced manually by pressing the CO Alert Button for 3 seconds. The CO Alert LED shows the working condition of the CO sensor. It appears in green color when the CO sensor is in normal condition, in yellow color when the sensor is malfunctioning or exceeds its working life, and in red color when the CO alert is activated.

You can test if the alarm is working properly by pressing the CO Alert Button for 3 seconds, a loud buzzer sound will last for 5 seconds if the alarm works properly.

PREPARING YOUR H-PURIFIER

INSTALL THE FILTER [Fig. 1]
Before using your H-Purifier product you will need to remove the Filter from its protective packaging:

• Remove the Air Inlet Cover from your product, grip the two Air Inlet Cover Handles and pull from the product. [Fig. 1a]
• Remove the plug from the Transportation Location and release the cord from the Storage Hook. [Fig. 1b]
• Unlock the Filter Release Switch. [Fig. 1c]
• Remove the Filter from your product and remove the outer packaging. [Fig. 1d,e]
• Refit the Filter into your product. [Fig. 1f]
• Lock the Filter Release Switch. [Fig. 1g]
• Refit the Air Inlet Cover to your product. [Fig. 1h]

INSTALL THE DIFFUSER BOTTLE [Fig. 2]
To prepare your H-Purifier product for the Diffuser function:

• Remove the Diffuser Cover from the product. [Fig. 2a]
• Remove the Diffuser Unit from the Diffuser Cover. [Fig. 2b]
• Remove the bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 2c]
• Preserve the cap for future storage use.
• Tightly screw the bottle on the Diffuser unit. [Fig. 2d]
• Refit the Diffuser Unit into the Diffuser Cover. [Fig. 2e]
• Refit the Diffuser Cover into the product. [Fig. 2f]

PREPARE THE HUMIDIFIER [Fig. 3]
To prepare your H-Purifier product for the Humidifier function:

• Remove the Tank Housing from the product. [Fig. 3a]
• Remove the Tank Assembly from the Tank Housing. [Fig. 3b]
• Before the first use clean all the parts with a dry soft cloth.
• Fill the tank through the Water Tank Inlet with distilled water until it reaches the MAX line indicated on the tank. [Fig. 3c]
• Refit the Tank Assembly into Tank Assembly Housing. [Fig. 3d]
• Refit the Tank Assembly Housing into your Product. [Fig. 3e]

USING YOUR H-PURIFIER

SWITCH ON THE PRODUCT [Fig. 4]:
Pull out the power cord from the cord reel and plug into a power supply. All lights on the Control Panel / Display will fully illuminate for approximately 1 second to indicate a successful plug-in.

The POWER button will be dimly lit and the CO Alert LED will be ON to indicate that the dedicated sensor has started working to monitor the indoor Carbon Monoxide level.

To switch on your product, press the POWER button on the display. The Air Quality LED Ring will illuminate through all colours in sequence whilst the sensors are analyzing the real-time air quality condition. After a few seconds, the Air Quality LED ring will select the appropriate colour for the air quality at that time. Your H-Purifier product will immediately enter AUTO MODE and begin to purify the indoor air. The AUTO MODE button, INFORMATION button, LIGHT CONTROL button and PM10 information on the Display will illuminate.

CONNECT YOUR H-PURIFIER:
In order to access all the H-Purifiers functions from anywhere, it is suggested to download the hOn App. You will be able to control your product in the most efficient way.

Instructions:

1. Download the hOn application from the Apple App Store, Google Play or Huawey App Gallery. You can also download it by scanning the QR code in [Fig. 5]
2. Open the APP, create an account with your e-mail and a password.
3. Confirm and log into the hOn App.
4. Ensure your mobile device is connected to Wi-Fi.
5. Ensure your H-Purifier is switched on. Press and hold the Wi-Fi button on the display for 5 seconds, there will be an audible beep and the Wi-Fi button will start flashing to indicate it is waiting for a connection. [Fig. 6]
6. Follow the in app instructions to connect your mobile device to your product.
7. When successfully paired, the Wi-Fi button on the product will remain illuminated.
8. To reset the Wi-Fi, press & hold the Wi-Fi button for 5 Secs.

H-Purifier also works with Hey Google and Amazon Alexa.

DISCOVER ALL THE FUNCTIONS

INFORMATION Function [Fig.7]:

There are 6 different data sets available to monitor:

• PM10, PM2.5, GAS, Temperature, Humidity, and Filter Status.
• To monitor each value simply press consecutively the INFORMATION button.
• By default the display will show the PM10 data, the machine will remember user’s last selection and maintain this selection the next time the product is switched on.
• The GAS data will show a spinning cursor during the first 3 minutes after product is switched on, while the GAS sensor is performing a calibration cycle.

More info on PM 2.5, PM 10 and GAS:
PM indicates fine particles (not visible to the human eye) deriving mainly from outdoor pollution such as vehicles and industrial emissions and are potentially dangerous to our health in case of prolonged exposure. PM 10 have a size up to 10 µm and are capable of penetrating the upper respiratory tract (nose, trachea, pharynx). PM 2.5 have a size up to 2.5 µm and given their small dimension, they can reach our lungs, thus penetrating deeper into our body. GAS VOC (volatile organic compounds) are volatile chemical compounds with the ability to evaporate easily in the air at room temperature. Deodorants, detergents, glues, adhesives, cosmetics, and formaldehyde are just some of the VOCs that could be present in our homes but potentially harmful to our health in case of prolonged exposure.

MODE Functions:

There are 3 available air purifying modes:
AUTO MODE, MAX MODE & SLEEP MODE. Auto mode is the default setting for your product when switched on, all modes can be selected manually by pressing the related button on the display. POLLEN ALLERGY mode can only be activated via the hOn app.

AUTO MODE [Fig. 8]:
This is the default mode of your H-Purifier product when first switched on. In Auto Mode, the H-Purifier automatically adjusts its fan speed to the actual indoor air quality level to always guarantee optimal air purification. This is the recommended setting for your product. In AUTO mode, after 30 minutes of excellent air quality, your product will enter an ECO mode (Stand-by function) by pausing the purifying function (fan), the Multi-Sensor System will continue to analyze the indoor air and automatically switch on the purifying function when required.

MAX MODE [Fig. 9]:
Press the MAX mode button on the display to activate air purifying at the maximum power setting. To exit MAX mode simply select AUTO mode or SLEEP mode.

SLEEP MODE [Fig. 10]:
Press the SLEEP mode button to activate air purifying at the lowest silent power setting. The SLEEP mode button will be dimly lit and all other display lights will be off. This can be modified by pressing the LIGHT CONTROL button. POLLEN ALLERGY MODE: [Fig. 11]

• The Pollen Allergy mode can only be activated via the hOn APP. You will first be required to activate and register a profile in the app, in order to create your Pollen Allergy Profile.
• The Pollen Allergy mode works only when AUTO MODE is selected. [Fig. 11c]
• In Pollen Allergy mode, the appliance continuously receives real-time data from the APP about the monitored pollen concentration outdoor, and works automatically to maximize pollen-capturing performance.
• Once pollens are captured, they are inactivated to help alleviate allergic symptoms.

When Pollen Allergy mode is activated in the App, there are 2 possible notification lamps on the product display:

• The Pollen Allergy Lamp is WHITE [Fig. 11a]: The appliance and the App are monitoring the presence of pollens outdoor and there is no risk.
• The Pollen Allergy Lamp turns YELLOW and the Pollen Allergy Circle lamp is WHITE [Fig. 11b]: The appliance and the APP have detected risk.

If the product is manually put into SLEEP mode or MAX mode whilst Pollen Allergy mode is activated, the Pollen Allergy mode will stop.

LIGHT CONTROL Function: [Fig. 12]

• There are 3 settings available for the display lighting On, Dim & Off.
• To adjust the brightness of the display simply press the LIGHT CONTROL button on the display to cycle through the 3 available options. ON is the default setting.
• If OFF is selected, any other button will need to be pressed twice to activate, after one press, the lights will become DIM, on second press the action will be activated.

CHILD LOCK Function: [Fig. 13]
Press and hold the CHILD LOCK button for 3 seconds to activate this function, an audible sound will be heard when it has been activated and the CHILD LOCK button will remain illuminated. No other buttons will work when activated. To exit, simply press and hold the CHILD LOCK button for 3 seconds, an audible sound will be heard confirm it is off and the button will no longer be illuminated.

DIFFUSER Function: [Fig. 14]

• The diffuser spreads into the air of the room H-Essence or H-Biotics. H-Essence is the Hoover collection of essential oils to release into the air enjoyable fragrances.
• H-Biotics is a natural blend based on probiotics that keeps the room bio-organized by inhibiting the growth of microorganisms such as bacteria or microbes.
• There are 4 different settings for the DIFFUSER function: SOFT, MEDIUM, CUSTOM & H-BIOTICS. To activate this function simply press the Diffuser button on the Display, the default setting for this function is SOFT, to select any of the other settings simply consecutively press the button to change to the desired selection. The button will illuminate white when switched on.

It is recommended to use SOFT & MEDIUM settings for H-Essence. CUSTOM setting can only be created on the hOn App. When using H-Biotics, the setting MUST be on H-Biotics. Once user activates H-Biotics using the APP, this will give an alert of “ACTIVATE H-BIOTICS” after 120 hours to ensure the use of H-Biotics every 5 days.

When using H-Essence in certain settings or room environment, the GAS VOC level may change due to the detection of the fragrances. The Diffuser Function only works when the Air Quality LED Ring is on green color, it will pause when the LED Ring is not green and continue working when it gets back to green. The Diffuser function can only be used in AUTO & MAX modes and cannot be used in SLEEP mode. When activating the Diffuser function in AUTO mode, the main fan will work with a specific speed to help to spread the H-Essence or the H-Biotics into the room.

• To switch off the function, press the diffuser button until OFF appears on the Display.
• After each use of the Diffuser function, use a dry soft cloth to clean any residue from the product surfaces.
• To change the bottle in the diffuser unit, see the ‘Maintaining your H-Purifier’ section.

HUMIDIFIER Function: [Fig. 15]
There are 3 different settings for the Humidifier function: MIN, MED & MAX. To activate this function simply press the Humidifier button on the display, the default setting for this function is MIN. To select any of the other settings simply consecutively press the button to change to the desired selection. The button will illuminate white when switched on.

• MIN – Default Target Humidity 40%
• MED – Default Target Humidity 55%
• MAX – Default Target Humidity 70%

All 3 Target levels can be customized through the hOn app within a range of 30-80% Target Humidity. To switch off the Humidifier function, press the humidifier button until OFF appears on the Display.

If the real-time Humidity level is equal or higher than the one selected, a message will appear on the display showing ‘HUMIDITY REACHED’. The Humidifier Lamp will remain on. The product will automatically activate the Humidifier function when the real-time Humidity drops below the selected target level.

The Humidifier function can only be used in SLEEP & AUTO modes and cannot be used in MAX mode.

REFILL ALERT:
When water level is lower than the minimum level, the display will show a REFILL WATER message blinking. For instructions see Maintaining your Purifier section.

Important Note:

• When the product is working in Diffuser Function: If Humidifier Function is selected without turning off Diffuser Function, the product will automatically stop Diffuser Function and start Humidifier Function.
• When the product is working in Humidifier Function: If Diffuser Function is selected without turning off Humidifier Function, the product will automatically stop Humidifier Function and start Diffuser Function.

MAINTAINING YOUR H-PURIFIER

FILTER MAINTENANCE
Your H-Purifier will monitor the condition of your filter. A CLEAN FILTER OR REPLACE FILTER alert will blink on the left side of the display indicating action is required to clean or change the filter.

Cleaning / Replacing the Filter: [Fig. 16]

• Remove the Air Inlet Cover from your product. [Fig. 16a]
• Unlock the Filter Release Switch. [Fig. 16b]
• Remove the Filter from your product. [Fig. 16c]
• Use a Vacuum Cleaner to clean the external layer of the Filter or Replace with a NEW filter. [Fig. 16d]
• Refit the Filter into the product. [Fig. 16e]
• Lock the Filter Release Switch. [Fig. 16f]
• Refit the Air Inlet Cover to your product. [Fig. 16g]
• Plug in your appliance to the power supply and switch on.
• Press the INFORMATION button to reset the Cleaning/ Replacing alert by holding the button for 3 secs, an audible alert will be heard to indicate a successful reset. [Fig. 7]

DIFFUSER MAINTENANCE
After each use of the Diffuser function, use a dry soft cloth to clean any residue from the product surfaces.

Diffuser Bottle Replacement: [Fig. 17]
The volume of liquid in the bottle can be checked through the Diffuser Window, when required the bottle should be replaced.

• Remove the diffuser cover from the product. [Fig. 17a]
• Remove the Diffuser Unit & Bottle from the diffuser cover. [Fig. 17b]
• Unscrew & remove the empty bottle. [Fig. 17c]
• Remove the new bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 17d]
• Tightly screw the new bottle onto the diffuser unit. [Fig. 17e]
• Refit the diffuser unit into the diffuser cover. [Fig. 17f]
• Refit the Diffuser cover into the H-Purifier. [Fig. 17g]

HUMIDIFIER MAINTENANCE

Refill Water Tank Alert:
For the Humidifier to work a minimum level of water is required. When water level is lower than the minimum level, the display will show REFILL WATER message blinking. There may be residual water in the Water Tank Housing. The message will show anyway because of the minimum water level required.

• Remove the Tank Housing from the product. [Fig. 18a]
• Remove the Tank Assembly from the Tank Housing. [Fig. 18b]
• Remove any residual water and fill the tank through the Water Tank Inlet with distilled water until it reaches the MAX line indicated on the tank. [Fig. 18c]
• Refit the Tank Assembly into the Tank Housing. [Fig. 18d]
• Refit the Tank Housing into the Product. [Fig. 18e]

STORAGE OF YOUR H-PURIFIER

1. Switch off the H-Purifier and unplug the power cord.
2. Clean all the internal and external surfaces of the H-Purifier, the external layer of the Filter, the Water Tank.
3. Remove the bottle from the diffuser. Refit the original cap onto the bottle and store it to protect from direct light. Clean the surfaces of diffuser unit and Diffuser Cover. Make sure there is no residual of H-Essence or H-Biotics on any surface of the H-Purifier.
4. Ensure all components are dry.
5. Remove the Air Inlet Cover [Fig. 19a], reel in the power cord by pulling on the cord [Fig. 19b], fit the cord into the Storage Hook and fit the plug into the Transportation Location. [Fig. 19c,d] Refit the Air Inlet Cover [Fig. 19e]
6. Store the H-Purifier in a cool dry place.

ALERTS & SOLUTIONS

The following codes may appear during use. [Fig. 20]

“CLEAN FILTER”

| ****

Pre-Filter cleaning Alert

| ****

Suggest to clean the external layer of the Filter.

| 1. Clean the external layer of the Filter.

2. Reset the alert by holding the INFORMATION button for 3 secs.

Refer to 4.1 FILTER MAINTENANCE

“REPLACE FILTER”

| ****

Filter replacement Alert

| ****

Suggest to replace the Filter.

| 1. Replace the Filter.

2. Reset the alert by holding INFORMATION button for 3 secs.

Refer to 4.1 FILTER MAINTENANCE

“FILTER MISSING”

| Error: an error occurred with the air purifier, please check possible solutions| ****

Filter is not in position or is not correctly locked

| 1.  If filter is not present, put it back.

2.  If filter is in position, check whether the Filter

Release Switch is on LOCK status.

Refer to 2.1 INSTALL THE FILTER

“NO WATER TANK”

| Error: an error occurred with the air purifier, please check possible solutions| ****

Water tank or tank housing is not present.

| ****

Put back the water tank and tank housing.

“CLEAN WATER TANK”

| ****

Water in the tank needs to be replaced

| ****

3 days has passed since last time using humidifier, the tank/housing need to be cleaned and water need to be replaced for hygiene purpose.

| 1. Switch off the product.

2. Remove the tank/housing, clean the internal

surface of each component and refill.

3. Switch on the product.

4. Put back the tank/housing.

Refer to 4.3 HUMIDIFIER MAINTENANCE

“REFILL WATER”

| Error: an error occurred with the air purifier, please check possible solutions| ****

There is no water in the tank, or the remaining water is not enough for humidifier working.

| ****

Refill distilled water in the tank until it reaches the

MAX line.

“PM SENSOR ERROR”| /| PM sensor malfunctioning| PM sensor failure or sensor wire has not been

connected well, please call service center to fix.

CO Alert LED is yellow

| Error: an error occurred with the air purifier, please check possible solutions| ****

CO sensor malfunctioning or CO sensor exceeds its working life.

| ****

Call service center to fix.

Automatically switched off without any alert

| ****

Product falling

| ****

Product falling protection

| 1. If product falls and there is water spilling, unplug the power supply and wait for 48 hours before switching on the product again.

2. If product falls without water spilling, lift the product up and touch Power button to switch it on.

/

| Error: an error occurred with the air purifier, please check possible solutions| ****

Motor failure

| ****

Motor failure or motor wire has not been

connected well, please call service center to fix.

“TEMP. & HUMI. SENSOR ERROR”

| /| ****

Temperature and humidity sensor malfunctioning

| Temperature and humidity sensor failure or sensor wire has not been connected well, please call service center to fix.

“PAUSE”

| /| Diffuser working will pause when Air Quality LED Ring is not green.| No need action. Diffuser working will resume when Air Quality LED Ring is green.

ATTENTION:
If any of these failures persist, contact your local Hoover representative. DO NOT try to disassemble the H-Purifier by yourself.

TROUBLESHOOTING

The following is a list of commonly encountered problems and solutions. If any of these problems persist contact your local Hoover representative.

The Fan does not work (Control Panel / Display Lights on)

| •   Check the alert showing on the display or in the app. If there is, refer to 6. ALERTS AND SOLUTIONS.

•   Check if there are any obstructions in the fan. If there is, first unplug the product, and clear them, or call

service center to clear.

•   Check if the H-Purifier is switched on.

•   Check if the Filter is correctly installed and in locked status.

•   Check if the H-Purifier is in a completely vertical position and not leaning.

•   The H-Purifier may be in the ECO mode. You could press Sleep Mode Button or Max Mode Button to exit

the ECO mode. Refer to 3. USING YOUR H-PURIFIER – AUTO MODE.

---|---
The Fan does not work (Control Panel / Display Lights off)| •   Check if the H-Purifier is plugged in and switched on.

•   Check the alert showing in the app. If there is, refer to 6. ALERTS AND SOLUTIONS.

No lights on Control Panel / Display (Fan working)

| •   In Sleep Mode, the default lights setting is off. You could press the Light Control Button to turn on the lights.

•   The lights may be switched off. Press the Light Control Button to turn on the lights. Refer to 3.USING YOUR H-PURIFIER – SLEEP MODE / LIGHT CONTROL Function.

Buttons on the Control Panel do not operate| •   Child Lock may be activated. You could press and hold the CHILD LOCK button for 3 seconds to exit. Refer to 3. USING YOUR H-PURIFIER – CHILD LOCK Function.

Air flow is weak

| •   Check if the protective packaging has been removed from the filter.

•   Check if there are any obstructions in the Air Inlet Cover or Air Outlet.

•   Remove the Air Inlet Cover and check the Filter condition. Clean the external layer or replace the Filter if needed. You could check the Filter Life status in Display by pressing Information Button.

•   Check if the H-Purifier is in Sleep Mode. The Fan operates at reduced power in this mode.

H-Purifier is operating loudly

| •   Check if there are any obstructions in the H-Purifier.

•   Check if the H-Purifier is running in Max Mode. The Fan operates at maximum power in this mode.

H-Purifier operates loudly suddenly

| •   Check if the H-Purifier is running in Auto Mode and the Air Quality LED Ring is not green. In Auto Mode, the H-Purifier automatically adjust its fan speed to the actual indoor air quality level. Refer to 3. USING YOUR H-PURIFIER – AUTO MODE.
H-Purifier makes a loud buzzer

sound all of a sudden

| •   The testing function of CO Alert button is activated by misoperation. The sound will automatically stop after 5 seconds. Refer to 1.2 CARBON MONOXIDE (CO) ALERT
“CLEAN WATER TANK” alert could not be reset| •   After cleaning the water tank/housing and refilling, switch on the H-Purifier. Do not insert the housing

until display shows “NO WATER TANK”.

IMPORTANT INFORMATION

Hoover Spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number.

Quality
Hoover’s factories have been independently assessed for quality. Our products are made using a quality system that meets the requirements of ISO 9001.

Your Guarantee
The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

PRINTED IN P.R.C.
48032693/03

References

• Hoover – официальный интернет-магазин бытовой техники
• Haier Europe – Designing the new era of living
• Electrodomésticos inteligentes | Candy
• Oficiálny web spoločnosti Hoover | Hoover
• Officielle hjemmeside af Hoover | Hoover

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>