CAMBRIDGE AUDIO Evo Series Evo 75 All In One Player User Manual

: June 4, 2024
: Cambridge Audio

Table of Contents

CAMBRIDGE AUDIO Evo Series Evo 75 All In One
Front Panel Controls
Evo 150 rear panel connections
Evo 75 rear panel connections
Remote control
Replaceable side panel
Getting connected
Network connections
AirPlay
Standby Mode
Technical speciﬁcations
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CAMBRIDGE AUDIO Evo Series Evo 75 All In One

Player

Front Panel Controls

Evo all one player / Front Panel Controls

Display
Skip
Play/Pause
Speaker output
Press this button to choose a diﬀerent speaker output from the menu. Use the source selector knob to select the speaker output between speaker A, speaker B, speaker A+B, headphone and Bluetooth devices.
Note : Speaker A, speaker B and speaker A+B are available on the Evo 150 only.
Volume/Source selector
To change the volume, rotate the front part.
To select a source, rotate the back part.
Info
During playback, pressing this button will cycle through ‘Now Playing’ screens. Press and hold to display the product info.
IR sensor
Standby/On
Headphones
For suitable headphones – connection will automatically mute the speaker output and the pre-out.

Evo Display

Evo all one Player / Evo Display

Album/Source artwork
Displays the album artwork. Alternatively, if no albums are available this will display the source input icon.
Track title, artist and album
For Internet Radio, this will display the radio station name and the current playback.
Format info
Displays the streaming sample rate. For Internet Radio, this will display the bitrate the station is streaming.
Source input
Displays the currently selected source input.
Progress bar
When available, this will display the current track progression during playback.
Track time
When available, this will display the elapsed track time during playback.
Clock
Network connection
Displays the current network connection.
Wireless network connection
Wireless connection with no internet access
Wired network connection
Wired connection with no internet access
No network connection
Speaker output
Displays the currently selected speaker output.
Mute volume
Displays when the network streamer is muted.
Firmware update
This indicates when new ﬁrmware is available. Press the ‘Info’ button on the front panel or use the Stream Magic app to update the network streamer’s ﬁrmware.
MQA indicator
See the MQA section for more details.
Shuﬄe, Repeat and Repeat +1

Evo 150 rear panel connections

Evo all one Player / Evo 150 Rear Panel Connections

AC Power socket
Speaker terminals
B Speaker
For connecting a second pair of loudspeakers.
Evo CD
A dedicated connection from an Evo CD player.
Audio return channel (ARC)
A connection from a TV that supports ARC function.
USB Audio In
For connecting to PC/Mac computers.
Note: For Class 2 USB audio, Windows-based PCs require a Cambridge Audio USB driver to be installed before connection.
Ground Switch
Note: The ground switch position should be set to 1 as default. Use another position if a humming noise occurs.
Position 1 – Normal/default position. The main unit audio ground is lifted from chassis earth.
Position 2 – USB Audio ground is lifted from the main unit audio ground, which is also lifted from chassis earth. This may be useful to reduce hum
and noise that can occur with some USB Audio setups.
Position 3 – Main unit audio ground is connected directly to chassis ground and USB Audio ground. For some setups, this can reduce hum or noise
when certain TVs, Turntables, and other equipment are connected to the Evo unit.
USB Media
For connecting local media storage. Note that the USB ports are not intended for connection to Apple mobile devices; no functionality, charging or otherwise is supported.
Ethernet
Use a wired connection for seamless playback of high-resolution 352.8kHz, 384kHz, and DSD 256.
Trigger Out
Use a link wire between the Evo 150 and a product that has a trigger input. This will synchronise the power state of both products when powering the Evo 150 on/standby.
Trigger In/IR In
Trigger In – Use a link wire between a product that has a trigger output and the Evo 150. This will synchronise the power state of the Evo 150 with the controlling unit
IR In – Receives modulated IR commands from an IR repeater or custom install systems.
RS232C
Custom install control – a full protocol is available for the Evo 150 on our website.
Digital Inputs (Coax and Optical)
** Note:** If a digital input is connected to a TV you can enable TV mode in the input settings of the StreamMagic app. This mode minimises lip-sync delays on the audio path by bypassing MQA decoding and also reduces the chance of dropouts and glitches from some TVs.
Analogue Inputs (AUX/XLR)
MM Phono input
For connecting a turntable that uses a moving magnet cartridge.
Ground
If your turntable has a separate grounding lead, then connect here.
Sub-Out
Pre-Out

Evo 75 rear panel connections

Evo all one player / evo 75 rear panel connections

AC Power socket
Speaker terminals
Evo CD
A dedicated connection from an Evo CD player.
Audio return channel (ARC)
A connection from a TV that supports ARC function.
Ground Switch
Note: The ground switch position should be set to 1 as default. Use another position if a humming noise occurs.
Position 1 – Normal/default position. The main unit audio ground is lifted from chassis earth.
Position 2 – Main unit audio ground is connected directly to chassis earth. For some setups, this can reduce hum or noise when certain TVs, Turntables, and other equipment are connected to the Evo unit
USB Media
For connecting local media storage. Note that the USB ports are not intended for connection to Apple mobile devices; no functionality, charging or otherwise is supported.
Ethernet
Use a wired connection for seamless playback of high-resolution 352.8kHz, 384kHz, and DSD 256.
IR In
Receives modulated IR commands from an IR repeater or custom install systems.
Digital Inputs (Coax and Optical)
Note: If a digital input is connected to a TV you can enable TV mode in the input settings of the Stream Magic app. This mode minimises lip-sync delays on the audio path by bypassing MQA decoding and also reduces the chance of dropouts and glitches from some TVs.
Analogue Input
Sub-Out
Pre-Out

Remote control

Evo all one player / remote control

Mute
Standby/On
Preset buttons
Press and hold to store the current source.
Note: Not available for media player queue, Air Play or Chromecast sources.
Speaker output
Press to choose a diﬀerent speaker output. Pressing this button will toggle the speaker output between speaker A, speaker B, speaker A+B, headphone and Bluetooth devices.
Info
During playback, pressing this button will cycle through ‘Now Playing’ screens. Press and hold to display the product info.
Brightness
Pressing this button will alter the brightness of the display backlight between bright, dim and an option to switch oﬀ the backlight.
Eject CD (Evo CD only)
Press to eject the CD from the slot.
Stop (Evo CD only)
Play/Pause/Skip
Source selection
Volume

Replaceable side panel

Evo all one player / replaceable side panel

When installing new magnetic side panels, please ensure that the groove cuts are aligned with the direction of the front panel. Insert from the rear by holding the rear of the panel.
Important note: The magnets can snap hard and pinch your ﬁngers if not done correctly.

Getting connected

Evo all one player / getting connected

Basic connections

The diagram below shows the basic connection of your Evo to a pair of loudspeakers.

Speaker B connections (Evo 150 only)
The diagram below shows the connection for a second pair of loudspeakers. Pressing the speaker output icon will scroll through the selection of speakers, speaker A, speaker B, and speaker A and B together.

Preamp Out connections
The Preamp Out sockets are for connecting to a power ampliﬁer or active subwoofer.

Balanced audio connections (Evo 150 only)
The diagram below shows how to connect the Evo 150 using the Balanced Audio inputs.

USB audio connection (Evo 150 only)
Important note: Before setting up your Evo 150 for the ﬁrst time, please make sure that the USB Audio connection is unplugged. USB Audio can be re- connected once any ﬁrmware updates are applied.

Network connections

Connecting to a wired network

Connect a network cable between the Evo and your router.

Connecting to a wireless network

Note : Your Evo will need to be in range of your wireless router.

StreamMagic app – Setup

Evo all one player / streammagic app setup

Your player is network connected, not only can you listen to devices connected to the inputs on the product but you can also stream music from many diﬀerent sources both on your home network and from the internet.To set up your player, please ﬁrst download the StreamMagic app from the Apple app store or Google Play store.

Set up

Switch on your player and follow the on screen instructions to select your preferred language.
Open the Stream Magic app and follow the instructions provided to complete setting up your player on your network. This process will also apply any new updates that may be pending.
Note : During the set up process you will be asked to give your player a name, please make sure this is unique to your player. This will make it easier to ﬁnd when using streaming and smart home services.
Once your player is connected to your home network you’ll have full control of your sources, including internet radio, streaming services, network and USB drives and more. For more information on our StreamMagic app, please visit: https://www.cambridgeaudio.com/streammagic

Google Home / Chromecast built-in

Evo all one player / google home chromecast built

Your player is network connected, not only can you listen to devices connected to the inputs on the product but you can also stream music from many diﬀerent sources both on your home network and from the internet. Your player features Chromecast built-in and can be incorporated in to your Google Home. To set up your player, download the Google Home app on your smart phone or tablet.

With Chromecast built into your player, your phone becomes your remote. Simply tap the Cast button from apps you already know and love to stream music, podcasts and playlists from your phone, tablet or laptop to your player.

Chromecast built-in

Your phone is your remote

Simply tap the Cast button from apps you already know and love. No new logins or downloads required.
Use your phone to search, play, pause and turn up the volume from anywhere in the home.
While you’re streaming, you can keep using your phone for other things – scroll through social media, send a text, and even accept calls.
Enjoy music throughout your house when you use multi-room casting with Chromecast-enabled speakers.
Just say “Hey Google” to cast to your player

Unlimited entertainment, all on your schedule

Works with hundreds of apps and new apps are being added all the time.
Choose from millions of songs from popular music services like Pandora, Spotify, and Youtube Music.

Android, Google Play and the Chromecast built-in logo are trademarks of Google Inc.

Bluetooth source

Evo all one player / bluetooth source
The Bluetooth source allows your player to receive wireless Bluetooth audio from most phones, tablets and laptops.

Pairing
To begin streaming high-quality music from your chosen media source it will ﬁrst need to be paired with your player.

Select the Bluetooth source on your player.
Open your mobile device or laptops Bluetooth settings.
Select your player from the list of available devices.
Your device should now connect to your player.

Once paired you should be able to connect to your player at any time by selecting the Bluetooth source on your player and then choosing your player from the list of previously connected devices.
Notes :

Your Bluetooth device can only be connected to your player while the Bluetooth source is selected.
The Bluetooth source cannot be used if listening on Bluetooth headphones via the Output Select feature.

AirPlay

Evo all one player / airplay

AirPlay is an Apple technology designed to control home audio systems and speakers in any room — with a tap or by just asking Siri — right from iPhone, iPad, HomePod, or Apple TV. Play a song in the living room and kitchen at the same time or adjust the volume in any room, all in sync. After installing your player, add it to the Apple Home app with a few simple steps using your iPhone or iPad

How to use AirPlay from iPhone or iPad

Ensure your player is connected to your network.
Open the app that you want to AirPlay from.
Tap or .
Select your player as your AirPlay device.

How to use AirPlay from Control Center

To switch the audio on your device from Control Center: Swipe up from the bottom edge of any screen on your device to open Control Center.
Touch and hold in the upper-right corner, then select your player.
This product supports AirPlay 2 and requires iOS 11.4 or later.
Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
Use of the Works with Apple badge means that an accessory has been designed to work speciﬁcally with the technology identiﬁed in the badge and has been certiﬁed by the developer to meet Apple performance standards.

Spotify Connect

Evo all one player / spotify connect

Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses

Bluetooth output

Evo all one player / bluetooth output
Your player supports Bluetooth output. This means you can send the audio from your player, wirelessly to Bluetooth headphones or a Bluetooth speaker.

Pairing

If you haven’t connected your player to a Bluetooth device previously you’ll need to use the Stream Magic app.

Make sure your Bluetooth device is set to pairing mode (see your Bluetooth device instructions for how to do this).
Open the Stream Magic app.
Tap select output on the home page.
Select Pair new Bluetooth device.
Select your Bluetooth device from the list of available devices.

Your player will now switch its audio output to playback on your Bluetooth device. Once paired your Bluetooth device will be remembered by your player.

To switch audio output to a Bluetooth device
Make sure your Bluetooth device is switched on and ready to connect. Either:

Open the Stream Magic app.
Tap Select Output on the Home page.
Choose your Bluetooth device.

OR

Press the Output select button on the remote or front panel.1.
Choose your Bluetooth device from the list.2.

To switch audio away from the Bluetooth device
either:

Switch oﬀ or disconnect your Bluetooth device.
OR
Choose a diﬀerent output from either the StreamMagic app or by pressing the output select button on the remote or front panel.

Notes:

Audio cannot be output to a Bluetooth device if the Bluetooth source is currently selected.
Please use the volume controls on your Bluetooth headphones.

MQA (Master Quality Authenticated)

Evo all one player / mqa master quality authenticated
The Cambridge Audio EVO includes MQA technology, which enables you to play back MQA audio ﬁles and streams, delivering the sound of the original master recording.

The front panel will display MQA green or blue to indicate that the unit is decoding and playing an MQA stream or ﬁle, and denotes provenance to ensure that the sound is identical to that of the source material. It displays MQA blue to indicate it is playing an MQA Studio ﬁle, which has either been approved in the studio by the artist/producer or has been veriﬁed by the copyright owner.

Settings

Evo all one player / settings

Device Name
This is how your player will appear in your StreamMagic app and on your home network when using services like Spotify, Chromecast built-in and TIDAL Connect. Giving your player a unique name makes it easier to distinguish when using streaming and smart home services.

AirPlay Name
This is how your player will appear when using AirPlay or the Apple Home app.

Standby Mode

This selects what type of standby mode your player will use.
Network Standby means your player will still be controllable by the Stream Magic app and other network services.
If Eco mode is chosen your player will use even less power in standby but will need to be switched on either by the front panel or the remote control.

Automatic Power Down
This sets how long your player will wait while inactive before switching in to standby.

Display Brightness
This sets the brightness of your player’s display. If set to ‘Oﬀ’ the display will show for a few seconds after any change and then switch oﬀ.

USB Audio Class

This sets the USB Audio Class for the USB Audio input.
USB Audio Class 1.0 (default) works with USB 1.1 ports and supports up to 24-bit/96kHz.
USB Audio Class 2.0 requires a USB 2.0 port and can support up to 32-bit/384kHz (asynchronous) and up to DSD-256. Depending on your PC or laptop you may require an additional driver.
For more info about USB Audio see our online guide.

Tone Control

We’ve tuned Evo to deliver Great British Sound, however we realise how personal and subjective listening can be so we’ve added a digital tone control to allow you to tailor the sound of Evo to your own preference. If you’d rather leave your sound untouched, you can disable the tone control completely and audio will bypass all processing, leaving Evo performing exactly as we tuned it.
Note : Tone control will not aﬀect DSD streams and will not be present on Bluetooth output.

Volume Limit
This sets the maximum volume that other streaming services like AirPlay, Spotify, TIDAL Connect and Chromecast built-in can set. The front panel, remote control and Stream Magic app volume controls can override this setting.

Early Update

Setting this to ‘On’ will let you try out the latest ﬁrmware ahead of general release.
For more information and to ﬁnd out what’s new visit our FAQ.

Firmware

This will check for and apply any new ﬁrmware available for your player.
You can also check for new updates on the info screen.
When left in network standby overnight your player will check and apply any new updates.

Factory Reset

This will return your player to its factory settings.
You can also do this from the info screen.

Note : Your network player must be connected to the internet to carry out ﬁrmware updates. It is recommended that you keep your network player
connected to ensure optimal performance.

Requires software version 124-a-018 or higher

Info screen

Evo all one player / info screen

The info screen shows useful information about your player, it also allows you to carry out some actions to help resolve problems with your player.
To access the info screen hold the button on the front panel for 2 seconds

Technical speciﬁcations

Evo all one player / technical speciﬁcations

Evo 75

POWER OUTPUT : 75W into 8 Ohms
AMPLIFICATION : Class-D
DAC : ESS Sabre ES9016K2M
FREQUENCY RESPONSE : 20Hz –20kHz +/-3dB
ANALOGUE AUDIO INPUTS : 1 x RCA
DIGITAL AUDIO INPUTS : 1 x TOSLINK optical, 1 x S/PDIF coaxial, Bluetooth (integrated), 1 x TV ARC
Bluetooth : 4.2 A2DP/AVRCP supporting SBC, aptX and aptX HD codecs

COMPATIBILITY

TOSLINK optical: 16/24bit 44.1-96kHz PCM only
S/PDIF coaxial : 16/24bit 44.1-192kHz PCM only
ARC: 16/24bit 44.1-192kHz PCM only
UPnP, Local USB media, Airplay 2, Chromecast built-in, Internet Radio, Spotify Connect, TIDAL, Qobuz, Amazon Music, RoonReady.
AUDIO FORMATS : ALAC, WAV, FLAC, AIFF, DSD (x256), WMA, MP3, AAC, HE AAC AAC+, OGG Vorbis
OUTPUTS : Speakers, 3.5mm headphone, Preamp Output, Subwoofer Output, Bluetooth (integrated)
Bluetooth: 4.2 A2DP/AVRCP supporting up to aptX HD
ETHERNET : IEEE 802.3, 10 Base-T or 100 Base-T
WI-FI : Dual-Band 2.4/5GHz
MAX POWER CONSUMPTION : 400W
STANDBY POWER CONSUMPTION : <0.5W
DIMENSIONS (W x H x D) : 317 x 89 x 352 mm
WEIGHT : 5Kg

Evo 150

POWER OUTPUT : 150W into 8 Ohms
AMPLIFICATION Class-D
DAC : ESS Sabre ES9018K2M
FREQUENCY RESPONSE: 20Hz –20kHz +/-3dB
ANALOGUE AUDIO INPUTS : 1 x RCA, 1 x Balanced XLR, 1 x MM Phono

DIGITAL AUDIO INPUTS
2 x TOSLINK optical, 1 x S/PDIF coaxial, Bluetooth (integrated), 1 x TV ARC, USB Audio

USB Audio: USB Type B conforming to USB Audio Class 1 or USB Audio Class 2 (user selectable)
Bluetooth : 4.2 A2DP/AVRCP supporting SBC, aptX and aptX HD codecs

COMPATIBILITY

TOSLINK optical : 16/24bit 44.1-96kHz PCM only
S/PDIF coaxial: 16/24bit 44.1-192kHz PCM only
ARC: 16/24bit 44.1-192kHz PCM only
USB Audio Class 1: Up to 24-bit 96kHz (asynchronous)
USB Audio Class 2: Up to 32 bit 384kHz (asynchronous) and up to DSD-256
UPnP, Local USB media, Airplay 2, Chromecast built-in, Internet Radio, Spotify Connect, TIDAL, Qobuz, Amazon Music, RoonReady.

Note : USB media maximum current 1A

AUDIO FORMATS
ALAC, WAV, FLAC, AIFF, DSD (x256), WMA, MP3, AAC, HE AAC AAC+, OGG Vorbis

OUTPUTS
Speakers A+B, 3.5mm headphone, Preamp Output, Subwoofer Output, Bluetooth (integrated)

Bluetooth: 4.2 A2DP/AVRCP supporting up to aptX HD
ETHERNET : IEEE 802.3, 10 Base-T or 100 Base-T
WI-FI : Dual-Band 2.4/5GHz
MAX POWER CONSUMPTION : 700W
STANDBY POWER CONSUMPTION : <0.5W
DIMENSIONS (W x H x D) : 317 x 89 x 352 mm
WEIGHT : 5.3Kg

Troubleshooting

Evo all one player / troubleshooting

If you experience any trouble with your Evo, visit the help section on our webpage at http://techsupport.cambridgeaudio.com

If you have trouble connecting the Evo to your network, these steps may help to resolve the problem:

Conﬁrm that a connected computer can access the Internet (i.e. can browse the web) using the same network.
If you have an encrypted Wi-Fi network, check that you have entered the correct key or passphrase. Remember that text-format keys are case sensitive.

If your Evo can connect to the network successfully but is unable to play particular Internet Radio stations, it may be due to one of the following causes:

The station is not broadcasting at this time of the day (remember it may be located in a diﬀerent time zone).
The station has reached the maximum allowed number of simultaneous listeners.
The station is not broadcasting anymore.
The Internet connection between the server (often located in a diﬀerent country) and you is too slow.

If you have problems with UPnP playback check the following:

Ensure your chosen UPnP server software is capable of serving the ﬁle type you are trying to access. Some servers do not serve FLAC for instance.
Evo can only play non DRM ﬁles. Files that have DRM controls cannot be played by Evo. Some servers may be able to authorize and de-crypt
Microsoft Plays For Sure before then serving the content to Evo, but this operation is not guaranteed as it is purely a function of the server.
If attempting to play 24-bit WAV or FLAC content a wired Ethernet connection is normally required for reliable operation due to bandwidth considerations.
Check Evo is capable of playing back the ﬁle type you are trying to access.

If you have problems with USB Media playback check the following:

Check Evo is capable of playing back the ﬁle type you are trying to access.
For USB Media Evo can only play non DRM ﬁles. Files that have DRM controls cannot be played.
Check that your device does not require more than 1A if it is powered from the USB socket itself.
Check your device format is supported by Evo.
The way you organise your USB media aﬀects how eﬃciently Evo can browse the content. A good practice is to create folders for Artists within which you should have sub folders for each Album which then contain the tracks for that Album. Libraries with thousands of tracks in one folder will progressively slow down Evo’s media browsing.

A TV connected to a digital input has dropouts, glitches or disrupted audio.

Some TVs have been found to have issues on digital inputs. Enabling TV mode in the StreamMagic app for the digital input connected to a TV should reduce the chance of audio issues from the TV.

MQA tracks do not display as MQA on the front panel.