SHENZHEN SHENGLAI TECHNOLOGY CO LIMITED ODV009-BLK Bluetooth Headphone User Manual

SHENZHEN SHENGLAI TECHNOLOGY CO LIMITED ODV009-BLK Bluetooth Headphone

Specifications

• Model: ODV009
• Available Colors: Black (8338108), Blue (7156169), Red (6737654)
• Features: Headphone, Charging port, LED indicator

Product Usage Instructions:

Charging the Headphone
To charge the headphone:

1. Attach the small end of the USB cable to the charging port on the headphone.
2. Attach the other end to a USB port on a computer or USB charging adapter.
3. A red light will turn on while the speaker is charging and turn off once charging is complete.

Pairing the Headphone
To pair the headphone with an IOS or Android device:

1. Go to SETTINGS > BLUETOOTH (Make sure Bluetooth is turned ON).

Controls

• Power On/Off: Hold down the power button until the LED indicator flashes blue to turn on/off the product.
• Play/Pause music: Press the Play/Pause button to pause/resume music playback.
• Volume + / Next track: Press to increase volume, hold for next track.
• Volume – / Previous track: Press to decrease volume, hold for previous track.
• Call controls: Press once to accept a call, again to decline. Press and hold to reject an incoming call.
• MicroSD Card Mode: Press the power button twice to switch to card reader mode. Press twice again to return to Bluetooth mode.

Frequently Asked Questions (FAQ)

• How do I know when the headphone is fully charged?
  A red light will turn on while the speaker is charging and turn off once charging is complete.

• Can I use the headphone with a MicroSD card to play music?
  Yes, you can switch to MicroSD Card Mode by pressing the power button twice. The headphone will then play music tracks stored on the MicroSD card.

Blue tooth Headphone

User Manual

• Model# ODV009-BLK ltem# 8338108
• Model# ODV009-BLU ltem# 7156169
• Model# ODV009-RED ltem# 6737654

Features

• Headphone
• Charging port
• LED indicator

Contents

• Headphone
• USB charging cable
• User Manual

A Quick Look

Charging the Headphone

• To charge the headphone, attached the small end of the usb cable to the charging port located on the headphone.
• Attached the other end to the USB port on a computer, USB charging adapter.
• A RED light will turn ON while the speaker is charging and turn OFF once charging is complete.

Pairing the Headphone

• When you turn your headphone on, it will starts to flash Red and Blue alternately.
• Open your smartphone’s Bluetooth menu to enable Bluetooth and search for Bluetooth devices. Select “ODV009” from the list of devices.
• After sucessfully pairing, you will hear a voice prompt from the headphone.

On an IOS or Android Device
Go to SETTING>BLUETOOTH
(Make sure Bluetooth is turned ON)

Controls

• Power On/Off
  To turn on the product, hold down the power button until the LED indicator flashes Blue. Hold down the button again to turn off the product.

• Play/Pause music
  When playing music, press the Play/Pause button to pause the music, press again the same button to resume playing the music.

• Volume + / Next track
  Press the Volume + / Next track button to increase the music volume. Hold down the same button if you want to advance to the next track.

• Volume – / Previous track
  Press the Volume – / Previous track button to decrease the music volume. Hold down the same button if you want to return to the previous track.

• Call controls
  When receiving an incoming call, press the Call button once to accept call, press again to decline call. If you press and hold the Call button, it will reject the incoming call instead of picking it up.

• MicroSD Card Mode
  Press the power button twice to enter card reader mode. The headphones will then begin playing the music tracks stored in the microSD card. Press the power button twice again to return to Bluetooth mode.

Distributed by: Veyer, LLC
6600 N. Military Trail Boca Raton, FL 33496 USA Ativa is a trademark of The Office Club, LLC. © 2024 Veyer, LLC. All rights reserved. Made in China

FCC Statement

FCCID: 2AL9B-ODV009

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in the portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>