TOOL KLEAN TK-2-ST Anti Microbial UV Light Stik Sanitizer User Guide
- June 1, 2024
- TOOL KLEAN
Table of Contents
TOOL KLEAN TK-2-ST Anti Microbial UV Light Stik Sanitizer User Guide
Specifications:
Unit Dimensions 1.75″ W X 14.5″L X 1.25″H
Unit Weight 1.5 lbs
Boxed Dimensions 14.75″ L X 2″ W X 1.5″ H
Boxed Weight 2 lbs
Power 4 Watts
Input 100-240V, 50/60 HZ, 0.2 A
Output 5V-1A
Bulb Life 10,000 hrs
Bulb Wavelength 254 nm
Bulb Intensity 1198 uw/cm2
Timer 5/15/30 Min Digital Display
USB Cord AC/DC Adapter
Lithium Ion Rechargeable Battery
Durable injection molded plastic body Easy grip safety handle
Accessories Included:
UV Light Stik Kit includes bulb cleaning cloth, UV protective gloves and
glasses, Stik pouch, adapter
Maintenance:
- Only use UV Bulb Cleaning Cloth (included) to clean bulb surface from fingerprints, dirt, debris.
- Clean UV Stik with soft dry cloth. Do not use water, wipes, or wet cleaners.
- Only recharge batteries if needed, do not overcharge.
- Do not remove lithium ion battery from UV Stik.
- If bulb breaks do not come in contact with glass, filaments, or mercury from bulb. Dispose of bulb according to your state and local disposal requirements for hazard waste. Do not breathe in mercury vapors.
- To change bulb, see maintenance video at www.toolklean.com/service
Trouble Shooting:
UV Light Stik does not turn on.
Hand Tools & Surfaces:
The Tool Klean Anti-Microbial UV Light Stik does not produce heat or ozone and
is safe on any material.
Usage Time: Expose subject area or tool for at least 90 seconds for optimum efficiency using a low slow sweep of surfaces.
Effectiveness: The UVC Light Stik features highly reflective aluminum surrounding the bulb, which helps kill germs quickly and efficiently. The UVC Light Stik is excellent for hard to reach spaces and corners as well as flat surfaces. For optimum effectiveness, clean surfaces from dust & debris before use .
Directions For Use:
- Plug charger into UV Light Stik and power outlet. Red indicator means the Stik needs to charge. Green indicator means it is fully charged.
- Remove the blue bulb protective cover before operating.
- Turn ON – Press and hold Pause button until the Stik turns on.
- Select TIME (5 – 30 minutes), press and hold Menu Select button until minute selection blinks. Press Menu Select button again to choose setting. Press Pause button to set time. Note: if error message 5E lights, reset timer.
- Turn OFF – Press and hold Pause button to turn off.
- Safety Feature – UV Light Stik will automatically go off if it is turned upward.
Warranty: 1 year limited warranty covers manufacturer defects only. Bulbs are not included. Email: info@toolklean.com for warranty issues. .
SAFETY:
- Do not use directly on people, animals, plants, fish, reptiles.
- Keep out of reach of children.
- Unplug charger when not in use.
- Never pull plug out of outlet by the cord.
- Disconnect adapter when finished charging.
- Never use in a wet environment or put in water.
- Wear UV protective gloves and glasses when using.
- Automatic shut off when turned upwards toward eyes as safety feature.
- If bulb breaks do not come in contact with glass, filaments, or mercury from bulb. Do not breathe in vapors from mercury.
- Never use cleaning solutions, water, or harsh towels to clean UV Light Stik.
- Avoid reflective surfaces like mirrors or stainless steel unless skin is covered and UV glasses are used for eye protection.
- The UV bulb is coated with a Shatterproof Safety
- Film (SSF) which helps prevent bulb shattering, mercury vapors, and contains the broken pieces if the bulb should break.
- Never use your fingernail to press digital buttons.
- Do not remove battery cover or come in contact with Lithium Ion battery.
- Do not allow UV Light Stik to be stored without charging battery for more then 2 months. Store in cool, dry place.
Microchem US Lab Testing Results:
The Tool Klean Anti-Microbial UV Light Stik (TK-2-ST) was tested in a
laboratory controlled environment for a 90 second sweep resulting in (S.
aureus) Staph bacteria kill at 99.96%, (S. enterica) Salmonella bacteria kill
at 99.99%, (T. interdigital) Fungus (Ringworm) 99.9997%.
www.toolklean.com,
info@toolklean.com,
800-706-1766
Tool Klean, Inc. is proud to be a USA company! Our Products are US tested,
produced, assembled (from foreign-made parts), packaged, and labeled according
to
strict EPA & FCC regulations.
Tool Klean EPA Registration # 94836 EPA Establishment #94836-NY-1 Microchem Lab Tested for Efficacy
-
This device complies with Part 18 of the FCC Rules: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help. -
This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.4530 MHz.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>