Thomson ROC1128PAN Replacement Remote Control User Manual

Thomson ROC1128PAN Replacement Remote Control

Product Information

The Replacement Remote Control 00132677 is compatible with most Panasonic TVs, including TV/LCD/LED/HDTV. It has a dimension of 214 x 50 x 83 g 23 mm and saves the settings during battery change. The remote control has a learning function that allows you to learn functions of your original remote control.

• Input Code List
  The input code list for the remote control includes 48 codes from 001 to

48. If the code is invalid, the LED flashes twice and then lights up permanently.

• Fast Search
  The fast search function allows you to search for the correct code for your TV. To use this function, press and hold the key [MUTE] and [POWER] until the LED is lit, then release the keys. Press the key [CH+], and each time you press it, the remote will search once. When the code changes, test if [POWER], [VOL+],[MENU],[0-9] keys work well. If they do, press [MUTE] to save the code and exit. If it doesn’t work well, repeat the fast search by pressing [CH+].

• Code Inquiry
  You can use the code inquiry function to find out which code is currently set. To use this function, press and hold [MUTE], then press [POWER] until the LED is lit, then release the keys. Input [9].[9].[0] with number keys. The LED will flash twice and goes off. Press the number key 1 for the 1st digit of the code. The LED will start to flash. Count the LED flashes. The number of flashes resembles the code’s first digit. Repeat this procedure for the 2nd and 3rd digit of the code: 2nd digit -> enter 2 -> count LED flashes 3rd digit -> enter 3 -> count LED flashes lf code number is [0] the LED will not flash.

• Compatible Remote Control Model
  The replacement remote control is compatible with various Panasonic TV models, including TV/LCD/LED/HDTV. Refer to page 74 of the manual for more details.

Product Usage Instructions

To use the Replacement Remote Control 00132677, follow the instructions below:

1. Insert batteries into the remote control.
2. Press and hold the key [MUTE] and [POWER] until the LED is lit, then release the keys.
3. Enter the three codes from the input code list. When the code input is finished, the LED will turn off.
4. Press [MUTE] to save the code and exit. If it doesn’t work well, try other codes from the input code list.
5. To reset to factory settings, press and hold the [RETURN] and [0] buttons for about 5 seconds until the status LED flashes three times and then goes out.
6. The remote control has a learning function that allows you to learn functions of your original remote control. To use this function, follow the instructions under “Learn Mode” in the manual.

Thank you for your decision for a Thomson product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. This remote control can by default control 90% models of PANASONIC brand, there´s no need to set it up. lf the remote doesn‘t work, please choose one of the setup methods described in chapter 5.

The keys

1. Power TV ON/OFF/LED
2. Turn your TV sound ON/OFF
3. TV Mode
4. AV Mode
5. Streaming app menu
6. LINK
7. Show the Electronic Program Guide (if supported by the TV)
8. Tools menu
9. HOME
10. Exit Menu
11. Menu
12. Internet
13. SD/USB Mode
14. Option and Tools
15. Back key
16. Enter
17. Use when watching TV to see what´s on other channels or to highlight/select OnScreen options
18. Use to select a variety of on screen options
19. Volume + / –
20. Program +/-
21. Teletext ON/OFF
22. Teletext Subtitle
23. Teletext Info
24. Teletext Hold
25. Numeric keys 0 – 9 to enter channel numbers
26. Access to 2- or 3-digit channel numbers
27. Previous Channel
28. Info
29. Normal
30. Picture Size
31. Goes backward (DVD, BlueRay … )
32. Play a disc (DVD, BlueRay … )
33. Fast Forward (DVD, BlueRay …)
34. Player Preview (DVD, BlueRay …)
35. Player Next (DVD, BlueRay …)
36. Suspends play and stops on an image (DVD, BlueRay…)
37. 3D Mode ON/OFF
38. Stop the disc (DVD, BlueRay … )
39. Record

Explanation of the Note and Warning symbol

• Warning
  This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

• Note
  This symbol is used to indicate additional information or important notes.

Package Contents

• Replacement Remote Control
• 2x AAA Batteries
• This operating instructions incl. Code List

Safety notes

• Do not use the Universal Remote Control in moist or wet environments and avoid spraywater contact.
• Do not expose the Universal Remote Control to heat sources or direct sunlight.
• Do not drop the Universal Remote Control.
• Never open the Universal Remote Control. It contains no user-serviceable parts.
• As with all electrical devices, keep the Universal Remote Control away from children.

Warning

• When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Do not allow children to change batteries without supervision.
• Remove the batteries from products that are not being used for an extended period.

Getting started – installing the Batteries

• Note
  • Use 2 AAA batteries
  • Remove the battery cover from bottom of remote.
  • Check the +/- polarity on the batteries and inside the compartment.
  •  Insert the batteries.
  • Slide the battery holder back into the remote until the clips locate.
• Note – Code Memory
  This remote control saves the settings during battery change.

Setup

This remote control can by default control 90% models of PANASONIC brand, there´s no need to set it up. lf it doesn‘t work, please choose one of the following setup methods 5.1 or 5.2.

INPUT CODE CODE List:
001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011, 012, 013, 014, 015, 016, 017, 018, 019, 020, 021, 022, 023, 024,025, 026, 027, 028, 029, 030, 031, 032, 033, 034, 035, 036, 037, 038, 039, 040, 041, 042, 043, 044, 045, 046, 047, 048

1. Press and hold the key [MUTE] and [POWER] until the LED will be lit, then release keys.

2. Enter the three codes from code List. When the code input is finished, the LED will turn off.

3.  Please try to use the remote control. If it doesn‘t work well, please try other codes: [002], [003], [004] …
   Note
   If the code is invalid, the LED flashes twice and then lights up permanently. To exit the setup, please press [MUTE].

FAST SEARCH

1. Press and hold the key [MUTE] and [POWER] until the LED will be lit, then release keys.

2. Press the key [CH+]. Each time you press, the remote will search once.
   When the code changes, you can test if [POWER], [VOL+],[MENU],[0-9] keys work well. If ok ,please press [ MUTE] to save the code and exit.

3. If it doesn‘t work well, repeat the fast search by pressing [CH+].

CODE INQUIRY
Use the following method to find out which code is currently set:

1. Press and hold [MUTE], then press [POWER] until the LED will be lit, then release keys.
2. Input [9].[9].[0] with number keys. The LED will flash twice and goes off.
3. Press the number key 1 for the 1st digit of the code. The LED will start to flash.
   • Count the LED flashes. The number of flashes resemble the code‘s first digit.
   • Repeat this procedure for the 2nd and 3rd digit of the code:
   • 2nd digit -> enter 2 -> count LED flashes
   • 3rd digit -> enter 3 -> count LED flashes
   • lf code number is [0] the LED will not flash.

Compatible Remote Control Model
Due to too many Remote Control models, we only Iist some of them below. lf your remote control is similar to the drawing, the replacement remote can control your TV (Page 74)..

Resetting to factory settings
Press and hold the [RETURN] and [0] buttons for about 5 seconds until the status LED flashes three times and then goes out. The remote control is now successfully reset to the factory settings.
Note
All keys with learnt codes or all copied keys, as well as all remote control settings will be deleted.

LEARN MODE

This remote control is equipped with a learning function. Thus, you could learn functions of your original remote to this remote control.

BEFORE STARTING LEARN MODE

• The batteries in the two remote controls have to be in good condition. Replace them if necessary.
• Place the remote controls with the infrared diodes so that they point towards each other.
• Where necessary adjust the height of both remotes so that infrared diodes are properly aligned.
• The distance between the remote controls should be about 3 cm.

Note

• Do not move the remote controls during the learning procedure.
• Ensure that the room is not lit by fluorescents tubes or low energy consumption lamps since such light sources could interfere with the copying.
• The 2 remote controls must be at least 1 meter away from any light source.
• During learning mode, if no key is selected for more than 15 seconds, the learning mode will exit automatically or if no other remote signal is received.
• Each function key will hold only one command. A new command to be learned will automatically replace the previous one.

ENTER LEARN MODE

1. Press and hold the [MUTE] and [VOL+] keys for approx. 5 seconds until the LED will be lit.

2. Enter the code [9] [8] [0], the LED will flash 2 times and then remain on.

3. The remote control is now ready to learn new commands.

LEARNING OF KEYS

1. Press and release the desired key on the original remote control which you want the command to be learned. The LED at your replacement remote will flash to confirm that the information has been received.
2. Then press and release the target key on the remote control you want learned.
3. If the LED flashes 3 times and then remain on, the command has been learned successfully.
4. Repeat these steps to learn other key functions.
5. Press the [MUTE] and [VOL-] buttons to save all learnt functions and to exit the learning mode.
   Note
   While replacing the batteries, the remote control will keep the functions of the learned keys.

CLEARING OF LEARNED KEYS

1. CLEARING OF ONE LEARNED KEY

2. Press and hold [MUTE] and [VOL+] keys for 5 seconds until the LED will be lit.

3. Enter the code [9] [8] [1], the LED will flash 2 times and then remain on.

4. Press and release the desired key at the replacement remote control which you want to clear the learned command. If the LED flashes 3 times, the learned command has been cleared successfully.

5. CLEARING OF ALL LEARNED KEYS

6. Press and hold [MUTE] and [VOL+] keys for 5 seconds until the LED will be lit.

7. Enter the code [9] [8] [2], the LED will flash 2 times and then remain on.

8. Press and release the [OK] key at the replacement remote control. If the LED flashes 3 times, all commands have been cleared successfully.

SIMPLE Mode

This remote control is equipped with an SIMPLE Mode. Thus you could reduce the functionality of the remote control to its basic functions. It avoids that the TV Settings are changed by mistake.
During the SIMPLE Mode you still could use following keys:

Enter SIMPLE Mode

1. Press and hold [MUTE] and [VOL+] keys for 5 seconds until the LED will be lit.

2. Enter the code [9] [7] [0], the LED will flash two times and then remain on.

3.  Press and release the [OK] key, if LED flash 3 times, you have entered the SIMPLE Mode successfully.

Exit SIMPLE Mode

1. Press and hold [MUTE] and [VOL+] for 5 seconds until the LED will be lit.

2. Enter the code [9] [7] [0], the LED will flash two times and then remain on.

3. Press and release the [EXIT] key, if LED flash 3 times, you have exit the SIMPLE Mode.
   Note

   • While the SIMPLE Mode is activated only the keys mentioned in chapter 7 will work.
   • If one of these keys is pressed the LED will be lit until the key is released. If one key is pressed during the normal mode, the LED will flash.

Maintenance

• Do not mix new and used batteries for powering the Universal Remote Control, as old batteries tend to leak and may cause power drain.
• Do not use corrosive or abrasive cleansers on your Universal Remote Control.
• Keep the Universal Remote Control dust free by wiping it with a soft, dry cloth.

Troubleshooting

• Q. My Universal Remote Control does not work at all!

  • A. Check your TV. If the TV main switch is turned off, your Remote cannot operate your TV.
  • A. Check whether your batteries are inserted properly and are in the correct +/- position.
  • A. Check whether you have pressed the corresponding device mode key for your device.
  • A. If the batteries are low, replace the batteries.

• Q. My TV responds only to some of the commands.
  A. Try other codes until most keys work properly.

• Q. Some keys of the Remote Control do not work anymore?
  A. Maybe the SIMPLE Mode had been activated. Deactivate the SIMPLE Mode as explained in chapter 7.2.

Warranty Disclaimer

The manufacturer assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.

• Hotline: +49 9091 502-115 (German/English)
• Further support information can be found here: www.hama.com

Recycling Information Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.

MORE MODELS

References

• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>