ASHLEY T169-9 Living Room Rusitori Lift-Top Coffee Table User Manual
- June 10, 2024
- Ashley
Table of Contents
T169-9 Living Room Rustier Lift-Top Coffee Table
User Manual
T169-9 Living Room Rusitori Lift-Top Coffee Table
IMPORTANT SAFETY NOTICE: READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Be sure to check all packing materials carefully for small parts may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. Periodically check to ensure that all connectors (bolts, screws, etc.) are tight. Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
- When assembling products that have electric cords (lamps, light, sure the electrical cord is unplugged before assembly and (2) be electrical cord during assembly.
- When assembling shelves or entertainment centers, do not stand order to assemble upper shelves—use a step ladder.
- Do not stand on tables, including but not limited to, end tables, coffee dinner tables, as tables are not to support the weight of a person.
- Where assembly instructions state that the assembly requires two or attempt by yourself as there is a risk of injury.
etc.), always (1) make careful not to twist the on lower shelves in tables, and more people, do not
NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR
DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY
INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.
NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN
THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY
BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
NOTE: HARDWARE ARE STORED UNDERSIDE TABLE
NOTE ASSEMBLY INSTRUCTION FOR MULTIPLE UNITS, THE PARTS/LABEL INDEX ARE
SEPARATED FOR DIFFERENT UNITS THE PARTS ARE LOCATED INSIDE THE BOX AS BELOW
NOTE: Level the table and tighten all bolts with the alien wrench.
SIGNATURE DESIGN BY ASHLEY®
All Rights Reserved. Oct, 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>