milwaukee 2726-20 M18 Hedge Trimmer User Manual

: June 10, 2024
: Milwaukee

milwaukee 2726-20 M18 Hedge Trimmer

milwaukee-2726-20-M18-Hedge-Trimmer-product

Product Information

M18 Hedge Trimmer

The M18 Hedge Trimmer is a battery-operated power tool designed for trimming hedges and bushes. It is a cordless tool that does not require a mains power supply. The product is lightweight and portable, making it easy to use for extended periods without fatigue. The hedge trimmer comes with a charger and a rechargeable battery pack.

General Power Tool Safety Warnings

Before using the M18 Hedge Trimmer, read all safety warnings, instructions, illustrations, and specifications provided with the power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

Work Area Safety

Ensure that the work area is well lit, and keep the work area clean and free of clutter. Do not operate the hedge trimmer in wet or damp conditions. Keep children and bystanders away from the work area. Use appropriate personal protective equipment (PPE) such as safety glasses, dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.

Electrical Safety

Use an extension cord suitable for outdoor use. Use of a less likely to bind and are easier to control. Do not expose the hedge trimmer to rain or wet conditions. Do not touch the plug or the battery pack with wet hands. Do not modify the plug in any way. Do not use any adapter plugs or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Battery Tool Use and Care

Use only the charger and rechargeable battery pack provided by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with other battery packs. Use of any other battery packs may create a risk of injury and fire. Ensure that the battery pack is fully charged before using the hedge trimmer. Do not short the battery terminals together, as this may cause burns or a fire.

Product Usage Instructions

Ensure that the hedge trimmer is fully charged before use.
Inspect the hedge trimmer for any damage or signs of wear before use.
Wear appropriate personal protective equipment (PPE) such as safety glasses, dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Choose the appropriate blade length for the task at hand.
Hold the hedge trimmer with both hands, one hand on the front handle and the other on the rear handle.
Switch on the hedge trimmer by pressing the trigger switch located on the rear handle.
Begin trimming the hedge or bush, moving the blade back and forth in a sweeping motion.
Ensure that the blade does not come into contact with any objects that could damage the blade or cause injury.
Switch off the hedge trimmer by releasing the trigger switch.
Clean the hedge trimmer and store it in a dry place.

WARNING: To reduce the risk of injury, user must read and understand operator’s manual.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing orjewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR HEDGE TRIMMERS

DANGER

Keep hands away from blade.
Contact with blade will result in serious personal injury. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turned off. A moment of inattention while operating the trimmer may result in serious personal injury.
Use both hands when operating the trimmer. Using one hand could cause loss of control and result in serious personal injury.
Carry the trimmer by the front handle with the cutter blade stopped. When transporting or storing thetrimmer always fit the cutting device cover. Proper handling of the trimmer will reduce possible personal injury from the cutter blades.
Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring. Cutter blades contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Do not use tool while standing on a ladder, rooftop, or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.
Always wear eye protection, hearing protection, and protective clothing and footwear. Wear heavy, long pants, long sleeves, boots, and gloves. Contain long hair. Do not wear loose clothing or jewelry. Do not wear short pants, sandals, or go barefoot.
Risk of eye injury. Keep bystanders at least 15′ away during use. Objects may be thrown or ricocheted in all directions.
Handles and guard must be properly installed during use. Using the trimmer without both handles and the guard installed can result in serious personal injury.
Use both hands when operating the trimmer. Maintain a firm grip. Using one hand could cause loss of control and result in serious injury.
Do not use guard as a handle.
Before starting the trimmer check the work area for hidden objects, such as wires, fencing, etc. Striking a solid object could cause loss of control and serious personal injury.
Do not start the trimmer with blade in contact with an object. Allow tool to reach full speed before starting the job.
Never cut any material with a diameter larger than 3/4″. The tool may stall or kick back, causing a risk of injury.
Always turn off the tool between cuts or when transporting from one location to another. Do not carry tool with finger on the trigger. Accidental starting can cause serious personal injury.
Before setting down the tool, turn the switch off, ensure the blade has stopped, and remove the battery pack.
Keep tool clean of trimmings and debris.
Always remove the battery pack when tool is not in use.
Never use a hose to clean the tool. Keep handles dry, clean, and free from debris. See “Maintenance” for cleaning instructions.
Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that could result in a dangerous outcome. Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained professional for additional information or training.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

_ WARNING: _Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SYMBOLOGY

Volts
Direct Current
No Load Strokes per Minute (SPM)
Safety Alert Symbol
Read Operator’s Manual
Always wear eye protection, hearing protection, and protective clothing and footwear.
Always wear gloves and personal protective equipment.
Keep hands, feet, and body away from blade.
Do not use in rain or wet locations.
Keep bystanders 15′ away during use.
UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No ………………………………………………. 2726-20
Volts …………………………………………………….. 18 DC
Battery Type …………………………………………..M18™
Charger Type …………………………………………M18™
Blade Length ……………………………………………… 24″
Cutting Capacity (diameter) ………………………… 3/4″
Cutting Speed ………………………………… 3,400 SPM
Recommended Ambient
- Operating Temperature ………………….0°F to 125°F

FUNCTIONAL DESCRIPTION

Blades
Guard
Front handle
Lock-off button
Trigger handle
Trigger

ASSEMBLY

WARNING: Recharge only with the charger specified for the battery. For specific charging instructions, read the operator’s manual supplied with your charger and battery.

Removing/Inserting the Battery

To remove the battery, push in the release buttons and pull the battery pack away from the tool.

WARNING

Always remove battery pack before changing or removing accessories. To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place.
Only use accessories specifically recommended for this tool. Others may be hazardous.

Blade Cover

Always place the blade cover over the blade before moving from one job to another, storing or transporting the tool.
WARNING: Blade is sharp. Keep hands and body away from blade.

Remove battery pack.
Slide the blade cover over the blade. It may be necessary to push with some force as blade cover reaches the front guard.
To remove, pull blade cover off of blade. It may be necessary to pull with some force until cover clears the detent near the guard.

_ WARNING: _Always turn off the tool between cuts or when transporting from one location to another. Do not carry tool with finger on the trigger. Accidental starting can cause serious personal injury.

Transporting

Always remove the battery pack and cover the blade before transporting. Carry tool by the front handle, with blade behind you. Do not carry tool by trigger handle.

WARNING: To reduce the risk of injury, always remove the battery pack from the tool before lubricating.

Lubricating the Blade

To extend cutting life, lubricate the trimmer blades before and after each use and before storing.

Remove the battery pack.
Apply a lightweight machine oil along both sides of the top blade.

OPERATION

WARNING: To reduce the risk of injury, always wear proper eye protection marked to comply with ANSI Z87.1. Use only recommended accessories. Others may be hazardous. To reduce the risk of injury, user must read operator’s manual. Risk of eye injury. Always wear eye protection, hearing protection, and protective clothing and footwear. Keep bystanders at least 15′ away during use. Objects may be thrown or ricochet in all directions. Avoid accidental startup; do not pick up or carry tool by trigger.

Starting and Stopping the Tool

Always remove the blade cover before use.
Hold the front and trigger handles securely.
- WARNING: Blade is sharp. Keep hands and body away from blade.
To start the tool, push the lock-off button down while pulling the trigger. Allow the motor to reach full speed before starting to cut.
To stop the tool, release the trigger.
Always wait for blades to stop before setting down.

WARNING

To reduce the risk of injury, always keep both hands on the handles.
Do not remove cut material or hold material to be cut when blades are moving.

Cutting Tips

DANGER: Never cut near electric cords or lines. If blade cuts into or jams on any electrical cord or line, CUTTER BLADES MAY BECOME “LIVE” AND SHOCK THE OPERATOR! Disconnect the electrical service to the electrical line before attempting to free the blade from the line. Contact with the blade, line, or another live electrical part could result in death or serious injury. Before starting the tool check the work area for hidden objects, such as wires, fencing, etc. Striking a solid object could cause loss of control and serious personal injury.

The tool can be held in multiple orientations depending on the grip used on the front handle.
Use a sweeping, back and forth motion, moving down or across the work.
Move the tool at a slower pace when cutting thicker branches. Do not force the tool. The blade will slow and could bind.
Do not cut branches with a diameter greater than 3/4″. Use a Sawzall® or Hackzall® reciprocating saw with a pruning blade for thicker branches.
If blades jam, stop the tool and remove the battery pack.
- WARNING: Use caution when removing debris from the blades.
For straight cuts, stretch a string along the work area just below the desired cut height. Use the string as a guide when cutting. Hold the tool at a 0° to 10° angle when cutting a flat top.

MAINTENANCE

WARNING: To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tool

Keep your tool, battery pack and charger in good repair by adopting a regular maintenance program. Inspect your tool for issues such as undue noise, misalignment or binding of moving parts, breakage of parts, or any other condition that may affect the tool operation. Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE service facility for inspection. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE service facility for repairs.

Sharpening Blade

Stop the tool so the teeth appear in an offset position (see picture).
Remove the battery pack from the tool.
Secure the blade in a vise and file the exposed cutting surface of each cutting blade tooth with a file. Do not change the cutting angle of the cutting teeth.
To sharpen the other side of the teeth, restart the tool to offset the teeth in the opposite position. Remove the battery pack before re-securing in the vise.

WARNING: To reduce the risk of personal injury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to flow inside them.

Cleaning

Clean dust and debris from vents. Keep handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and charger to the nearest authorized service center.

ACCESSORIES

WARNING

Use only recommended accessories.Others may be hazardous.
For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor.

CONTACTS

SERVICE – UNITED STATES

1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM – 6:30 PM CST or visit www.milwaukeetool.com

Contact Corporate After Sales Service Technical Support with technical, service/repair, or warranty questions.

Email: metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases.

SERVICE – CANADA

Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM – 4:30 PM CST or visit www.milwaukeetool.ca

LIMITED WARRANTY USA & CANADA

Every MILWAUKEE Outdoor Power Equipment Product* (see exceptions below) is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on an outdoor power equipment product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of three (3) years after the date of purchase unless otherwise noted. Return of the outdoor power equipment to a MILWAUKEE factory Service Center location or participating MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

Normal Wear: Many outdoor power equipment products need periodic parts replacement and service to achieve best performance. This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to trimmer head, trimmer head spool, cutting lines, blades, chains, blower tubes, brushes, o-rings, and seals. *This warranty does not cover Cordless Battery Packs or Reconditioned Product. There are separate and distinct warranties available for these products.

MILWAUKEE does not cover freight or labor charges associated with the inspection and testing of outdoor power equipment products which are found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a Milwaukee electric power tool.

WARRANTY POLICY

VALID ONLY FOR MEXICO, AMERICA CENTRAL AND THE CARIBBEAN

TECHTRONIC INDUSTRIES warranty is for 3 years from the original date of purchase. This warranty card covers any defect in material and workmanship labor on that Product. To make this warranty valid, present this warranty card, closed/sealed by the dealer or store where you purchased the product, to the Authorized Service Center (ASC). Or, if this card does not closed/sealed, present original proof of purchase to ASC. Call 55 4160-3547 to find the nearest ASC, for service, parts, accessories or components.

Procedure to make this guarantee valid

Take the product to ASC, together with the enclosed warranty card/ stamped by the dealer or store where you purchased the product, and any defective part or component will be replaced free of charge for you. We will cover all freight costs in connection with this warranty process.

exceptions

This guarantee will not be valid in the following situations:

When the product is used in a manner other than that indicated in the end user manual or instructions.
When the conditions of use are not normal.
When other persons not authorized by ELECTRONIC INDUSTRIES modify or repair the product.

Note: If the harness is damaged, it must be replaced. in an Authorized Service Center to avoid electrical risks.

SERVICE AND CARE CENTER

Call: 55 4160-3547

IMPORTED AND MARKETED BY

TECHTRONIC INDUSTRIES, MÉXICO, S.A. DE C.V.
Miguel de Cervantes Saavedra No.301 5th Floor, North Tower 11520 Colonia Enlargement Granada Miguel Hidalgo, Mexico City, Mexico

Model: ……………………………………………………
Date of purchase: ……………………………………………………
Distributor Seal: ……………………………………………………