CTA PAD-PARAF2WGRA Dual Enclosure Locking Floor Stand Kiosk User Manual
- June 10, 2024
- CTA
Table of Contents
CTA PAD-PARAF2WGRA Dual Enclosure Locking Floor Stand Kiosk User Manual
PACKAGE CONTENTS
INSTRUCTIONS
-
Install kiosk body to base
-
Align body channel with base holes. Screw in bolts from the bottom.
-
Placing or Removing Graphic Panels
-
Cable Management through Kiosk Body
-
Slide out back graphic slot from channel
-
While back panel is out, slide in device cord for cable management
-
Once cable management is set up, slide graphic slot back into place
-
Install Dual VESA Connection and Cable Routing
-
Before enclosures are screwed in, path the cording of the device through the the top enclosure opening into the hclow body and out the bottom opening
-
Line up holes of enclosure with body.
-
Screw in bolts with the holes aligned.
36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
888-733-4448 1
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>