HALCYON U972B3 Dimmable LED Wall Light Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON U972B3 Dimmable LED Wall Light
Product parameter
| Model No. | Voltage | Power | Color | Size(LWH):mm | Material | IP Grade |
|---|---|---|---|---|---|---|
| U972 B3 | 220-240VAC | 42W | 3000K | 43212045 | AL | IP 65 |
| U972 W3 | 220-240VAC | 42W | 3000K | 43212045 | AL | IP 65 |
Symbols
- Class I luminaire, requires earth. Nol Double insulated.
- LED light source.
- The WEEE symbol, indicating separate collection for WEEE-Waste of electrical and electronic equipment, consists of the cross-out wheeled bin.
- All the material used is up to standard.
- Working current.
SAFETY INSTRUCTIONS
Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance. Install as described.
Installation Instructions
Designed for Interior & Exterior use.
Take pride with installation. For exterior installation adhesive foam pad must
be used and cable entry gland/screw heads must be covered in silicone sealant.
Ensure installation surface is even so luminaire housing can be correctly
seated against intimal gasket without obstruction when tightened into place.
Failure to do so may cause luminaire failure from water ingress.
- Modification or misuse of the luminaire voids warranty.
- Do not connect luminaire to live power source.
- Take care during installation, incorrect connection may damage the luminaire resulting in reduced lifespan.
- Halcyon lighting is free to change the design specifications and instructions for assembly of the luminaire without notice.
- Halcyon Exterior products go through extensive waterproof testing prior to sale.
- All exterior luminaires (with the exception of copper) require periodic cleaning to protect the surface and/or coating from corrosion and ensure tidy appearance for the lifespan of the product. Wash with care using a soft brush and warm soapy water using a neutral detergent. Coastal areas require extra attention, especially fittings which are under eaves/soffits and do not have any exposure to rain. Do not use a water blaster or high pressure hose, do not submerge fittings for extended periods of lime. 316 stainless steel fittings will still develop surface rust or “tea staining” if left uncared for.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>