CTA ADD-PVM3 Clamp Pole with 3 Adjustable VESA Plates Instruction Manual
- June 10, 2024
- CTA
Table of Contents
CTA ADD-PVM3 Clamp Pole with 3 Adjustable VESA Plates
ADD-PVM3 Clamp Pole with 3 Adjustable VESA Plates
The ADD-PVM3 is a clamp pole with 3 adjustable VESA plates designed for a customized delivery service solution. It is not for use while driving.
Package Contents
- 1 Clamp Pole
- 3 Adjustable VESA Plates
Caution
Please be sure to fasten all the screws were tightened securely while using the stand. Please be sure to fasten all the screws were tightened while using the stand. Not for use while driving. **TABLET IN PICTURES FOR EXAMPLE ONLY AND NOT INCLUDED
Instructions
Connecting the Clamp and the Poles
- Screw up the small meter screws into the component of the Clamp.
- Align and insert the Pole into the top round holes on the bottom of the pole.
- Screw in the screw to connect both the pole and clamp component securely.
Assemble Clamp Components Together
- Align the preferred (2) screw holes of both clamp components. Then screw in both screws until securely tightened.
- Adjust the clamp and tightening rod to fit with different table/surface thickness.
Attaching adjustable VESA Plates onto Pole
Note: if the metal endcap of the handle rod of the ring is already in, unscrew before going through to the pole.
- Loosen all VESA Plate pole grips. Slide down each VESA plate to desired position then, tighten pole grip. Adjust VESA angle and orientation as preferred. Repeat steps for other VESA plates.
- Screw on clockwise metal endcap until securely tightened.
When attaching VESA compatible devices, use M6mm screws to connect with other VESA Devices.
When attaching VESA compatible devices
This VESA Plate Allows you to connect with other VESA Devices by screwing up the bolts as shown .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>